- Stokes parameters
The Stokes parameters are a set of values that describe the
polarization state ofelectromagnetic radiation (includingvisible light ). They were defined byGeorge Gabriel Stokes in1852 , as a mathematically convenient alternative to the more common description of incoherent or partially polarized radiation in terms of its totalintensity ("I"), (fractional)degree of polarization ("p"), and the shape parameters of thepolarization ellipse .Definitions
The relationship of the Stokes parameters to intensity and polarization ellipse parameters is shown in the equations below and the figure at right.
:
Here , and are the
spherical coordinates of the polarization state in the three-dimensional space of the last three Stokes parameters. is the total intensity of the beam, and is the degree of polarization. The factor of two before represents the fact that any polarization ellipse is indistinguishable from one rotated by 180°, while the factor of two before indicates that an ellipse is indistinguishable from one with the semi-axis lengths swapped accompanied by a 90° rotation. The four Stokes parameters are sometimes denoted "I", "Q", "U" and "V", respectively.If given the Stokes parameters one can solve for the
spherical coordinates with the following equations::
tokes vectors
The Stokes parameters are often combined into a vector, known as the Stokes vector::
The Stokes vector spans the space of unpolarized, partially polarized, and fully polarized light. For comparison, the
Jones vector only spans the space of fully polarized light, but is more useful for problems involving coherent light. The four Stokes parameters do not form a preferred basis of the space, but rather were chosen because they can be easily measured or calculated.The effect of an optical system on the polarization of light can be determined by constructing the Stokes vector for the input light and applying
Mueller calculus , to obtain the Stokes vector of the light leaving the system.Examples
Below are shown some Stokes vectors for common states of polarization of light.
:
:
:
:
:
:
:
Alternate explanation
A
monochromatic plane wave is specified by its propagation vector, , and the complex amplitudes of theelectric field , and , in a basis . Alternatively, one may specify the propagation vector, the phase, , and the polarization state, , where is the curve traced out by the electric field in a fixed plane. The most familiar polarization states are linear and circular, which are degenerate cases of the most general state, anellipse .One way to describe polarization is by giving the semi-major and semi-minor axes of the polarization ellipse, its orientation, and the sense of rotation (See the above figure). The Stokes parameters , , , and , provide an alternative description of the polarization state which is experimentally convenient because each parameter corresponds to a sum or difference of measurable intensities. The next figure shows examples of the Stokes parameters in degenerate states.
Definitions
The Stokes parameters are defined by
:
where the subscripts refer to three bases: the standard Cartesian basis (), a Cartesian basis rotated by 45° (), and a circular basis (). The circular basis is defined so that . The next figure shows how the signs of the Stokes parameters are determined by the helicity and the orientation of the semi-major axis of the polarization ellipse.
Representations in fixed bases
In a fixed () basis, the Stokes parameters are
:
while for , they are
:
and for , they are
:
Properties
For purely
monochromatic coherent radiation, one can show that:
whereas for the whole (non-coherent) beam radiation, the Stokes parameters are defined as averaged quantities, and the previous equation becomes an inequality: [H. C. van de Hulst "Light scattering by small particles", Dover Publications, New York, 1981, ISBN 0-486-64228-3, page 42]
:
However, we can define a total polarization intensity , so that
:
where is the total polarization fraction.
Let us define the complex intensity of linear polarization to be
:
Under a rotation of the polarization ellipse, it can be shown that and are invariant, but
:
With these properties, the Stokes parameters may be thought of as constituting three generalized intensities:
:
where is the total intensity, is the intensity of circular polarization, and is the intensity of linear polarization. The total intensity of polarization is , and the orientation and sense of rotation are given by
:
Since and , we have
:
Relation to the polarization ellipse
In terms of the parameters of the polarization ellipse, the Stokes parameters are
:
Inverting the previous equation gives
:
See also
*
Mueller calculus
*Jones calculus
*Polarization References
* E. Collett, "Field Guide to Polarization", SPIE Field Guides vol. FG05, SPIE (2005). ISBN 0-8194-5868-6.
* E. Hecht, "Optics", 2nd ed., Addison-Wesley (1987). ISBN 0-201-11609-X.
Wikimedia Foundation. 2010.