Software transactional memory

Software transactional memory

In computer science, software transactional memory (STM) is a concurrency control mechanism analogous to database transactions for controlling access to shared memory in concurrent computing. It is an alternative to lock-based synchronization. A transaction in this context is a piece of code that executes a series of reads and writes to shared memory. These reads and writes logically occur at a single instant in time; intermediate states are not visible to other (successful) transactions. The idea of providing hardware support for transactions originated in a 1986 paper and patent by Tom Knight.[1] The idea was popularized by Maurice Herlihy and J. Eliot B. Moss.[2] In 1995 Nir Shavit and Dan Touitou extended this idea to software-only transactional memory (STM).[3] STM has recently been the focus of intense research and support for practical implementations is growing.

Contents

Performance

Unlike the locking techniques used in most modern multithreaded applications, STM is very optimistic: a thread completes modifications to shared memory without regard for what other threads might be doing, recording every read and write that it is performing in a log. Instead of placing the onus on the writer to make sure it does not adversely affect other operations in progress, it is placed on the reader, who after completing an entire transaction verifies that other threads have not concurrently made changes to memory that it accessed in the past. This final operation, in which the changes of a transaction are validated and, if validation is successful, made permanent, is called a commit. A transaction may also abort at any time, causing all of its prior changes to be rolled back or undone. If a transaction cannot be committed due to conflicting changes, it is typically aborted and re-executed from the beginning until it succeeds.

The benefit of this optimistic approach is increased concurrency: no thread needs to wait for access to a resource, and different threads can safely and simultaneously modify disjoint parts of a data structure that would normally be protected under the same lock.

However, in practice STM systems also suffer a performance hit relative to fine-grained lock-based systems on small numbers of processors (1 to 4 depending on the application). This is due primarily to the overhead associated with maintaining the log and the time spent committing transactions. Even in this case performance is typically no worse than twice as slow.[4] Advocates of STM believe this penalty is justified by the conceptual benefits of STM.

Theoretically, the worst case space and time complexity of n concurrent transactions is O(n)[citation needed]. Actual needs depend on implementation details (one can make transactions fail early enough to avoid overhead), but there will also be cases, albeit rare, where lock-based algorithms have better time complexity than software transactional memory.

Conceptual advantages and disadvantages

In addition to their performance benefits, STM greatly simplifies conceptual understanding of multithreaded programs and helps make programs more maintainable by working in harmony with existing high-level abstractions such as objects and modules. Lock-based programming has a number of well-known problems that frequently arise in practice:

  • It requires thinking about overlapping operations and partial operations in distantly separated and seemingly unrelated sections of code, a task which is very difficult and error-prone.
  • It requires programmers to adopt a locking policy to prevent deadlock, livelock, and other failures to make progress. Such policies are often informally enforced and fallible, and when these issues arise they are insidiously difficult to reproduce and debug.
  • It can lead to priority inversion, a phenomenon where a high-priority thread is forced to wait on a low-priority thread holding exclusive access to a resource that it needs.

In contrast, the concept of a memory transaction is much simpler, because each transaction can be viewed in isolation as a single-threaded computation. Deadlock and livelock are either prevented entirely or handled by an external transaction manager; the programmer need hardly worry about it. Priority inversion can still be an issue, but high-priority transactions can abort conflicting lower priority transactions that have not already committed.

On the other hand, the need to abort failed transactions also places limitations on the behavior of transactions: they cannot perform any operation that cannot be undone, including most I/O. Such limitations are typically overcome in practice by creating buffers that queue up the irreversible operations and perform them at a later time outside of any transaction. In Haskell, this limitation is enforced at compile time by the type system.

Composable operations

In 2005, Tim Harris, Simon Marlow, Simon Peyton Jones, and Maurice Herlihy described an STM system built on Concurrent Haskell that enables arbitrary atomic operations to be composed into larger atomic operations, a useful concept impossible with lock-based programming. To quote the authors:

Perhaps the most fundamental objection [...] is that lock-based programs do not compose: correct fragments may fail when combined. For example, consider a hash table with thread-safe insert and delete operations. Now suppose that we want to delete one item A from table t1, and insert it into table t2; but the intermediate state (in which neither table contains the item) must not be visible to other threads. Unless the implementor of the hash table anticipates this need, there is simply no way to satisfy this requirement. [...] In short, operations that are individually correct (insert, delete) cannot be composed into larger correct operations.
—Tim Harris et al., "Composable Memory Transactions", Section 2: Background, pg.2

With STM, this problem is simple to solve: simply wrapping two operations in a transaction makes the combined operation atomic. The only sticking point is that it's unclear to the caller, who is unaware of the implementation details of the component methods, when they should attempt to re-execute the transaction if it fails. In response, the authors proposed a retry command which uses the transaction log generated by the failed transaction to determine which memory cells it read, and automatically retries the transaction when one of these cells is modified, based on the logic that the transaction will not behave differently until at least one such value is changed.

The authors also proposed a mechanism for composition of alternatives, the orElse function. It runs one transaction and, if that transaction does a retry, runs a second one. If both retry, it tries them both again as soon as a relevant change is made.[clarification needed] This facility, comparable to features such as the POSIX networking select() call, allows the caller to wait on any one of a number of events simultaneously. It also simplifies programming interfaces, for example by providing a simple mechanism to convert between blocking and nonblocking operations.

This scheme has been implemented in the Glasgow Haskell Compiler.

Proposed language support

The conceptual simplicity of STMs enables them to be exposed to the programmer using relatively simple language syntax. Tim Harris and Keir Fraser's "Language Support for Lightweight Transactions" proposed the idea of using the classical conditional critical region (CCR) to represent transactions. In its simplest form, this is just an "atomic block", a block of code which logically occurs at a single instant:

 // Insert a node into a doubly linked list atomically
 atomic {
     newNode->prev = node;
     newNode->next = node->next;
     node->next->prev = newNode;
     node->next = newNode;
 }

When the end of the block is reached, the transaction is committed if possible, or else aborted and retried. CCRs also permit a guard condition, which enables a transaction to wait until it has work to do:

 atomic (queueSize > 0) {
     remove item from queue and use it
 }

If the condition is not satisfied, the transaction manager will wait until another transaction has made a commit that affects the condition before retrying. This loose coupling between producers and consumers enhances modularity compared to explicit signaling between threads. "Composable Memory Transactions" took this a step farther with its retry command (discussed above), which can, at any time, abort the transaction and wait until some value previously read by the transaction is modified before retrying. For example:

 atomic {
     if (queueSize > 0) {
         remove item from queue and use it
     } else {
         retry
     }
 }

This ability to retry dynamically late in the transaction simplifies the programming model and opens up new possibilities.

One issue is how exceptions behave when they propagate outside of transactions. In "Composable Memory Transactions", the authors decided that this should abort the transaction, since exceptions normally indicate unexpected errors in Concurrent Haskell, but that the exception could retain information allocated by and read during the transaction for diagnostic purposes. They stress that other design decisions may be reasonable in other settings.

Transactional locking

STM can be implemented as a lock-free algorithm or it can use locking. There are two types of locking schemes: In encounter-time locking (Ennals, Saha, and Harris), memory writes are done by first temporarily acquiring a lock for a given location, writing the value directly, and logging it in the undo log. Commit-time locking locks memory locations only during the commit phase.

A commit-time scheme named "Transactional Locking II" implemented by Dice, Shalev, and Shavit uses a global version clock. Every transaction starts by reading the current value of the clock and storing it as the read-version. Then, on every read or write, the version of the particular memory location is compared to the read-version; and, if it's greater, the transaction is aborted. This guarantees that the code is executed on a consistent snapshot of memory. During commit, all write locations are locked, and version numbers of all read and write locations are re-checked. Finally, the global version clock is incremented, new write values from the log are written back to memory and stamped with the new clock version.

An increasingly utilized method to manage transactional conflicts in Transactional memory, and especially in STM, is Commitment ordering (also called Commit ordering; CO). It is utilized for achieving serializability[2] optimistically (i.e., without blocking upon conflict, and only locking for commit) by "commit order" (e.g., Ramadan et al. 2009,[5] and Zhang et al. 2006[6]). Serializability is the basis for the correctness of (concurrent transactions and) transactional memory. Tens of STM articles and patents utilizing "commit order" have already been published.

(Zhang et al. 2006[6]) is a US patent entitled "Software transaction commit order and conflict management" (which references CO US patent 5701480). Its abstract part is the following:

"Various technologies and techniques are disclosed for applying ordering to transactions in a software transactional memory system. A software transactional memory system is provided with a feature to allow a pre-determined commit order to be specified for a plurality of transactions. The pre-determined commit order is used at runtime to aid in determining an order in which to commit the transactions in the software transactional memory system. A contention management process is invoked when a conflict occurs between a first transaction and a second transaction. The pre-determined commit order is used in the contention management process to aid in determining whether the first transaction or the second transaction should win the conflict and be allowed to proceed."

With CO the desired serializability property is achieved by committing transactions only in chronological order that is compatible with the precedence order (as determined by chronological orders of operations in conflicts) of the respective transactions. To enforce CO some implementation of the Generic local CO algorithm needs to be utilized. The patent abstract quoted above describes a general implementation of the algorithm with a pre-determined commit order (this falls into the category of "CO generic algorithm with real-time constraints").

Implementation issues

One problem with implementing software transactional memory with optimistic reading is that it's possible for an incomplete transaction to read inconsistent state (that is, to read a mixture of old and new values written by another transaction). Such a transaction is doomed to abort if it ever tries to commit, so this does not violate the consistency condition enforced by the transactional system, but it's possible for this "temporary" inconsistent state to cause a transaction to trigger a fatal exceptional condition such as a segmentation fault or even enter an endless loop, as in the following contrived example from Figure 4 of "Language Support for Lightweight Transactions":

atomic {
    if (x != y)
        while (true) { }
}
atomic {
    x++;
    y++;
}
Transaction A
Transaction B

Provided x=y initially, neither transaction above alters this invariant, but it's possible transaction A will read x before transaction B updates it but read y after transaction B updates it, causing it to enter an infinite loop. The usual strategy for dealing with this is to intercept any fatal exceptions and abort any transaction that is not valid.

One way to deal with these issues is to detect transactions that execute illegal operations or fail to terminate and abort them cleanly; another approach is the transactional locking scheme.

Implementations

A number of STM implementations (on varying scales of quality and stability) have been released, many under liberal licenses. These include:

C/C++

  • TBoost.STM (formerly DracoSTM) A joint effort from CU-Boulder and the Boost Libraries Group to build an industrial strength C++ STM library primarily authored by Justin E. Gottschlich and Jeremy G. Siek.
  • TinySTM a time-based STM and Tanger to integrate STMs with C and C++ via LLVM.
  • The Lightweight Transaction Library (LibLTX), a C implementation by Robert Ennals focusing on efficiency and based on his papers "Software Transactional Memory Should Not Be Obstruction-Free" and "Cache Sensitive Software Transactional Memory".
  • LibCMT, an open-source implementation in C by Duilio Protti based on "Composable Memory Transactions". The implementation also includes a C# binding.
  • TARIFA is a prototype that brings the "atomic" keyword to C/C++ by instrumenting the assembler output of the compiler.
  • Intel STM Compiler Prototype Edition implements STM for C/C++ directly in a compiler (the Intel Compiler) for Linux or Windows producing 32 or 64 bit code for Intel or AMD processors. Implements atomic keyword as well as providing ways to decorate (declspec) function definitions to control/authorize use in atomic sections. A substantial implementation in a compiler with the stated purpose to enable large scale experimentation in any size C/C++ program.
  • stmmap An implementation of STM in C, based on shared memory mapping. It is for sharing memory between threads and/or processes (not just between threads within a process) with transactional semantics. The multi-threaded version of its memory allocator is in C++.
  • CTL An implementation of STM in C, based on TL2 but with many extensions and optimizations.
  • The TL2 lock-based STM from the Scalable Synchronization research group at Sun Microsystems Laboratories, as featured in the DISC 2006 article "Transactional Locking II".
  • Several implementations by Tim Harris & Keir Fraser, based on ideas from his papers "Language Support for Lightweight Transactions", "Practical Lock Freedom", and an upcoming unpublished work.
  • RSTM The University of Rochester STM written by a team of researchers led by Michael L. Scott.

C#

  • SXM, an implementation of transactions for C# by Microsoft Research. Documentation, Download page.
  • LibCMT, an open-source implementation in C by Duilio Protti based on "Composable Memory Transactions". The implementation also includes a C# binding.
  • NSTM, .NET Software Transactional Memory written entirely in C# offering truly nested transactions and even integrating with System.Transactions.
  • MikroKosmos A Verification-Oriented Model Implementation of an STM in C#.

Clojure

  • Clojure has STM support built into the core language

Common Lisp

  • CL-STM is a multi-platform STM implementation for Common Lisp.

Haskell

Java

  • SCAT research group's implementation of AtomJava.
  • JVSTM implements the concept of Versioned Boxes proposed by João Cachopo and António Rito Silva, members of the Software Engineering Group - INESC-ID
  • XSTM is an open source implementation for Java and .NET with an extensible architecture. It is implemented as a library, and provides extensions for change notification, persistence, and object replication.
  • Deuce A runtime environment for Java Software Transactional Memory using byte code manipulation.
  • Multiverse Is a Java 1.6+ based Software Transactional Memory (STM) implementation that uses Multi Version Concurrency Control (MVCC) as concurrency control mechanism.
  • DSTM2 Sun Lab's Dynamic Software Transactional Memory Library
  • ObjectFabric is a distributed STM.

OCaml

  • coThreads, a concurrent programming library of OCaml, offers STM (originally STMLib) as a module. Just like any other components in this library, the STM module can be used uniformly with VM-level threads, system threads and processes.

Perl

Python

Scala

  • scala-stm An implementation of a software transactional memory framework in Scala
  • ScalaSTM A draft proposal for an STM to be included in the Scala standard library
  • Akka STM the Akka framework contains support for STM in both Scala & Java

Smalltalk

  • GemStone/S [1] A Transactional Memory Object Server for Smalltalk.

other languages

Notes

  1. ^ Tom Knight. An architecture for mostly functional languages. Proceedings of the 1986 ACM conference on LISP and functional programming.
  2. ^ a b Maurice Herlihy and J. Eliot B. Moss. Transactional memory: architectural support for lock-free data structures. Proceedings of the 20th annual international symposium on Computer architecture (ISCA '93). Volume 21, Issue 2, May 1993.
  3. ^ Nir Shavit and Dan Touitou. Software transactional memory. Distributed Computing. Volume 10, Number 2. February 1997.
  4. ^ Simon Peyton-Jones. "Programming in the Age of Concurrency: Software Transactional Memory". Channel 9. http://channel9.msdn.com/ShowPost.aspx?PostID=231495. Retrieved 2007-06-09. 
  5. ^ Hany E. Ramadan, Indrajit Roy, Maurice Herlihy, Emmett Witchel (2009): "Committing conflicting transactions in an STM" Proceedings of the 14th ACM SIGPLAN symposium on Principles and practice of parallel programming (PPoPP '09), ISBN 978-1-60558-397-6
  6. ^ a b Lingli Zhang, Vinod K.Grover, Michael M. Magruder, David Detlefs, John Joseph Duffy, Goetz Graefe (2006): Software transaction commit order and conflict management United States Patent 7711678, Granted 05/04/2010.

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Transactional memory — attempts to simplify parallel programming by allowing a group of load and store instructions to execute in an atomic way. It is a concurrency control mechanism analogous to database transactions for controlling access to shared memory in… …   Wikipedia

  • Transactional Memory — Mit Transactional Memory bezeichnet man ein neues Hauptspeicherkonzept für parallele Berechnungseinheiten, welche auf gemeinsame Speicherbereiche zugreifen, wie z. B. Threads oder Mehrprozessorsysteme. Ziel ist es, die Schwierigkeiten der… …   Deutsch Wikipedia

  • SXM (transactional memory) — SXM is a software transactional memory system under development at Microsoft Research. The SXM API is exposed via managed code and is used to synchronize access to shared memory without using locks. It achieves mutual exclusion using database… …   Wikipedia

  • Socket (Software) — Ein Socket (abgel. von engl. Sockel oder Steckverbindung, Steckdose) ist ein Software Modul, mit dessen Hilfe sich ein Computerprogramm mit einem Rechnernetz verbinden und mit anderen Computern Daten austauschen kann. Sockets werden auch… …   Deutsch Wikipedia

  • Software quality — Contents 1 Motivation for Defining Software Quality 2 Definition 3 Alternative Approaches to Software Quality Defin …   Wikipedia

  • Sun Studio (software) — infobox software name = Sun Studio developer = Sun Microsystems latest release version = Sun Studio 12 latest release date = June 04, 2007 latest preview version = [http://developers.sun.com/sunstudio/downloads/express/index.jsp Sun Studio… …   Wikipedia

  • Collaborative software — (also referred to as groupware) is computer software designed to help people involved in a common task achieve goals. One of the earliest definitions of “collaborative software” is, intentional group processes plus software to support them.… …   Wikipedia

  • ACL (software) — Infobox Company company name = Audit Command Language company company type = Private foundation = 1987 location city = Vancouver, British Columbia location country = Canada Slogan: Data you can trust. Results you can see. key people = , President …   Wikipedia

  • Программная транзакционная память — Для улучшения этой статьи желательно?: Проверить качество перевода с иностранного языка. В компьютерных технологиях, программная транзакционная память ( …   Википедия

  • Commitment ordering — In concurrency control of databases, transaction processing (transaction management), and related applications, Commitment ordering (or Commit ordering; CO; (Raz 1990, 1992, 1994, 2009)) is a class of interoperable Serializability techniques …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”