- List of Renault engines
Engines used by French
automaker Renault SA have historically been referenced in technical specifications along two distinct systems:
* a purely numeric system used from the origins of the company until the mid-1980s
* an alphanumeric system in use since thenNumbering systems
Numeric
The numeric engine referencing system used until the mid-1980s was simply the chronological sequence of engine development projects. Thus, variants based on the same
engine block may have unrelated numbers.Alphanumeric
The system in use since the mid-1980s is of the format XnY-zzz where
* X is a letter specifying the engine family
* n is a one-digit code specifying the engine architecture as follows:
*# Petrol engine with single-barrelcarburetor and parallel valves (a layout often but not always associated with anoverhead valve design)
*# Petrol engine with double-barrelcarburetor and parallel valves
*# Petrol engine with single- or multi-pointfuel injection and parallel valves
*# Petrol engine with fourvalve s per cylinder
*# Petrol engine with single-barrelcarburetor and crossflow valve layout (includes also a direct petrol injection F engine)
*# Petrol engine with double-barrelcarburetor and crossflow valve layout
*# Petrol engine with multi-pointfuel injection with half-spherical combustion chambers and 4 valves per cylinder (includes also an early 16-valve version of the F-type engine)
*#Diesel engine withindirect injection (prechamber )
*#Diesel engine with direct injection
* Y is a one-letter indicator of displacement:
*:A: under 750cc
*:B-U: from 750 to 2250 cc in 50-cc, then 100-cc increments as displacement increases
*:V-Z: above 2250 cc in increments larger than 100cc
* zzz is a three-character alphanumeric code (usually starting with 7 or A) referring to key details of the variant's configuration (e.g., turbocharged, implemented in a specific vehicle, manual or automatic transmission,catalytic converter or not, etc. An odd number refers to an engine configured for automatic transmission, while an even number is meaning manual gearbox.)Engine families
A
The A engine was an all-aluminum
overhead valve inline 4 designed in the mid-1960s for theRenault 16 and produced in three variants:
* A1K: 1470cc
* A1L: 1565cc
* A2M/A3M: 1647ccB
The B family (for the "Billancourt" factory where it was produced, also referred to as the Ventoux engine)) was a cast-iron
overhead valve inline-4 designed in the mid-1940s for the 4CV and also used in theRenault 4 and Dauphine:
* 748cc (out of production before alphanumeric codes were introduced)
* 782cc (out of production before alphanumeric codes were introduced)
* B1B: 845ccC
The C family (for the "Cléon" factory where it was produced, also referred to as "Sierra" in early variants) was a major evolution of the B type, being also a cast-iron
overhead valve inline-4, designed in the early 1960s for theRenault 8 . An extremely sturdy, low-cost design, it was continuously refined over its 35-year career and was used in every supermini and compact Renault type up to and including the 1992 Twingo:
* C1C (689): 956cc (65x72); 32kW
* C1E (688): 1108cc (70x72); 28-34kW
* C1G: 1237cc (71,5x77); 40kW
* C3G: 1239cc (74x72); 40kW; monopoint injection
* 810: 1289cc (73x77; out of production before alphanumeric codes were introduced); 32-47kW
* C3J: 1390cc (75,8x77); 43kW; monopoint injection
* C1J/C2J (847): 1397cc (76x77); 43-52kW normal aspiration / 77-88kW Turbo
* C6J (840): 1397cc (76x77 with hemispherical head); 68kW normal aspiration, 79-116kW Turbo
* C7K: 1430cc (76x79)D
The D family is the successor to the smaller versions of Type C, introduced in the mid-1990s, and is a cast-iron
overhead camshaft inline-4 that powers theRenault Twingo :
* D4F: 1149cc
* D7F: 1149ccA 1000-cc D7D version was abandoned after early development.E
The E family (for "Energy") is the successor to the larger versions of Type C. It is a cast-iron
overhead camshaft inline-4 introduced on theRenault 19 in 1988 and widely used in theClio andMégane lineups:
* E5F/E7F: 1171cc
* E5J/E6J/E7J: 1390cc
* E7M/E4M: 1598ccF
The F inline-4 family (for "Fonte", French for cast iron) was the successor to the A family. Launched in 1981 on the
Renault 9 andRenault 11 , it has been the mainstay of Renault's engine lineup through the early 2000s in a succession of increasingly powerful petrol and Diesel variants inoverhead camshaft configurations. It was also Renault's first production four-valve design. It is being replaced by the M engine.
* F1N/F2N/F3N: 1721cc
* F7P: 1764cc
* F3P: 1794cc
* F4P: 1794cc (evolution of the F3P, 16V with variable valve control on the inlet camshaft)
* F3R/F4R/F7R: 1998cc
* F5R: 1998cc (direct fuel injection - IDE - only 2 years in production, used in the Megane Coupé and the Laguna II)
* F8Q/F9Q: 1896ccG
The G engine was designed in the late 1980s to be a modular family of
overhead camshaft inline 4- and 5-cylinder petrol and Diesel engines. A G7R petrol and a G8T Diesel variant were in development when Renault announced a merger withVolvo who was designing its own modular family along the exact same lines. The group made the business decision to cancel all G development save for Diesel versions. Despite the breakdown of the merger in 1993, Renault used Volvo petrol engines (Type N) in its mid- and full-size models until the early 2000s
* G8T/G9T: 2188ccJ
The J family (also referred to as the
Douvrin engine ) was an all-aluminumoverhead camshaft inline-4overhead camshaft design jointly developed with PSA. Introduced in 1977, it was phased out in 1996 by the F series.
* J5R/J6R/J7R: 1995cc
* J6T/J7T: 2165cc
* J8S: 2068ccK
The K type is a major evolution of the E type.
* K4J: 1390cc
* K4M: 1598cc
* K7M: 1598cc
* K9K: 1461ccL
The L type is an aluminum
overhead camshaft petrol V6 developed jointly with PSA, who refer to it as the ES engine:Renault used this engine first in the Laguna in 1997, shortly after it became available in the Safrane, and the Espace rated 194 bhp. Engines after 2001 got a new injection system and variable valve timing, this variant is rated 208 bhp, was being used in the Avantime, and the Laguna II V6.The engine was also used in the Clio V6, rated 230 bhp in the phase 1 vehicles, and 255 bhp after the facelift.
* L7X: 2946cc
M
The M engine is an
overhead camshaft engine developed jointly withNissan , who refers to it as the MR engine. Only one Diesel version is in use at Renault as of mid-2006, though the petrol versions already launched by Nissan will almost certainly be used as well
* M9R: 1995cc
* M4R: 1997cc (petrol engine used on Renault Clio III; launched November 2006)N
The N engine is Renault's internal designation for the modular
overhead camshaft inline-4 and inline-5 sourced fromVolvo in the 1990s and used on the Laguna and Safrane sedans:
* N7Q: 1948cc
* N7U: 2435ccP
The P engine is an
overhead camshaft Diesel V6 sourced from Isuzu and used in the Vel Satis sedan and Espace minivan:
* P9X: 2958ccThe S engine was a cast-iron
overhead valve inline-4 Diesel engine sourced from Italian engine manufacturer SOFIM. It has been used in the Trafic and Master utility van and the Safrane sedan since 1981:
* S8U/S9U: 2445cc
* S9W: 2799ccV
The V engine is Renault's internal designation for the
Nissan VQ engine , anoverhead camshaft V6 used in the Vel Satis sedan and Espace minivan
* V4Y: 3498ccX
The X engine (referred to as XY by PSA) was an all-aluminum
overhead camshaft inline-4 jointly developed with PSA. Introduced in 1974, it powered the ill-fatedRenault 14 midsize car and was phased out in 1982 by evolutions of the C series:
* X1G: 1219cc
* X2J: 1360ccZ
The Z engine, also known as the
PRV engine , was an aluminiumoverhead camshaft V6 developed jointly with PSA andVolvo in the early 1970s. Introduced in 1975 on theRenault 30 , it also powered the 25, Safrane, Laguna, Espace, and Alpine.
* Z7U: 2458cc
* Z7V: 2664cc
* Z6W/Z7W: 2849cc
* Z7X: 2975, then 2963cc
Wikimedia Foundation. 2010.