Off-Air Pickup

Off-Air Pickup

An Off-Air Pickup was a method used by some small market television stations in the United States to receive and relay network programming.

In the 1950s, a network of AT&T coaxial cable and microwave relays known as Long Lines was constructed. These circuits could be (and were) used for normal telephone traffic, but were also utilized to relay the video signals of the three U.S. commercial television networks (ABC, CBS, and NBC) to their various affiliated stations around the country. This enabled those affiliates to all carry network programming "live" at the same time.

There were, however, a handful of small-market TV stations that were not able to be connected via Long Lines due to their remote geographic location. In some cases, network shows were recorded (either as a kinescope or, starting in the late 1950s and early 1960s, on videotape) and sent to the station via mail or courier, to be aired on a delayed basis (usually a one-week delay). This was a less than satisfactory situation for these stations because of the inferior quality of kinescope recordings, the possibility of a recording being lost or damaged in transit, and the fact that they would be unable to broadcast episodes of a given series on the same date and at the same time as most other network affiliates. Additionally, live broadcasts such as sporting events and breaking news coverage could not be carried, as they would be dated by the time a recording could be received and broadcast.

Some of these stations, therefore, entered into an agreement with another affiliate of the same network located in a nearby market to pick up their broadcast signal off the air and relay it via their own transmitter during network programming. In most cases, this was accomplished by simply placing a high-gain directional antenna on their broadcast tower, aimed at the relaying station. (Although, in a few situations, a private microwave relay system was established).

While avoiding the problems of depending on delayed recordings, this method was not without its own inherent pitfalls. As the originating station was usually somewhat distant (as far as 50–100 miles or more), the signal could frequently be degraded or interfered with by other stations on the same channel during periods of ionospheric or tropospheric disturbance. For that matter, if the originating station experienced technical difficulties and had to leave the air, the receiving station would be left without network programming during the outage as well.

Additionally, during network breaks when local commercials and station identifications were aired, the receiving station would have to cut away from their off-air network feed to substitute their own local material. This was often accomplished without cues, merely by having the Master Control operator monitor the feed, prepared to "punch up" the local inserts when appropriate. But this required very careful timing, and often a bit of the originating station's commercials or station identification would mistakenly be rebroadcast by the receiving station. Also, if there was a local pre-emption either due to breaking news or a pre-planned pre-emption of the network on the originating station, the other station would have to scramble to find alternate programming to carry during the pre-emption, either by asking the network for film of a program in advance, picking it up from yet another station, or substituting programming from their archives.

Although most of these affiliates were eventually connected to the "live" network via new extensions or branches of the Long Lines system, some of these off-air network pickups were still used well into the 1970s. Eventually, during the 1980s, the U.S. networks began distributing their programming via satellite, enabling any affiliate to erect a dish and have a reliable source for their network feed.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Off-World Interceptor — Developer(s) Crystal Dynamics Publisher(s) Crystal Dynamics Platform(s) …   Wikipedia

  • Air suspension — is a type of vehicle suspension powered by an engine driven or electric air pump or compressor. This pump pressurizes the air, using compressed air as a spring. Air suspension replaces conventional steel springs. If the engine is left off for an… …   Wikipedia

  • Air pressurized water — extinguishers or APW are types of fire extinguishers that extinguish burning material by absorbing heat . They contain 2.5 gallons of water or water with a wetting agent which is applied by means of a 1/2 inch hose with a smooth bore nozzle… …   Wikipedia

  • Off-roading — A Land Rover Defender 90 off roading Off roading is a term for driving a vehicle on unsurfaced roads or tracks, made of materials such as sand, gravel, riverbeds, mud, snow, rocks, and other natural terrain. Contents 1 …   Wikipedia

  • Off-road vehicle — ORV redirects here. For the Austrian cycling governing body, see Österreichischer Radsport Verband. Mercedes Benz Unimog in the Dunes of Erg Chebbi in Morocco. Note the high ground clearance due to Portal gear axles An off road vehicle is… …   Wikipedia

  • Fulton surface-to-air recovery system — The Fulton surface to air recovery system (STARS) is a system used by the United States Air Force and United States Navy for retrieving persons on the ground from a MC 130E Combat Talon I aircraft. It involves using an overall type harness and a… …   Wikipedia

  • Hot air ballooning — is the activity of flying hot air balloons. Attractive aspects of ballooning include the exceptional quiet (except when the propane burners are firing), the lack of a feeling of movement, and the bird s eye view. Since the balloon moves with the… …   Wikipedia

  • Independence Air — Infobox Airline airline=Independence Air logo=Independence Air logo.svg logo size=235 fleet size=85 destinations=37 IATA=DH ICAO=IDE callsign=Independence parent=FLYi, Inc. founded=1989 (as Atlantic Coast Airlines) ceased=2006 headquarters=Dulles …   Wikipedia

  • Compressed air foam system — A fire engine using CAFS to make foam on the ground A compressed air foam system (CAFS) is a system used in firefighting to deliver fire retardant foam for the purpose of extinguishing a fire or protecting unburned areas from becoming involved in …   Wikipedia

  • Compressed Air Foam System — A Compressed Air Foam System for hand hose, abbreviated CAFS, is a system used in firefighting to deliver fire retardant foam for the purpose of extinguishing a fire or protecting unburned areas from becoming involved in flame.DescriptionRon… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”