Norfolk and Western 611

Infobox Locomotive
name=Norfolk & Western #611

---

caption=Norfolk and Western #611
powertype=Steam
gauge=4 ft 8½ in (1435 mm)
builder=Roanoke Shops
builddate=May 1950
serialnumber = 388
railroad=Norfolk and Western Railway
whytetype=4-8-4
firearea=107.5 ft² (9.98 m²)
cylindersize=27 in bore × 32 in stroke
(686 mm × 813 mm)
driversize=70 in (1.778 m) diameter
uicclass=2'D2'h
currentowner=The City of Roanoke, leased to the Virginia Museum of Transportation
retiredate=1959 (revenue)
1994 (excursion)
disposition=Static display in Roanoke, Virginia
roadnumber=611
fueltype=Coal
valvegear=Baker
railroadclass=J
numinclass=12 of 14

Norfolk and Western 611 is a 4-8-4 steam locomotive built by the Norfolk and Western Railway's East End Shops in Roanoke, Virginia, in May 1950 for the Norfolk and Western Railway. 611 is one of a class of 14 "J"s built by the Roanoke shops. The first batch, numbered 600 to 604, were built in 1941-42 and were delivered streamlined. In 1943, 605-610 were delivered without shrouding and lightweight side rods, due to the limitations on the use of certain materials during the war; due to these distinctions, they were classified "J-1". But, when N&W showed the War Production Board the reduced availability numbers because of this, the Board allowed the J-1s to be re-fitted as Js with the lightweight rods and shrouding in 1944. The last batch, 611-613, were built in 1950, all streamlined. The Js were built and designed completely by N&W employees, something that was uncommon on American railroads. The total cost for building 611 was $251,544 in 1950; now it would likely be over $2 million.Fact|date=August 2008 For comparison, the 'Tornado project', a charity in Britain building from scratch a replica Pacific steam locomotive will have spent around £4 million ($8 million) by the time 'Tornado' is finished in mid-2008.

Design

The design of the Js was completely universal. They were equipped with 300 psi boilers, 70" drivers, and roller bearings on all wheels and rods. The 70" drivers and 300 psi boiler allowed for a higher tractive effort. When operating at maximum psi, the Js delivered 80,000 lbf of tractive effort-the most powerful for 4-8-4 wheel arrangement locomotive without a booster. The engineers designed the J class not to pull freight, but passengers, and at a high speed. The 70" drivers were very small for a locomotive that was to pull trains at over 100 mph. To overcome this, the wheelbase was made extremely rigid, lightweight rods were used, and the counterbalancing was extremely good. The negative effect of this was that it made the locomotives very picky about good trackwork.

ervice history

The Js were the pride of the N&W, pulling passenger trains such as "The Powhatan Arrow", "Pocahontas", and "Cavalier", as well as ferrying Southern Railway's "Tennessean" between Monroe, Virginia and Bristol, Tennessee. While on test on the Pennsylvania Railroad, number 610 proved that a J could pull ten cars at 110 mph along a section of flat, straight track. Despite the power and speed capabilities the Js were among the most reliable engines, running as many as 15,000 miles per month, even on the mountainous and relatively short route of the N&W. It wasn't all glamour though. On January 23, 1956, 611 derailed along the Tug River near Cedar, West Virginia while pulling the "Pocahontas". It was determined that the engineer ran the engine at an excessive speed around a curve and its high center of gravity caused it to flip on its side. Within a year, 611 was repaired and back up pulling the varnish.

In the late fifties, N&W began purchasing first generation diesels, experimenting with fuel and maintenance cost. They leased several sets of EMD E-6s, E-7s, E-8s from the Atlantic Coast Line and Richmond, Fredericksburg and Potomac Railroads. The diesels proved to be cheaper in maintenance and fuel cost, but several were required to equal the power of a steam locomotive. In the end, diesel prevailed, and the clock began to tick until steam was retired. In 1958 and 1959, the railroad ran several farewell to steam excursions, with 611 pulling the last one in October 1959. While many of the locomotives went to the scrap lines, 611 was more fortunate, in part due to her superb condition after 1956 derailment and subsequent repair, and also in no small part to the efforts of O. Winston Link, the famous photographer, whose offer to purchase 611 himself, rather than see her scrapped, practically embarrassed N&W into donating her for posterity.

Preservation efforts

Due to the efforts of several men, including Link, 611 was saved. In 1960, the locomotive was donated to the Virginia Museum of Transportation in Roanoke, where it sat dormant for two decades.In the early 1980s, Robert Claytor, president of Norfolk and Western in its last months, had his eye on 611. His brother, W. Graham Claytor, once president of the Southern Railway, was in charge of Southern Railway's Steam Program. This program had been around since 1966 with Southern Railway 2-8-2 4501, sending steaming ambassadors system wide. Robert envisioned something similar for the N&W with steam. He made a lease with the museum, and in 1981, 611 was sent to Southern Railway's Norris Yard Steam Shop in Birmingham, Alabama for an overhaul. In 1982, 611 emerged under steam, with the only change being a dual beam headlight instead of the single bulb lamp it carried in the fifties. That wasn't the only change that affected 611 during the rebuild. Norfolk and Western and Southern Railway merged into Norfolk Southern. This now doubled the amount of track available for 611 to tour. 611's first trip was a ferry move up the Southern into Lynchburg, Virginia, and then over N&W home rails to Roanoke for a ceremony. In 1984 the American Society of Mechanical Engineers named 611 a National Historic Mechanical Engineering Landmark and it has since been added to the National Park Service's Historic American Engineering Record. For the next twelve years, 611 remained the pride of the NS system.

On Sunday, May 18, 1986, tragedy struck once again. 611 was at the head of an Employee Appreciation train from Norfolk, VA, with Robert Claytor at the throttle. One of the passenger cars picked a switch on the main through the Great Dismal Swamp, causing it and 12 other cars of the 23 car train to derail. Many of the nearly 1000 employees and their family members were injured, some of the more seriously injured had to be airlifted to hospitals in nearby Norfolk for treatment. In addition, the derailment prevented the use of the main line for freight traffic for some time. Had this been a public excursion instead of a railroad employee event it could have easily spelled the end of the NS steam program, regardless, this derailment brought a wave of change to the program, including the retirement of many of the older passenger cars. Despite rumors, the program chugged on, welcoming another locomotive, former Norfolk & Western 1218, a simple articulated 2-6-6-4. The two continued to pull the systems' trains until 1994, when another disastrous blow hit. In September 1994, there was a switching accident in Lynchburg, VA, involving the passenger cars of an excursion consist 611 was to pull the next day. This damaged several cars, causing a shortage, and the need for more cars. Only a month later, the news many had expected after the Great Dismal Swamp derailment was released. The executives of NS determined to terminate the steam program, due to rising insurance costs, increasing cost of maintenance, and a high system capacity. The last steam excursion was on December 3 from Birmingham, Alabama to Chattanooga, Tennessee and back, pulled by 611. The next day 611 set off on a three-day trek home to Roanoke. 611's last official day of being under steam was December 7, 1994, the 53rd anniversary of Pearl Harbor Day. Between Salisbury, North Carolina and Roanoke, 611 displayed black flags on the run. That evening, upon arrival at Schaffers Crossing in Roanoke, its fire was dumped for the last time.

In 1995, 611 was put back in the museum, now known as the Virginia Museum of Transportation, under a new train shed. In 2003, a major renovation of the railyard brought a bigger train shed (The Robert B. Claytor and W. Graham Claytor Jr. Pavilion), and 611 was joined by twice former stable mate, 1218. Both locomotives sit at the museum today, along with many other regional railroad equipment. 611 remains in excellent condition. The 611 shows some signs of weathering, including a small crack in her bullet nose. If the locomotive is to run again, 611 will need new flues and upgrades to the new FRA Form 4.

As one of the last, most prominent, and most distinctive locomotives assembled in Roanoke, the 611 often serves as a symbol for Roanoke and its railroad history. The 611 is also depicted on the Commonwealth of Virginia's "Railway Heritage" license plate.

See also

* [http://www.vmt.org/Collections/nw611.htm Virginia Museum of Transportation]
* [http://www.asme.org/Communities/History/Landmarks/Norfolk_Western_611_Class_J.cfm ASME National Historic Mechanical Engineering Landmark #94 - N&W #611]
* [http://lcweb2.loc.gov/cgi-bin/query/S?pp/hh:@FIELD(ALTTITLE+@od1(+norfolk+&+western+steam+locomotive+no++611+)) 611's Historic American Engineering Record Page]