Air flow meter

Air flow meter

Contents

An air flow meter, is a device that measures how much air is flowing through a tube. It does not measure the volume of the air passing through the tube, it measures the actual speed of the air flowing through the device in a defined time segment. Thus air flow meters are simply an application of mass flow meters for a special medium. Typically, mass air flow measurements are expressed in the units of kilograms per sec (kg/s).

Types of air flow meters

In automobiles

An air flow meter is used in some automobiles to measure the quantity of air going into the internal combustion engine. All modern electronically controlled diesel engines use air flow meter,[citation needed] as it is the only possible means of determining the air intake for them. In the case of a petrol engine, the electronic control unit (ECU) then calculates how much fuel is needed to inject into the cylinder ports. In the diesel engine, the ECU meters the fuel through the injectors into the engines cylinders during the compression stroke.

The vane (flap) type air flow meters (Bosch L-Jetronic and early Motronic EFI systems or Hitachi) actually measure air volume, whereas the later "hot wire" and "hot film" air mass meters measure speed of air flow.

The flap type meter includes a spring which returns the internal flap to the initial position. Sometimes if the spring is tensioned too tight, it can cause restrict the incoming air and it would cause the intake air speed to increase when not opened fully.

Differential pressure is also used for air flow measurement purposes.

Failures

Air flow meters may fail or wear out. When this happens, engine performance will often decrease significantly, engine emissions will be greatly increased, and usually the Malfunction Indicator Lamp (MIL) will illuminate. In most countries in Europe, and in places in the United States where emissions inspections are obligatory, a lit MIL is cause for a vehicle to fail the inspection. Some engines do not idle with an air flow meter failure.

Air flow meter for R&D of cars

In the development process of internal combustion engines with engine test stands, an air flow meter/air flow measuring unit is used for measuring the continuous gravimetric air consumption of combustion engines.

See also

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • air flow meter — A meter which measures the rate at which air enters the engine. In Bosch systems, any device that measures the amount of air being used by the engine. The control unit uses this information to determine the load on the engine. The two most common …   Dictionary of automotive terms

  • Air flow bench — An air flow bench is a device used for testing the internal aerodynamic qualities of an engine component and is related to the more familiar wind tunnel. Used primarily for testing the intake and exhaust ports of cylinder heads of internal… …   Wikipedia

  • L-Jetronic air flow meter — Airflow meter used on the L Jetronic system …   Dictionary of automotive terms

  • vane air-flow meter — (VAF) a sensor with a moveable vane connected to a potentiometer calibrated to cause the amount of air flowing to the engine …   Dictionary of automotive terms

  • Ultrasonic flow meter — A ultrasonic flow meter measures the velocity of a liquid or gas through a pipe using acoustic sensors. This has some advantages over other measurement techniques. The results are slightly affected by temperature, density or conductivity.… …   Wikipedia

  • Peak-flow meter — This hand held device measures air flow (how fast air is blown out of the lungs). Patients can use peak flow meters to measure their own air flow regularly. The use of a peak flow meter allows patients to obtain a much earlier indication of an… …   Medical dictionary

  • peak flow meter — pēk flō n a device that measures the maximum rate of air flow out of the lungs during forced expiration and that is used esp. for monitoring lung capacity of individuals with asthma (as to indicate bronchial narrowing) called also peak expiratory …   Medical dictionary

  • peak flow meter — noun Date: 1962 a device that measures the maximum rate of air flow out of the lungs during forced expiration and that is used especially for monitoring lung capacity of asthmatics …   New Collegiate Dictionary

  • Flow measurement — is the quantification of bulk fluid movement. Flow can be measured in a variety of ways. Positive displacement flow meters acumulate a fixed volume of fluid and then count the number of times the volume is filled to measure flow. Other flow… …   Wikipedia

  • peak flow meter — noun An instrument that monitors the peak expiratory flow rate of air from a persons bronchi; used to manage asthma …   Wiktionary

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”