Channel noise level

Channel noise level

In telecommunications, the term channel noise level has the following meanings:

  1. The ratio of the channel noise at any point in a transmission system to an arbitrary level chosen as a reference.[1][2]
  2. The noise power spectral density in the frequency range of interest.[citation needed]
  3. The average noise power in the frequency range of interest.[citation needed]

Notes

  1. ^ The channel noise level may be expressed in (a) dB above reference noise (dBrn), (b) dB above reference noise with C-message weighting (dBrnC), or (c) adjusted dB (dBa).
  2. ^ Each unit used to measure channel noise level reflects a circuit noise reading of a specialized instrument designed to account for different interference effects that occur under specified conditions.

 This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Noise measurement — is carried out in various fields. In acoustics, it can be for the purpose of measuring environmental noise, or part of a test procedure using white noise, or some other specialised form of test signal. In electronics it relates to the sensitivity …   Wikipedia

  • Noise shaping — is a technique typically used in digital audio, image, and video processing, usually in combination with dithering, as part of the process of quantization or bit depth reduction of a digital signal. Its purpose is to increase the apparent signal… …   Wikipedia

  • Noise (audio) — Noise in audio, recording, and broadcast systems refers to the residual low level sound (usually hiss and hum) that is heard in quiet periods of a programme. In audio engineering, it can refer either to the acoustic noise from loudspeakers, or to …   Wikipedia

  • Noise figure — (NF) is a measure of degradation of the signal to noise ratio (SNR), caused by components in a radio frequency (RF) signal chain. The noise figure is defined as the ratio of the output noise power of a device to the portion thereof attributable… …   Wikipedia

  • Noise temperature — In electronics, noise temperature is one way of expressing the level of available noise power introduced by a component or source. The power spectral density of the noise is expressed in terms of the temperature (in kelvins) that would produce… …   Wikipedia

  • Noise (electronics) — Electronic noise [1] is a random fluctuation in an electrical signal, a characteristic of all electronic circuits. Noise generated by electronic devices varies greatly, as it can be produced by several different effects. Thermal noise is… …   Wikipedia

  • Noise (video) — For other uses, see Noise (disambiguation). On an empty channel, an analog TV receiver shows a snowy noise pattern. A similar pattern is shown if on a digital channel when not using a DTV converter box …   Wikipedia

  • Noise (radio) — In radio reception, noise is the superposition of white noise (also called static ) and other disturbing influences on the signal, caused either by thermal noise and other electronic noise from receiver input circuits or by interference from… …   Wikipedia

  • Noise — This article is about noise as an unwanted phenomenon. For other uses, see Noise (disambiguation). NASA researchers at Glenn Research Center conducting tests on aircraft engine noise in 1967 In common use, the word noise means any unwanted …   Wikipedia

  • Noise reduction — For sound proofing, see soundproofing. For scientific aspects of noise reduction of machinery and products, see noise control. Noise reduction is the process of removing noise from a signal. All recording devices, both analogue or digital, have… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”