Hubless wheel

A hubless wheel (also known as a rim-rider or centerless wheel) is a type of wheel with no center hub. To be precise, however, the hub is actually almost as big as the wheel itself. The axle is hollow, following the wheel at very close tolerances. The hubless wheel was invented by Franco Sbarro (who has built a variety of working hubless wheel vehicles, including at least two motorcycles and a car, the 1989 Sbarro Osmos), and patented by Globeholding of Geneva. The wheel has yet to reach its full technical potential.^{[citation needed]} Tolerances, transfer of energy, and materials are elements of the design which are yet to be fully exploited.^{[citation needed]}

Although hubless wheels are striking in appearance, their numerous practical disadvantages have precluded their widespread use as an alternative to conventional wheels. They are difficult and expensive to manufacture, requiring a great deal of precision machining, and the design leaves the bearings and other mechanical parts largely exposed to the elements. The drive system is especially problematic since a conventional axle and CV joint cannot be used; options include using chain or belt drive. Another solution, developed by Sbarro, is to house the entire propulsion system inside the wheel itself.

A great example of a hubless wheel are those used in a 2011 "made to order" Tron Legacy Light Cycle. The illuminated, street-legal motorcycle was made by Hammacher Schlemmer, inspired by the computer animated cycle from the 2010 film "Tron: Legacy." Designed for casual cruising and slow ride-bys at shows, it is made from a steel frame covered by a fiberglass cowling that replicates the sleek look of its computer-generated imagery counterpart. Electroluminescent strips built into the tire cowlings, wheel rims, and body illuminate the cycle. It is powered by a fuel-injected Suzuki 996cc, 4-stroke engine. Riders lay at a near-horizontal position astride the padded leather seat, with feet on foot pegs that control its 6-speed constant mesh manual transmission and hands on the handlebars for throttle and braking. The hubless wheels are former truck tires built up then custom-shaped to fit onto one of two counter-rotating rims spinning within each other, providing the broad-tired authenticity of the computer cycles from the movie.

Another example of a hubless vehicle is the "Zero Bike", a lightweight hubless bicycle whose non working prototype won an Industrial Design Excellence Award in 1991.^[1] Its design is based on the principle of magnetic superconductivity, also used in high-speed trains that are suspended above rails.

The orbital wheel was designed in 1990 by Dominique Mottas of the French Osmos company in an attempt to reduce the number of moving parts by removing the center shaft and hub of the wheel and relying upon a circular rim inserted inside the wheel to support it instead. The orbital wheel was created by using two circular bearings inserted inside of each other. The inner bearing provides steering, support, and attachment to the frame. The outer bearing consists of a tire with a brake ring also fixed in. Some of the advantages seen by this design are more accurate steering, less weight, and enhanced braking.

See also

• Monocycle
• Direct drive mechanism

References

1. ^ "A Bicycle Far Ahead Of the Pack", New York Times, 29 August 1991

External links

• [1]
• Gallery of motorcycles with hubless wheels