- Sound card mixer
A sound card mixer is the analog part of a
sound card that routes and mixes sound signals. This circuit receives inputs from both external connectors and the sound card'sdigital-to-analog converter s. It selects or mutes, amplifies (with variablegain ) these signals, adds then together, and finally routes the result to both external output connectors and the sound card'sanalog-to-digital converter s. Different mixing schemes are in use, but the ones implemented in most IBM-PC compatible computers today are variants of a scheme defined in Intel'sAC '97 Audio Component Specification. [http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf AC'97 Component Specification] , Revision 2.3, Intel Corporation, April 2002. Figure 17: AC ’97 mixer functional diagram (section 5.5, page 43)]Mixer controls
Sound card mixer controls are provided through the GUI interface in the computer's
operating system . On mostdesktop environments , the mixer can be accessed via a Volume icon in thesystem tray .Mixer controls are similar to that of a
mixing console . They consist of volume sliders representing each individual source, accompanied by balance and mute controls. Most interfaces provide a method of switching between playback (output) sources and recording (input) sources. Additional hardware or software may add other effects such aslow-pass filter s anddistortion .Mixing scheme
The following schematic shows how a greatly simplified example of how some sound card's mixers manipulate sound from different sources:
A more accurate depiction of the mixing scheme used in AC'97 compatible sound cards can be seen in [http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf Figure 17 of the AC'97 spec] .
Typical input channels and controls
Each of the following signal sources has its own gain and mute control in a typical mixer scheme:
Control channels Controlled source Wave / PCM stereo Audio signal generated by the CPU via the sound card's digital-to-analog converter. (This includes audio produced by games, MP3 orWAV players, but also some software playing aCD-DA through the CPU, such as,Windows Media Player orMedia Player Classic , as well as TV tuner cards that use the CPU for decoding audio.)MIDI/SW Synth stereo Audio signal generated by a synthesizer chip (often described as “MIDI device”) or digital signal processor on the soundcard. CD playback stereo Audio signal received from the analog CD input of the mixer, which is usually connected to the analog audio output of a CD drive. Microphone mono Audio signal received through one of the (typically two: MIC1 and MIC2, switchable) analog microphone inputs. MIC1 is typically connected to the external microphone jack (colored "pink" under PC99 ). An optional 20decibel (10× voltage) amplifier can be activated for this input in most mixers.Line in stereo Audio signal received through the LINE input of the mixer, usually connected to an external jack (colored "light blue" in PC99 ), which can be used to connect a HiFi amplifier, tuner,iPod ,television , etc.Aux in stereo Audio signal received through the AUX input of the mixer. This mixer input is not used by all PCs. PC speaker mono Some soundcards provide an input for the (very crude) audio signal that the Programmable Interval Timer of an IBM PC generates for thePC speaker .SPDIF mono Digital interface, uncommon in the PC world Typical output channels and controls
Each of the following signal destinations has its own gain and mute control in a typical mixer scheme:
Control channels Controlled source Line out stereo Audio signal provided to the LINE OUT jack of a sound card (colored "lime green" in PC99 ). This can be connected to headphones or a HiFi amplifier, etc.Aux out stereo Audio signal provided to the AUX OUT connection of the mixer. Not all sound cards provide this mixer channel on an external connector. Mono out / PC speaker mono Audio signal provided to the MONO connection of the mixer. Some PCs connect this signal to an internal PC speaker .SPDIF mono Digital interface, uncommon in the PC world Typical record controls
In a typical AC’97 style mixer scheme, the
analog-to-digital converter s that allow the CPU to receive audio signal can either be connected directly to one of each of the inputs, or they can be connected to the same summation result that the mixer can provide via the line, aux and mono analog outputs. Therefore, in addition to the above input and output gain controls, a mixer also provides a number of controls for selecting the recording source. The result of this selection is again subject to a mute and gain control before it is digitized.Some tips
- Convert MIDI into WAV: Play a MIDI file with "SW synth" or "Wave" (depending on the playing software) controls at high volume. In "record control" select "mono mix" or "stereo mix" (depends of whether you want a mono or stereo output). The sound can be recorded using any recording software like
Windows Sound Recorder .
In order to avoid interference, all other controls in "play control" should be muted. If you want to hear the sound while being recorded, care should be taken to avoid feedback, either by lowering speaker volume or repositioning the microphone. - Record streaming sound (i.e. sound from an internet-radio station): As this sound is controlled through "wave" control, you have to set this volume in the "play control" (maybe it's convenient to mute all others, except "volume control" if you want to hear it meanwhile)In "record play" select "stereo mix" or "mono mix".
In this way you can also record any other internal sound of your PC, i.e. voices of TTS engines, sounds of the operating system, ... - A sound coupling can be easily produced by setting "microphone" and "volume control" controls to high volume, especially if the "microphone's" "mic boost" setting is turned on.
References
- Convert MIDI into WAV: Play a MIDI file with "SW synth" or "Wave" (depending on the playing software) controls at high volume. In "record control" select "mono mix" or "stereo mix" (depends of whether you want a mono or stereo output). The sound can be recorded using any recording software like
Wikimedia Foundation. 2010.