Combat knife

Combat knife
USMC "KA-BAR" Combat Knife

A combat knife is a fighting knife designed solely for military use and primarily intended for hand-to-hand or close combat fighting.[1]

Since the end of trench warfare, most military combat knives have been secondarily designed for utility use (clearing foliage, chopping branches for cover, opening ammunition crates, etc.) in addition to their original role as close-quarter combat weapons.[2][3] On the other hand, military knives that are intended primarily for use in a role other than combat are typically referred to by their primary role, such as "utility knife" or "survival knife".



Daggers designed for military usage in close combat engagements have been carried by soldiers for thousands of years. The adoption of combat daggers made of iron was a significant milestone in combat knife development, and such weapons were highly prized in the ancient armies of the Middle East.[4] French and Italian military daggers of the 14th century were the first to introduce the acutely-tapered, sharply-pointed and double-edged blade as a response to improvements made in armor design and the need to exploit weaknesses in armor protection.[5] The English and Scandinavians introduced a combat knife known as the "bollock dagger" into military service around 1350[5], while the French poignard and the Scottish dirk were daggers designed from the outset as military weapons.

The rise in use of firearms led to a decline in the use of combat daggers and knives as military-issue weapons. However, privately purchased knives were often carried by foot soldiers for use both as auxiliary weapons and as utility tools. Some military forces issued knives for individual campaigns or for specialist troops such as pioneer or field engineer detachments, but these cutting tools were not primarily designed for use as combat knives.

Modern combat knives

Soviet NR 43 Combat Knife

Modern combat knives come in many shapes and sizes, though they all share the common characteristic of being purposely designed for military use and a primary role as a close-quarters combat weapon. The majority of military forces today have largely standardized the types of combat knife issued to soldiers. The Chilean Commando forces, for instance, are trained in the use of the Corvo, a traditional Chilean military weapon. The Gurkha regiments favor the Kukri, a broad-bladed, curved general-purpose cutting tool and weapon that more closely resembles a machete or Filipino Bolo than a knife. In the United States Marine Corps, the standard issue combat knife since World War II has been the USMC Fighting Utility knife.[2]

World War II

During World War II, one of the most famous fighting knives designed specifically for military use in combat was the British Fairbairn-Sykes fighting knife. It was designed by William E. Fairbairn and Eric A. Sykes, two renowned former members of the Shanghai Municipal Police who trained countless soldiers in the art of close-quarters fighting.[2] The Fairbairn-Sykes knife inspired several similar knives of the era such as the V-42 Stiletto designed by Lt. Colonel Robert T. Frederick who commanded the joint US and Canadian First Special Service Force and the United States Marine Raider Stiletto designed by Lieutenant Colonel Clifford H. Shuey. In the USSR, the Red Army issued a series of combat knives based on a single pattern, known as the NR Series.

In late 1942, the U.S. Marine Corps adopted the 1219C2, later designated the USMC Mark 2 Combat Knife or Knife, Fighting Utility, but better known in popular terminology as the KA-BAR.[6] The KA-BAR differed from WWI-era U.S. combat knives in that it was purposely designed as a dual-purpose weapon, adapted for both combat and as a utility knife.[6][7] It also differed from some earlier USMC knives such as the Marine Raider Stiletto in that the new knife used a stout, wide blade with clip point that facilitated slashing attacks as well as blade thrusts.[8] Subsequent reports on the effectiveness of the new knife in jungle combat substantiated the Marine Corps decision to standardize the KA-BAR as the USMC's fighting knife for individual Marines.[7]

The U.S. Army adopted the M3 Trench Knife in 1943 as its standard combat knife. The M3 replaced the earlier WWI-vintage Mark I trench knife in combat service. The M3 was a true combat knife, as it was designed for solely for military use and was primarily intended as a fighting knife, though some compromises were made in the design to conserve strategic materials.[9][10][11] When adapted to utility tasks such as opening ration tins or ammunition boxes, the limitations of the M3 pattern quickly became apparent.[10]

In the United States, Knifemaker Bo Randall began production of the "All Purpose Fighting Knife" giving it the designation of "Number 1" in his catalog. Between 1942 and 1945, Randall Made Knives produced 4,000 of these knives for battlefield use by US troops, with approximately 1,058 knives additionally subcontracted to another firm to meet wartime demand. In the 1950s Randall would adopt the general pattern of the Bowie knife for several of his fighting knife designs.[12][13]


Designed for military use, with input for Capt. George Ingraham, a combat surgeon in the U.S. Army's 94th Medical Detachment, the No. 14 Randall "Attack" Model was a popular combat knife used after World War II by many soldiers and marines. During Vietnam, Randall received feedback from Captain Ingraham, who requested serrations on the spine to cut through the fuselage of downed aircraft to rescue trapped personnel and a hollow handle to allow storage of survival gear. Randall made the changes and the result was the first of the modern survival knives.[13]

Another combat knife appearing during the Vietnam War was the Gerber Mark II, designed for military use by US Army Captain Bud Holzman and Al Mar which in turn was based on the pattern of a Roman Mainz Gladius or short sword.[14] In the 1970s and 1980s a student and protege of Fairbairn, Colonel Rex Applegate worked with knife designer Bill Harsey, Jr. to design the Applegate-Fairbairn Combat Knife, so named because it was designed as an improvement on the Fairbairn-Sykes based upon discussions Applegate and Fairbairn had during World War II to eliminate the weaknesses of the F-S knife (e.g., weak blade point, inability to determine orientation of blade merely by grip). The first of these knives were made by Al Mar Knives, based on Harsey's designs.[15]

Knifemaker Bill Harsey later teamed up with Chris Reeve to design the Yarborough Knife, a combat knife presented to each graduate of the United States Army Special Forces Qualification Course. In the latest step of this evolution, Bill Harsey and Chris Reeve have collaborated with the father of the Modern Army Combatives Program, Matt Larsen, to design the LHR Combat knife.

See also


  1. ^ Burton, Walter E., Knives For Fighting Men, Popular Science, July 1944, Vol. 145 No. 1, p. 150: A combat knife is specifically designed for military use, and is thus a more restrictive category than that of a fighting knife or tactical knife, either of which may include knives designed for civilian use. Thus, a bowie knife designed for civilian sale and use may be termed a fighting knife, but not a combat knife, while the U.S. Army's M3 trench knife, designed specifically for the military for close-quarters fighting, is both a combat knife and a fighting knife.
  2. ^ a b c Walker, Greg (1993). Battle Blades: A Professional's Guide to Combat/Fighting Knives. Boulder, Colo.: Paladin Press. pp. 130. ISBN 0-87364-732-7. 
  3. ^ Pacella, Gerard (2002). 100 Legendary Knives. Iola, Wis.: Krause Publications. ISBN 0873494172. 
  4. ^ Wise, Terence, and McBride, Angus, Ancient Armies of the Middle East, London: Osprey Publishing, ISBN 0850453844 (1981), p. 24
  5. ^ a b Walker(1993) p. 28
  6. ^ a b Shackleford, Steve (ed.), Blade's Guide To Knives And Their Values (7th ed.), Iola, WI: Krause Publications, ISBN 9781440203879, p. 387
  7. ^ a b Sledge, E.B., With The Old Breed: At Peleleiu and Okinawa, Presidio Press, ISBN 9780891419198 (2007), pp. 21-22
  8. ^ MCRP 3-02B: Close Combat, Washington, D.C.: Department Of The Navy, Headquarters United States Marine Corps, 12 February 1999: "Marines use slashing techniques to close with an enemy. Slashing techniques distract or damage an opponent so Marines can close in."
  9. ^ Catalog of Standard Ordnance Items, Washington, D.C: U.S. Army Ordnance Publications (1943)
  10. ^ a b Cassidy, William L. (1997), The Complete Book of Knife Fighting, ISBN 0873640292, 9780873640299 (1997), pp. 47-48
  11. ^ Whitman, L., New Army Trench Knife, Army & Navy Journal, Vol. 80, 6 February 1943, p. 649
  12. ^ Walker(1993) pp. 50-55
  13. ^ a b Pacella (2002)pp. 130-131
  14. ^ Dick, Steven (November 2008). "Vietnam Legend Returns". Tactical Knives Magazine: 30. 
  15. ^ Pacella (2002) p. 145

External links

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Knife fight — A knife fight (sometimes incorrectly referred to as a duel) is a violent physical confrontation between two or more combatants in which one or more participants is armed with a knife.[1][2] A knife fight is defined by the presence of a knife as a …   Wikipedia

  • Knife — A knife is a handheld sharp edged instrument consisting of handle attached to a blade used for cutting. The knife is a tool that can be used as a weapon. Its origins date as far back as two and a half million years ago, as evidenced by the… …   Wikipedia

  • Combat Hapkido — Also known as Chon Tu Kwan Hapkido, Combat Hapkido Focus Hybrid Country of origin …   Wikipedia

  • Knife throwing — is an art, sport, or variously an entertainment technique, involving an artist skilled in the art of throwing knives, the weapons thrown, and a target.The throwing knifeThe desirable properties for a throwing knife differ from those of a common… …   Wikipedia

  • Knife — (n[imac]f), n.; pl. {Knives} (n[imac]vz). [OE. knif, AS. cn[=i]f; akin to D. knijf, Icel. kn[=i]fr, Sw. knif, Dan. kniv.] 1. An instrument consisting of a thin blade, usually of steel and having a sharp edge for cutting, fastened to a handle, but …   The Collaborative International Dictionary of English

  • Knife grass — Knife Knife (n[imac]f), n.; pl. {Knives} (n[imac]vz). [OE. knif, AS. cn[=i]f; akin to D. knijf, Icel. kn[=i]fr, Sw. knif, Dan. kniv.] 1. An instrument consisting of a thin blade, usually of steel and having a sharp edge for cutting, fastened to a …   The Collaborative International Dictionary of English

  • Combat sport — Boxing is a common fighting sport Characteristics Contact Yes Team members No Mixed gender No …   Wikipedia

  • Combat in film — Staged fights in Cinema include performances of classical fencing, historical fencing, martial arts, close combat and duels in general, as well as choreography of full scale battles. Contents 1 Asian martial arts 2 Battles 3 …   Wikipedia

  • knife — noun 1 tool for cutting ADJECTIVE ▪ blunt, dull (esp. AmE) ▪ sharp ▪ serrated ▪ long ▪ small …   Collocations dictionary

  • knife fight — noun fighting with knives • Syn: ↑snickersnee, ↑cut and thrust • Hypernyms: ↑fight, ↑fighting, ↑combat, ↑scrap …   Useful english dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”