Digital Flat Panel

DFP

Type	Digital video connector
Superseded	VGA connector
Superseded by	Digital Visual Interface
General specifications
Pins	20
Data
Data signal	PanelLink protocol Transition Minimized Differential Signaling
Width	3 bits plus clock
Max. devices	1
Protocol	Serial
Pin out
Pin 1	TMDS data 1 +
Pin 2	TMDS data 1 -
Pin 3	GND
Pin 4	GND
Pin 5	TMDS data C +
Pin 6	TMDS data C -
Pin 7	GND
Pin 8	+ 5V
Pin 9	Reserved
Pin 10	Reserved
Pin 11	TMDS data 2 +
Pin 12	TMDS data 2 -
Pin 13	GND
Pin 14	GND
Pin 15	TMDS data 0 +
Pin 16	TMDS data 0 -
Pin 17	Reserved
Pin 18	Reserved
Pin 19	DDC data
Pin 20	DDC clock

Digital Flat Panel (DFP) is a video connector for flat panel displays. It features 20 pins and uses the PanelLink protocol.

Unlike DVI, DFP never achieved widespread implementation. The connector was used by displays such as the Compaq Presario FP400, FP500, 5204, and 5280. It was offered on graphics cards such as the Xpert LCD, and Rage LT Pro by ATI Technologies Inc.

DFP was superseded by DVI because of a low maximum resolution of 1280x1024 (SXGA), whereas DVI supports much higher resolutions.

• 

  male DFP connector

• 

  female DFP connector

• 

  DVI-DFP adapter

External links

• DFP diagram and description of pin layout
• DFP is mentioned in ATI's description of the Xpert LCD