- One-way mirror
-
A one-way mirror, also known as a two-way mirror, one-way glass, or two-way glass is a mirror which is partially reflective and partially transparent. When one side of the mirror is brightly lit and the other is dark, it allows viewing from the darkened side but not vice versa.[1]
Contents
Design
The glass is coated with, or encases, a thin and almost-transparent layer of metal (usually aluminium). The result is a mirrored surface that reflects some light and is penetrated by the rest.
When one side is brightly lit and the other kept dark, the darker side becomes difficult to see from the brightly lit side because it is masked by the much brighter reflection of the lit side.
Use
A two-way mirror is typically used as an apparently normal mirror in a brightly lit room, with a much darker room on the other side. People on the brightly lit side see their own reflection—it looks like a normal mirror. People on the dark side see through it—it looks like a transparent window. The light from the bright room reflected from the mirror back into the room itself is much greater than the light transmitted from the dark room, overwhelming the small amount of light transmitted from the dark to the bright room; conversely, the light reflected back into the dark side is overwhelmed by the light transmitted from the bright side. This allows a viewer in the dark side to observe the bright room covertly.
When such mirrors are used for one-way observation, the viewing room is kept dark by a darkened curtain or a double door vestibule. These observation rooms have been used in:
- Interrogation rooms
- Execution rooms
- Experimental research
- Security observation decks in public areas
- Market research
- Reality television, as in the series, Big Brother, which makes extensive use of two-way mirrors throughout its set to allow cameramen in special black hallways to use movable cameras to film contestants without being seen.[citation needed]
- Train conductor rooms of newer metro trains, such as Bombardier Transportation's Movia family of metro trains, including the Toronto Rocket
Smaller versions are sometimes used in:
- Security cameras, where the camera is hidden in a mirrored enclosure
- Teleprompters, where they allow a presenter to read from text projected onto glass directly in front of a film or television camera
- Stage effects (particularly Pepper's ghost)
- Low-emissivity windows on vehicles and housing
There is nowadays a trend for use of glass and even foil based setups of such mirrors in showcase, arts and staging setups, somewhat comparable to Pepper's ghost, in very large dimensions. The second image blended to the scenery in this cases is then either a flat screen or a projection from one or more video beamers rasing the illusion that an image is there in free air somewhat behind the mirroring surface. That technique was used at a few public locations (e.g., for creating special effects in live fashion shows). Sometimes the term holographic display stands very close even though that sort of device is a totally different category. The image is indeed as flat as the projection that it is based upon.[citation needed] One such commercially available entertainment product is the Musion Eyeliner.
The same type of mirror, when used in an optical instrument, is called a half-silvered mirror or beam splitter. Its purpose is quite different: to split a beam of light so that part, usually about half, passes straight through, while the other part is reflected. In a typical scientific application the two resulting beams are made to interfere after traversing different paths. An unusual single-lens reflex camera used a half-silvered mirror to create an image of the scene both in the film plane and in the viewfinder.
See also
References
- ^ "Two-Way Mirrors". Jimloy.com. http://www.jimloy.com/physics/mirror0.htm. Retrieved 2010-11-06.
Categories:- Security
- Mirrors
- Rooms
Wikimedia Foundation. 2010.