Cone wrench

Cone wrench
Double-ended cone wrenches, 13–16mm

A cone wrench is a tool used in bicycle maintenance to access flats on axles where very little of the axle is exposed. It is similar to an open-ended wrench but much thinner: typically about 2 mm thick, compared to approximately 7 mm for a standard open-ended wrench.

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Wrench — For other uses, see Wrench (disambiguation). A set of chrome vanadium metric wrenches, open at one end, box/ring at the other. This type is commonly known as a combination wrench. A wrench or spanner is a tool used to provide grip and mechanical… …   Wikipedia

  • Crusher — For other uses, see Crusher (disambiguation). A crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or rock dust. Crushers may be used to reduce the size, or change the form, of waste materials so they can be more… …   Wikipedia

  • Oxy-fuel welding and cutting — Oxyacetylene redirects here. For the song, see Cubanate. Side of metal, cut by oxygen propane cutting torch …   Wikipedia

  • Lathe (metal) — Center lathe with DRO and chuck guard. Size is 460 mm swing x 1000 mm between centers A metal lathe or metalworking lathe is a large class of lathes designed for precisely machining relatively hard materials. They were originally designed to… …   Wikipedia

  • Countersink — A countersink is a conical hole cut into a manufactured object, or the cutter used to cut such a hole. A common usage is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the… …   Wikipedia

  • Continuously variable transmission — Transmission types Manual Sequential manual Non synchronous Preselector Automatic Manumatic Semi automatic Electrohydraulic Dual …   Wikipedia

  • Screw — This article is about the fastener. For other uses, see Screw (disambiguation). Screws come in a variety of shapes and sizes for different purposes. U.S. quarter coin (diameter 24 mm) shown for scale. A screw, or bolt, is a type of fastener… …   Wikipedia

  • List of problems solved by MacGyver — This is a list of problems that have been solved by the fictional character MacGyver from the television series of the same name. (This list is not yet comprehensive.) MacGyver employs his resourcefulness and his knowledge of chemistry,… …   Wikipedia

  • Machine taper — A machine taper is a system for securing cutting bits and other accessories to a machine tool s spindle. Contents 1 Explanation 2 Use 3 Types 3.1 Morse 3.1.1 …   Wikipedia

  • Spade — For other uses, see Spade (disambiguation). small spade for clay soil; the other one for sandy soil and loamy soil A spade is a tool designed primarily for the purpose of digging or removing earth.[1] Early spades were made of riven wood. After… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”