- Cisco Bridges
-
CPR bridge (black) in foreground, CNR bridge (orange arch) in background (with CPR train on it). Photo facing upriver.
CNR Cisco Bridge Carries Canadian National Railway Crosses Fraser River Locale Siska, BC Design truss arch bridge Total length 247 m Height 67 m Coordinates 50°09′05″N 121°34′52″W / 50.151505°N 121.581114°WCoordinates: 50°09′05″N 121°34′52″W / 50.151505°N 121.581114°W CPR Cisco Bridge Carries Canadian Pacific Railway Crosses Fraser River Locale Siska, BC Design truss bridge Total length 160 m Coordinates 50°08′55″N 121°34′42″W / 50.148535°N 121.5784°W The Cisco Bridges are a pair of railroad bridges at Siska (historically known as Cisco) near Lytton, British Columbia, Canada[1]. The Canadian Pacific Railway and Canadian National Railway both follow the route of the Fraser River, one on each side, and the routes exchange sides at this point. The easier CPR route was laid first; when the CNR arrived later they needed to follow the more difficult route.[2] The area is popular with railfans[3] due to the proximity of the two bridges (which allows both bridges to be taken in one photograph, sometimes with a CPR and CNR train on each bridge simultaneously[4]), and the easy access to the area (the Trans-Canada Highway (BC Hwy 1) is parallel to both bridges down the east bank of the river. Directional running in the Fraser Canyon means that both CPR and CNR trains may be seen on both bridges.
Contents
Canadian National Railway
The Canadian National bridge is a truss arch bridge, 247 metres (810 ft) long and 90 metres (300 ft) high. The north-west end of the bridge abuts into a near-vertical rock face. The south-east end of the bridge crosses the CPR tracks about 100 metres (330 ft) north of the CPR bridge.
Canadian Pacific Railway
The Canadian Pacific bridge is a 3-span, 160 metres (520 ft)-long truss bridge[5]. There are two short Pratt truss spans at each end of the longer Parker truss main span. The south end of the bridge (on the west bank of the river) enters directly into the Cantilever Bar Tunnel[6], in the side of the Cisco Bluff.
The original CPR Cisco Bridge, c.1900. Cantilever Bar Tunnel in background. Photo facing downriver.The original span[7] was pre-fabricated in England and shipped to Canada in 1883.[8] When the current bridge was built at Cisco in 1910, the original span was moved to the Esquimalt and Nanaimo Railway on Vancouver Island to cross the Niagara Creek Canyon (48°28′57″N 123°33′27″W / 48.4825°N 123.5574°W), where it is still in use (now by the Southern Railway of Vancouver Island).
Wide view of area showing full length of CPR tunnel from left end of black bridge in centre to left edge of photo. Photo facing upriver.References
- ^ http://cdnrail.railfan.net/Cisco/
- ^ http://wikimapia.org/8743784/Siska-Cisco-Double-crossing-of-the-Fraser
- ^ http://www.railpictures.net/showphotos.php?location=Cisco
- ^ http://www.railpictures.net/viewphoto.php?id=295377
- ^ http://wikimapia.org/8743784/Siska-Cisco-Double-crossing-of-the-Fraser
- ^ http://www.railpictures.net/viewphoto.php?id=163400
- ^ http://www.mccord-museum.qc.ca/largeimages/v1749.jpg
- ^ Turner, R. D.: West of the Great Divide, page 74.
External links
Categories:- Canadian National Railway bridges and tunnels
- Canadian Pacific Railway bridges and tunnels
- Railway bridges in British Columbia
- Bridges over the Fraser River
- Canada rail transport stubs
- Canadian bridge (structure) stubs
Wikimedia Foundation. 2010.
