Chemical vapor deposition of ruthenium

Chemical vapor deposition of ruthenium

Chemical vapor deposition of ruthenium is a method to deposit thin layers of ruthenium on substrate by Chemical vapor deposition (CVD).

A unique challenge arises in trying to grow impurity-free films of a catalyst in Chemical vapor deposition (CVD). Ruthenium metal activates C-H and C-C bonds, that aids C-H and C-C bond scission. This creates a potential catalytic decomposition path for all metal-organic CVD precursors that is likely to lead to significant carbon incorporation. Platinum, a chemically similar catalyst, catalyzes dehydrogenation of five- and six-member cyclic hydrocarbons into benzene.[1] The d-bands of ruthenium lie higher than those in platinum, generally predicting stronger ruthenium-adsorbate bonds than on platinum. Therefore, it is likely that ruthenium also catalyzes dehydrogenation of five- and six-member hydrocarbon rings to benzene. Benzene dehydrogenates further on ruthenium surfaces into hydrocarbon fragments similar to those formed by acetylene and ethene on ruthenium surfaces.[2] In addition to benzene, acetylene and ethene, pyridine also decomposes on ruthenium surfaces, leaving bound fragments on the surface. Ruthenium is unusually well studied in the surface science and catalysis literature due to its industrial importance as a catalyst. There are many studies of individual molecular behavior on ruthenium in surface science. However, understanding the behavior of each ligand on its own is not equivalent to understanding their behavior when co-adsorbed with each other and with the precursor. While there is no significant pressure difference between surface science studies and CVD, there is often a temperature gap between temperatures reported in surface science studies and CVD growth temperatures. Despite these complications, ruthenium is a promising candidate for understanding chemical vapor deposition and precursor design of catalytic films.

Ligands that are stable compounds in their own right, short ligand-ruthenium contact times and moderate substrate temperatures help minimize unwanted ligand decomposition on the surface.[3][4] The C-H and C-C bond activation is temperature-dependent. Product desorption is also temperature-dependent, if the products are not bound to the ruthenium surface. This suggests that there is some optimum temperature, at which most independently stable ligands have just enough thermal energy to desorb from the ruthenium film surface before C-H activation can occur. For example, benzene starts decomposing on ruthenium at 87°C. However, the dehydrogenation reaction does not go to fragments until 277°C, and compete fragmentation is not seen at low surface coverage. This suggests that provided adsorbed benzene molecules are not close to one another on the surface and temperatures are below 277°C, the vast majority of benzene molecules may not contribute to carbon incorporation in films. Therefore, a key consideration in growing CVD films of catalytic metals such as ruthenium is combining molecule design and the kinetic aspects of growth in a favorable way.

Before metal-organic precursors were explored, triruthenium dodecacarbonyl (Ru3(CO)12) was tested as a CVD precursor.[5][6] While this precursor gives good-quality films, the vapor pressure is poor, complicating its practical use in a CVD process. Ruthenocene[7][8] and bis(ethylcyclopentadienyl)ruthenium(II)[9][10][11][12] and beta-diketonate ruthenium(II) compounds[13][14][15] have been fairly extensively explored. Although these precursors also can give pure films of low resistivity when reacted with oxygen, the growth rates are very low or not reported. One high-growth precursor, cyclopentadienyl-propylcyclopentadienylruthenium(II) (RuCp(i-PrCp)), has been identified.[16] (RuCp(i-PrCp) has achieved growth rates of 7.5 nm/min to 20 nm/min as well as low resistivities. However, it does not nucleate on oxides, ruling out its use in all applications but copper interconnect layers.

A new zero-valent, single-source precursor design paradigm was launched with (1,5-cyclooctadiene)(toluene)Ru(0) ((1,5-COD)(toluene)Ru)[17] and (1,3-cyclohexadiene)(benzene)Ru(0) ((1,3-CHD)(benzene)Ru),[3] also independently tested[18] Using (1,5-COD)(toluene)Ru; it was found that C-H bonds were readily activated in 1,5-COD. Although carbon incorporation levels were low (1-3%), the growth rates were only around 0.28 nm/min at best. Using (1,3-CHD)(benzene)Ru, the 1,3-CHD was dehydrogenated to benzene as expected, but the large variety of possible surface reactions involving the two ligands resulted in a narrow process window in which carbon concentrations were low.

References

  1. ^ Manner, W. L; Girolami, G. S; Nuzzo, R. G (1998). "Sequential Dehydrogenation of Unsaturated Cyclic C5 and C6 Hydrocarbons on Pt(111)". J. Phys. Chem. B 102 (50): 10295–10306. doi:10.1021/jp9830272. 
  2. ^ Jakob, P; Menzel, D. (1988). "The adsorption of benzene on Ru(001)". Surface Science 210 (3): 503–530. doi:10.1016/0039-6028(88)90500-6. 
  3. ^ a b Schneider, A; Popovska, N; Jipa, I; Atakan, B; Siddiqi, M. A; Siddiqui, R; Zenneck, U (2007). "Minimizing the carbon content of thin ruthenium films by MOCVD precursor complex design and process control". Chemical Vapor Deposition 13 (8): 389–395. doi:10.1002/cvde.200606582. 
  4. ^ Schneider, A; Popovska, N; Holzmann, F; Gerhard, H; Topf, C; Zenneck, U (2005). "(1,5-Cyclooctadiene)(toluene)ruthenium(0): A Novel Precursor for the MOCVD of Thin Ruthenium Films". Chemical Vapor Deposition 11 (2): 99–105. doi:10.1002/cvde.200406315. 
  5. ^ Green, M. L; Gross, M. L; Papa, L. E; Schnoes, K. J; Brasen, D (1985). "Chemical Vapor Deposition of Ruthenium and Ruthenium Dioxide Films". Journal of the Electrochemical Society 132 (11): 2677. doi:10.1149/1.2113647. 
  6. ^ Wang, Q; Ekerdt, J. G; Gay, D; Sun, Y.-M; White, J. M (2004). "Low-temperature chemical vapor deposition and scaling limit of ultrathin Ru films". Applied Physics Letters 84 (8): 1380–1382. doi:10.1063/1.1650044. 
  7. ^ Trent, D. E; Paris, B; Krause, H. H (1964). "Vapor Deposition of Pure Ruthenium Metal from Ruthenocene". Inorg. Chem. 3 (7): 1057–1058. doi:10.1021/ic50017a041. 
  8. ^ Park, S. E; Kim, H. M; Kim, K. B; Min, S. H (2000). "Metallorganic chemical vapor deposition of Ru and RuO2 using ruthenocene precursor and oxygen gas". Journal of the Electrochemical Society 147 (1): 203–209. doi:10.1149/1.1393175. 
  9. ^ Aoyama, T; Eguchi, K (1999). "Ruthenium films prepared by liquid source chemical vapor deposition using bis-(ethylcyclopentadienyl)ruthenium". Japanese Journal of Applied Physics 38 (10A): 1134–6. doi:10.1143/JJAP.38.L1134. 
  10. ^ Kang, S. Y; Choi, K. H; Lee, S. K; Hwang, C. S; Kim, H. J (2000). "Thermodynamic Calculations and Metallorganic Chemical Vapor Deposition of Ruthenium Thin Films Using Bis(ethyl-pi-cyclopentadienyl)Ru for Memory Applications". Journal of the Electrochemical Society 147 (3): 1161–7. doi:10.1149/1.1393330. 
  11. ^ Matsui, Y; Hiratani, M; Nabatame, T; Shimamoto, Y; Kimura, S (2002). "Characteristics of Ruthenium Films Prepared by Chemical Vapor Deposition Using Bis(ethylcyclopentadienyl)ruthenium Precursor". Electrochemical and Solid-State Letters 5 (1): C18. doi:10.1149/1.1425263. 
  12. ^ Nabatame, T; Hiratani, M; Kadoshima, M; Shimamoto, Y; Matsui, Y; Ohji, Y; Asano, I; Fujiwara, T et al. (2000). "Properties of ruthenium films prepared by liquid source metalorganic chemical vapor deposition using Ru(EtCp)2 with tetrahydrofuran solvent". Japanese Journal of Applied Physics 39 (11B): 1188–90. doi:10.1143/JJAP.39.L1188. 
  13. ^ Kadoshima, M; Nabatame, T; Hiratani, M; Nakamura, Y; Asano, I; Suzuki, T (2002). "Ruthenium Films Prepared by Liquid Source Metalorganic Chemical Vapor Deposition Using Ru(dpm)3 Dissolved with Tetrahydrofuran Solvent". Japanese Journal of Applied Physics 41 (3B): L347–L350. doi:10.1143/JJAP.41.L347. 
  14. ^ Lai, Y.-H; Chen, Y.-L; Chi, Y; Liu, C.-S; Carty, A. J; Peng, S.-M; Lee, G.-H (2003). "Deposition of Ru and RuO2 thin films employing dicarbonyl bis-diketonate ruthenium complexes as CVD source reagents". Journal of Materials Chemistry 13 (8): 1999–2006. doi:10.1039/b300517h. 
  15. ^ Lee, J.-H; Kim, J.-Y; Rhee, S.-W; Yang, D; Kim, D.-H; Yang, C.-H; Han, Y.-K; Hwang, C.-J (2000). "Chemical vapor deposition of Ru thin films by direct liquid injection of Ru(OD)3 (OD=octanedionate)". Journal of Vacuum Science & Technology A 18 (5): 2400–2403. doi:10.1116/1.1289693. 
  16. ^ Kang, S. Y; Lim, H. J; Hwang, C. S; Kim, H. J (2002). "Metallorganic chemical vapor deposition of Ru films using cyclopentadienyl-propylcyclopentadienylruthenium(II) and oxygen". Journal of the Electrochemical Society 149 (6): C317–C323. doi:10.1149/1.1471547. 
  17. ^ Schneider, A; Popovska, N; Holzmann, F; Gerhard, H; Topf, C; Zenneck, U. (2005). "[(1,5-Cyclooctadiene)(toluene)ruthenium(0)]: A Novel Precursor for the MOCVD of Thin Ruthenium Films". Chemical Vapor Deposition 11 (2): 99–105. doi:10.1002/cvde.200406315. 
  18. ^ Choi, J; Choi, Y; Hong, J; Tian, H; Roh, J.-S; Kim, Y; Chung, T.-M; Woo Oh, Y et al. (2002). "Composition and Electrical Properties of Metallic Ru Thin Films Deposited Using Ru(C6H6)(C6H8) Precursor". Japanese Journal of Applied Physics 41 (11B): 6852–6856. doi:10.1143/JJAP.41.6852. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Ruthenium — (pronEng|ruːˈθiːniəm) is a chemical element that has the symbol Ru and atomic number 44. A rare transition metal of the platinum group of the periodic table, ruthenium is found associated with platinum ores and used as a catalyst in some platinum …   Wikipedia

  • Ruthenium(IV) oxide — Chembox new ImageFile = Rutile unit cell 3D balls.png ImageSize = 200px Name = Ruthenium(IV) oxide IUPACName = Ruthenium(IV) oxide Section2 = Chembox Properties Formula = RuO2 MolarMass = 133.07 g/mol (anhydrous) Appearance = Black crystalline… …   Wikipedia

  • Boron nitride — IUPAC name Boron nitride Identifiers …   Wikipedia

  • Solar cell — A solar cell made from a monocrystalline silicon wafer …   Wikipedia

  • E173 — Eigenschaften …   Deutsch Wikipedia

  • E 173 — Eigenschaften …   Deutsch Wikipedia

  • Radioactive waste — 2007 ISO radioactivity danger logo, designed in part for long term radioactive waste depositories which might survive into a far future time in which all knowledge of the meaning of present common radiation danger symbols and signs has been lost… …   Wikipedia

  • Nanomesh — Perspective view of nanomesh, whose structure ends at the back of the figure. The distance between two pore centers is 3.2nm, and the pores are 0.05nm deep. The nanomesh is a new inorganic nanostructured two dimensional material, similar to… …   Wikipedia

  • Colored gold — Ternary plot of different colors of Ag Au Cu alloys While pure gold is yellow in color, colored gold can be developed into various colors. These colors are generally obtained by alloying gold with other elements in various proportions. For… …   Wikipedia

  • Samarium — promethium ← samarium → europium ↑ Sm ↓ …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”