China Seismic Intensity Scale

The China Seismic Intensity Scale (CSIS) is a national standard in the People's Republic of China^[1] used to measure seismic intensity. Similar to EMS-92 on which CSIS drew reference, seismic impacts are classified into 12 degrees of intensity, or liedu (Chinese: 烈度; pinyin: lièdù, literally "degrees of violence") in Roman numerals from I for insensible to XII for landscape reshaping.

The scale was initially formalized by the China Earthquake Administration (CEA) in 1980, therefore often referred to by its original title as "China Seismic Intensity Scale (1980)". It was later revised, and adopted as a national standard, or Guobiao, series GB/T 17742-1999 by then National Quality and Technology Supervision Administration (now General Administration of Quality Supervision, Inspection, and Quarantine of P.R.C., AQSIQ) in 1999.^[2] The standard was set for revision not long before the 2008 Sichuan earthquake.^[3]

Liedu Scale

Unlike the magnitude scales that objectively estimate the released seismic energy, liedu denotes how strongly an earthquake affects a specific place. It is determined by a combination of subjective evaluations (such as human senses and building damages) and objective kinetic measures. Building damages are further refined with a combination of descriptive qualifiers and a numeric evaluation process.

The following is an unofficial translation of the Appendix I of GB/T 17742-1999.

Table of Liedu^[2]

Liedu (Intensity)	Senses by people on the ground	Degree of building damage		Other damages	Horizontal motion on the ground
		Damages	Mean damage index		Peak acceleration m/s2	Peak speed m/s
I	Insensible
II	Sensible by very few still indoor people
III	Sensible by a few still indoor people	Slight rattle of doors and windows		Slight swing of suspended objects
IV	Sensible by most people indoors, a few people outdoors; a few wake up from sleep	Rattle of doors and windows		Obvious swing of suspended objects; vessels rattle
V	Commonly sensible by people indoors, sensible by most people outdoors; most wake up from sleep	Noise from vibration of doors, windows, and building frames; falling of dusts, small cracks in plasters, falling of some roof tiles, bricks falling from a few roof-top chimneys		Rocking or flipping of unstable objects	0.31 (0.22 - 0.44)	0.03 (0.02 - 0.04)
VI	Most unable to stand stably, a few scared to running outdoors	Damages - Cracks in the walls, falling of roof tiles, some roof-top chimneys crack or fall apart	0 - 0.10	Cracks in river banks and soft soil; occasional burst of sand and water from saturated sand layers; cracks on some standalone chimneys	0.63 (0.45 - 0.89)	0.06 (0.05 - 0.09)
VII	Majority scared to running outdoors, sensible by bicycle riders and people in moving motor vehicles	Slight destruction - localized destruction, crack, may continue to be used with small repairs or without repair	0.11 - 0.30	Collapse of river banks; frequent burst of sand and water from saturated sand layers; many cracks in soft soils; moderate destruction of most standalone chimneys	1.25 (0.90 - 1.77)	0.13 (0.10 - 0.18)
VIII	Most swing about, difficult to walk	Moderate destruction - structural destruction occurs, continued usage requires repair	0.31 - 0.50	Cracks appear in hard dry soils; severe destruction of most standalone chimneys; tree tops break; death of people and cattle caused by building destruction	2.50 (1.78 - 3.53)	0.25 (0.19 - 0.35)
IX	Moving people fall	Severe destruction - severe structural destruction, localized collapse, difficult to repair	0.51 - 0.70	Many cracks in hard dry soils; possible cracks and dislocations in bedrock; frequent landslides and collapses; collapse of many standalone chimneys	5.00 (3.54 - 7.07)	0.50 (0.36 - 0.71)
X	Bicycle riders may fall; people in unstable state may fall away; sense of being thrown up	Most collapse	0.71 - 0.90	Cracks in bedrock and earthquake fractures; destruction of bridge arches founded in bedrock; foundation damage or collapse of most standalone chimneys	10.00 (7.08 - 14.14)	1.00 (0.72 - 1.41)
XI		Wide spread collapse	0.91 - 1.00	Earthquake fractures extend a long way; many bedrock cracks and landslides
XII				Drastic change in landscape, mountains, and rivers

Notes about Qualifiers: "very few" - <10%; "few" - 10% - 50%; "most" - 50% - 70%; "majority" - 70% - 90%; "commonly" - >90%.

Applications

Historic local seismic liedu is an important reference in quake proofing existing and future buildings. The national standard Code for Seismic Design of Buildings (GB 500011-2001) published in 2001 and partially revised shortly after the 2008 Sichuan Earthquake includes a list of liedu that each building in designated cities is expected to resist.^[4]

See also

• Seismic scale
• Seismic engineering

Notes and references

1. ^ Effectively this only applies to mainland China. Hong Kong and Taiwan each use a different intensity scale. See Seismic scale#Intensity scales for more details.
2. ^ ^{a b} CHEN Dasheng, SHI Zhenliang, XU Zonghe, GAO Guangyi, NiAN Jiaquan, XIAO Chengye, FENG Yijun (陈达生、时振梁、徐宗和、高光伊、鄢家全、肖承邺、冯义钧) (1999-04-26). "China Seismic Intensity Scale (中国地震烈度表)" (in Chinese). General Administration of Quality Supervision, Inspection, and Quarantine of P.R.C.. http://www.dccdnc.ac.cn/html/zcfg/gfxwj2.jsp. Retrieved 2008-09-12. 
3. ^ "Revision of "China Seismic Intensity Scale" started (《中国地震烈度表》修订工作启动)" (in Chinese). China Earthquake Administration (中国地震局). 1999-04-26. http://www.cea.gov.cn/manage/html/8a8587881632fa5c0116674a018300cf/_history/08_06/30/1214800979031.html. Retrieved 2008-09-12. 
4. ^ XU Zhengzhong, WANG Yayong, et al. (徐正忠、王亚勇等) (2001). "Code for seismic design of buildings (GB 500011-2001) (partially revised in 2008), Appendix A ( 《建筑抗震设计规范》（GB 500011－2001） （2008 年局部修订） 附录 A 我国主要城镇抗震设防烈度、设计基本地震加速度和设计地震分组)". Ministry of Housing and Urban-Rural Development of PRC (MOHURD, 中华人民共和国住房和城乡建设部). http://www.morgain.com/Help/GB50011-2001/A.htm. Retrieved 2008-09-15. 

External links

• Spencer, B.F.; Hu, Y. X. (2001). Earthquake Engineering Frontiers in the New Millennium: Proceedings of the China-US Millennium Symposium on Earthquake Engineering, Beijing, 8–11 November 2000. Taylor & Francis. ISBN 9026518528, 9789026518522.