Fuel temperature coefficient of reactivity
- Fuel temperature coefficient of reactivity
-
Fuel temperature coefficient of reactivity is the change in reactivity of the nuclear fuel per degree change in the fuel temperature. The coefficient quantifies the amount of neutrons that the nuclear fuel (uranium-238) absorbs from the fission process as the fuel temperature increases. It is a measure of the stability of the reactor operations. This coefficient is also known as the Doppler coefficient.
See also
References
Categories:
- Fundamental physics concepts
- Nuclear physics
- Nuclear and atomic physics stubs
Wikimedia Foundation.
2010.
Look at other dictionaries:
Temperature coefficient — The temperature coefficient is the relative change of a physical property when the temperature is changed by 1 K. In the following formula, let R be the physical property to be measured and T be the temperature at which the property is… … Wikipedia
Void coefficient — In nuclear engineering, the void coefficient (more properly called void coefficient of reactivity ) is a number that can be used to estimate how much the reactivity of a nuclear reactor changes as voids (steam bubbles) form in the reactor… … Wikipedia
Nuclear fuel — Process … Wikipedia
Solid oxide fuel cell — A solid oxide fuel cell (SOFC) is an electrochemical conversion device that produces electricity directly from oxidizing a fuel. Fuel cells are characterized by their electrolyte material and, as the name implies, the SOFC has a solid oxide, or… … Wikipedia
Nuclear fuel cycle — The nuclear fuel cycle, also called nuclear fuel chain, is the progression of nuclear fuel through a series of differing stages. It consists of steps in the front end, which are the preparation of the fuel, steps in the service period in which… … Wikipedia
Pressurized water reactor — (PWRs) (also VVER if of Russian design) are generation II nuclear power reactors that use ordinary water under high pressure (superheated water) as coolant and neutron moderator. The primary coolant loop is kept under high pressure to prevent the … Wikipedia
SL-1 — The SL 1, or Stationary Low Power Reactor Number One, was a United States Army experimental nuclear power reactor which underwent a steam explosion and meltdown in January 1961, killing its three operators. The direct cause was the improper… … Wikipedia
Critical mass — This article is about nuclear fission reactions. For other uses, see Critical mass (disambiguation). As part of a re creation of a 1945 criticality accident, a plutonium pit is surrounded by blocks of neutron reflective tungsten carbide. The… … Wikipedia
Passive nuclear safety — describes a safety feature of a nuclear reactor that does not require operator action or electronic feedback in order to shut down safely in the event of a particular type of emergency (usually overheating resulting from a loss of coolant or loss … Wikipedia
Breeder reactor — Assembly of the core of Experimental Breeder Reactor I in Idaho, 1951 A breeder reactor is a nuclear reactor that generates more fissile material in fuel than it consumes.[1] These reactors are considered appealing due to their superior fuel… … Wikipedia
