XML namespace

XML namespace

xmlns tagged XML namespaces are used for providing uniquely named elements and attributes in an XML document. They are defined in a W3C recommendation.[1] An XML instance may contain element or attribute names from more than one XML vocabulary. If each vocabulary is given a namespace, the ambiguity between identically named elements or attributes can be resolved.

A simple example would be to consider an XML instance that contained references to a customer and an ordered product. Both the customer element and the product element could have a child element named id. References to the id element would therefore be ambiguous; placing them in different namespaces would remove the ambiguity.


Namespace names

A namespace name is a uniform resource identifier (URI). Typically, the URI chosen for the namespace of a given XML vocabulary describes a resource under the control of the author or organisation defining the vocabulary, such as a URL for the author's Web server. However, the namespace specification does not require nor suggest that the namespace URI be used to retrieve information; it is simply treated by an XML parser as a string. For example, the document at http://www.w3.org/1999/xhtml itself does not contain any code. It simply describes the XHTML namespace to human readers. Using a URI (such as "http://www.w3.org/1999/xhtml") to identify a namespace, rather than a simple string (such as "xhtml"), reduces the possibility of different namespaces using duplicate identifiers.

Although the term namespace URI is widespread, the W3C Recommendation refers to it as the namespace name. The specification is not entirely prescriptive about the precise rules for namespace names (it does not explicitly say that parsers must reject documents where the namespace name is not a valid Uniform Resource Identifier), and many XML parsers allow any character string to be used. In version 1.1 of the recommendation, the namespace name becomes an Internationalized Resource Identifier, which licenses the use of non-ASCII characters that in practice were already accepted by nearly all XML software. The term namespace URI persists, however, not only in popular usage, but also in many other specifications from W3C and elsewhere.

Following publication of the Namespaces recommendation, there was an intensive debate about how a relative URI should be handled, with some intensely arguing that it should simply be treated as a character string, and others arguing with conviction that it should be turned into an absolute URI by resolving it against the base URI of the document.[2] The result of the debate was a ruling from W3C that relative URIs were deprecated.[3]

The use of URIs taking the form of URLs in the http scheme (such as http://www.w3.org/1999/xhtml) is common, despite the absence of any formal relationship with the HTTP protocol. The Namespaces specification does not say what should happen, if such a URL is dereferenced (that is, if software attempts to retrieve a document from this location). One convention adopted by some users is to place a RDDL document at the location.[4] In general, however, users should assume that the namespace URI is simply a name, not the address of a document on the Web.

Namespace declaration

An XML namespace is declared using the reserved XML pseudo-attribute xmlns or xmlns:prefix, the value of which must be a valid namespace name.

For example, the following declaration maps the "xhtml:" prefix to the XHTML namespace:


Any element or attribute whose name starts with the prefix "xhtml:" is considered to be in the XHTML namespace, if it or an ancestor has the above namespace declaration.

It is also possible to declare a default namespace. For example:


In this case, any element without a namespace prefix is considered to be in the XHTML namespace, if it or an ancestor has the above default namespace declaration.

Attributes are never subject to the default namespace. An attribute without an explicit namespace prefix is considered not to be in any namespace.

Namespace undeclaration

When an element carries the attribute xmlns="", the default namespace for that element and its descendants reverts to "no namespace": that is, unprefixed names are considered not to be in any namespace.

XML Namespaces 1.1 also introduces the option to undeclare other namespace prefixes. For example, if the attribute xmlns:p="" appears on an element, the namespace prefix p is no longer in scope (and therefore cannot be used) on that element or on its descendants, unless reintroduced by another namespace declaration.

Namespaces in APIs and XML object models

Different specifications have taken different approaches on how namespace information is presented to applications.

Nearly all programming models allow the name of an element or attribute node to be retrieved as a three-part name: the local name, the namespace prefix, and the namespace URI. Applications should avoid attaching any significance to the choice of prefix, but the information is provided because it can be helpful to human readers. Names are considered equal, if the namespace URI and local name match.

In addition, most models provide some way of determining which namespaces have been declared for a given element. This information is needed because some XML vocabularies allow qualified names (containing namespace prefixes) to appear in the content of elements or attributes, as well as in their names. There are three main ways this information can be provided:

  • As attribute nodes named "xmlns" or "xmlns:xxx", exactly as the namespaces are written in the source XML document. This is the model presented by DOM.
  • As namespace declarations: distinguished from attributes, but corresponding one-to-one with the relevant attributes in the source XML document. This is the model presented by JDOM.
  • As in-scope namespace bindings: in this model, the application is able to determine which namespaces are in scope for any given element, but is not able to determine which elements contain the actual declarations. This is the model used in XPath, XSLT, and XQuery.

See also


  1. ^ Bray, Tim; Dave Hollander, Andrew Layman, Richard Tobin, Henry S. Thompson (December 2009). "Namespaces in XML 1.0". W3C. http://www.w3.org/TR/xml-names/. Retrieved 9 October 2010. 
  2. ^ Leigh Dodds (24 May 2000), News from the trenches, http://www.xml.com/pub/a/2000/05/24/deviant/index.html 
  3. ^ Dan Connolly (11 Sep 2000), W3C XML Plenary decision on relative URI references in namespace declarations 
  4. ^ Elliotte Rusty Harold (20 Feb 2001), RDDL Me This: What Does a Namespace URL Locate?, http://www.oreillynet.com/pub/a/oreilly/xml/news/xmlnut2_0201.html 

External links

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • XML-Namespace — XML Namensräume (englisch „XML namespaces“) werden benutzt, um in einem einzelnen Dokument mehrere XML Sprachen zu mischen. Ihre Funktionsweise ist mit Vorwahlen bei Telefonnummern zu vergleichen. Zum Beispiel beschreibt das <p> Element in… …   Deutsch Wikipedia

  • XML Certification Program — (XML Master) is IT professional certification for XML and related technologies. There are two levels of XML Certifications, XML Master Basic certification and XML Master Professional certification, and more than 16000 examiners have passed those… …   Wikipedia

  • Namespace-based Validation Dispatching Language — (NVDL) is an XML schema language for validating XML documents that integrate with multiple namespaces. It is an ISO/IEC standard, and it is Part 4 of the DSDL schema specification. Much of the work on NVDL is based on the older Namespace Routing… …   Wikipedia

  • XML-Namensraum — XML Namensräume (englisch „XML namespaces“) werden benutzt, um in einem einzelnen Dokument mehrere XML Sprachen zu mischen. Ihre Funktionsweise ist mit Vorwahlen bei Telefonnummern zu vergleichen. Zum Beispiel beschreibt das <p> Element in… …   Deutsch Wikipedia

  • XML Schema — XML Schema, abgekürzt XSD, ist eine Empfehlung des W3C zum Definieren von Strukturen für XML Dokumente. Anders als bei den klassischen XML DTDs wird die Struktur in Form eines XML Dokuments beschrieben. Darüber hinaus wird eine große Anzahl von… …   Deutsch Wikipedia

  • XML Signature — (also called XMLDsig , XML DSig , XML Sig ) is a W3C recommendation that defines an XML syntax for digital signatures. Functionally, it has much in common with PKCS#7 but is more extensible and geared towards signing XML documents. It is used by… …   Wikipedia

  • XML Base — ist eine vom World Wide Web Consortium empfohlene Möglichkeit, Basis URLs für Teile von XML Dokumenten zu definieren. Basis URL bezeichnet dabei diejenige URL, von der aus relative Pfadangaben im Dokument aufgelöst werden. Die XML Base Empfehlung …   Deutsch Wikipedia

  • XML Events — ist eine Spezifikation des W3C, um Ereignisse, die in einem XML Dokument auftreten, zu handhaben. Diese Ereignisse werden typischerweise durch einen Benutzer ausgelöst, der mit dem Dokument, einer Webseite, mit Hilfe eines Internetbrowsers auf… …   Deutsch Wikipedia

  • XML-binary Optimized Packaging — (XOP) ist eine W3C Empfehlung für die Repräsentation binärer Daten in XML Dokumenten. XOP ersetzt damit die sonst für die Repräsentation binärer Daten in XML Dokumenten üblichen Techniken wie Verwendung von CDATA Blöcken, Base64 Kodierung, SOAP… …   Deutsch Wikipedia

  • XML Information Set — (Infoset) ist ein W3C Standard mit dem Status einer Empfehlung. Die Infoset Spezifikation dient als Basis für eine Reihe anderer Spezifikationen, welche Aussagen zum formellen Informationsgehalt von XML Dokumenten zu machen haben. Ein… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”