Machinist square

Machinist square

A machinist square or engineer's square is the metalworkers' equivalent of a try square. It consists of a steel blade inserted and either welded or pinned into a heavier body at an angle of 90°. In the accompanying image, there is evidence of pinning at the intersection of the blade and body, where the heads of two pins are visible as dark circles.

In use the body is aligned against the one edge of the object and the blade is presented to the end or body of the object. If the end is being checked, then a strong light source behind the square will show any mismatch between the blade of the square and the end of the object. The purpose of this action is to either check for squareness or to mark out the body of the workpiece.

Squares must be occasionally checked for accuracy. The four disk method is one way to do this.

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • square — squarable, adj. squarelike, adj. squareness, n. squarer, n. /skwair/, n., v., squared, squaring, adj., squarer, squarest, adv. n. 1. a rectangle having all four sides of equal length …   Universalium

  • Combination square — with standard head A Combination Square consisting of the rul …   Wikipedia

  • Try square — A try square is a woodworking or a metal working tool used for marking and measuring a piece of wood. The square refers to the tool s primary use of measuring the accuracy of a right angle (90 degrees); to try a surface is to check its… …   Wikipedia

  • Milling cutter — Milling cutters are cutting tools typically used in milling machines or machining centres (and occasionally in other machine tools). They remove material by their movement within the machine (e.g., a ball nose mill) or directly from the cutter s… …   Wikipedia

  • Metalworking — Machining a bar of metal on a lathe. Metalworking is the process of working with metals to create individual parts, assemblies, or large scale structures. The term covers a wide range of work from large ships and bridges to precise engine parts… …   Wikipedia

  • Micrometer — This article is about the measuring device. For the unit of length, see Micrometre. Outside, inside, and depth micrometers A micrometer (   …   Wikipedia

  • Tool and die maker — Not to be confused with tap and die. Tool and die makers are workers in the manufacturing industry who make jigs, fixtures, dies, molds, machine tools, cutting tools (such as milling cutters and form tools), gauges, and other tools used in… …   Wikipedia

  • Wrench — For other uses, see Wrench (disambiguation). A set of chrome vanadium metric wrenches, open at one end, box/ring at the other. This type is commonly known as a combination wrench. A wrench or spanner is a tool used to provide grip and mechanical… …   Wikipedia

  • Forge — For the process of shaping metal by localized compressive forces, see Forging. For other uses, see Forge (disambiguation). A blacksmith s coal forge …   Wikipedia

  • Chisel — This article is about the tool. For the American band, see Chisel (band). For the album by Australian band Cold Chisel, see Chisel (album). Steel woodworking chisel …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”