Dennis Dart

Dennis Dart
Dennis Dart
First Manchester - P314 LND.JPG
A First Manchester Dennis Dart SLF 10.7m with Plaxton Pointer body in Heaton Park.
An Arriva North West Dennis Dart SLF Interior
Manufacturer Dennis/TransBus/Alexander Dennis
Built at Guildford, England
Operator(s) Arriva
Go-Ahead London
Stagecoach Group
First Group and others
Length Dart:
8.5m, 9m, 9.8m
Dart SLF:
8.8m, 9.2m, 9.3m, 10m, 10.1m, 10.6m, 10.7m and 11.3m
Floor type Step entrance/low floor
Doors 1 or 2 door
Engine(s) Cummins B Series
Cummins ISBe
Transmission Allison
Options Various customer options
The traditional Dennis and Dart badges.

The Dennis Dart is a rear-engined midibus built by Dennis in the United Kingdom. More than 11,000 were built during 18 years of production.

It has proved popular with many bus operators in the UK, and has since been sold in several other countries around the world.


Standard-floor Dart

The Dennis Dart was first planned around 1988 when Hestair Group (owner of Duple and Dennis) decided to produce a bus between a minibus and a full-sized single decker (i.e. a midibus) in the same year.[1]

It was launched in 1989 and was originally offered with the Duple Dartline bodywork. It was 2.3m wide and was initially available in the length of 9m, but later available in lengths of 8.5m and 9.8m. It was powered by a Cummins 6BT engine and coupled to the Allison AT545 gearbox (the same engine and gearbox were also used in the MCW Metrorider, latterly the Optare MetroRider).

This model was sold to London Buses and to some operators outside London. Unfortunately, however, soon after it was launched, Duple was sold to Plaxton and its Blackpool plant was closed down. Plaxton decided not to acquire the design rights of the Duple Dartline and it was sold to Carlyle, who continued producing the bodywork from 1991. Production passed to Marshall of Cambridge in 1992 who bodied five Darts to this design. In 1993, Marshall updated the design to the C36 and later, the C37.

In 1990, Wadham Stringer became the next builder to body the Dart with a body called the Portsdown, but it was sold in small numbers and replaced by the UVG Urbanstar in 1995. In the same year, Wright bodied the Dart with the Handybus. In early 1991, Plaxton launched the Pointer (which was initially designated as Reeve Burgess Pointer as it was built at Reeve Burgess's plant, until later in the same year when it was transferred to Plaxton at Scarborough). Later in 1991, East Lancs bodied the Dart with its EL2000. In the latter half of 1991, Alexander launched the Dash. Another contender entering the market at the same time was the Northern Counties Paladin. Initially, it was built with a design of a barrel shaped windscreen with quarterlights (which were mainly sold to Warrington Borough Transport), later models had a deep double-curvature two-piece windscreen. It was phased out when Plaxton bought Northern Counties in 1995.

As the low floor buses became more popular in late 1990s, orders for standard-floor Dart dropped heavily and production was ceased in 1998, with the final three delivered to Thames Transit.

Low-floor Dart SLF

In 1995, Dennis launched a low-floor version of the Dart called the Dennis Dart SLF (Super Low Floor), which later became known as the TransBus Dart/Alexander Dennis Dart.

It was 2.4m wide and initially offered in lengths of 9.2m, 10m and 10.6m, with air suspension introduced in place of the taper leaf used in the original design. The driveline of the step-entrance Dart was retained, although some early examples were fitted with Eaton manual transmission. It was initially offered with the low floor version of the Pointer (which was notable for being wider), replaced by the updated Pointer 2 in 1997. It was also offered with a wide variety of bodies, namely the East Lancs Spryte, UVG Urbanstar (later renamed as the Caetano Compass; replaced by the Nimbus in 1999), the stylish Wright Crusader, Alexander ALX200 (discontinued in 2001 with the formation of Transbus International and being replaced by the Pointer 2), Marshall Capital (developed from the C37; later built by MCV), Caetano Nimbus and MCV Evolution (since 2005 - a further evolution of the Marshall bodywork).

Some Dart SLF buses with Alexander ALX200 body were delivered to North America and sold as Thomas Dennis SLF-series buses.

In 1997, the Dart SPD (Super Pointer Dart) was launched with the length of 11.3m (about the same length as a long Leyland National). It has a more powerful engine and a more heavy duty Allison World Series B300R gearbox, but also with an option of a Voith gearbox too. Originally offered only with the Plaxton Pointer 2 bodywork (hence the 'P' in the name) this larger bus was later offered with other bodywork such as East Lancs, the Alexander ALX200 and a few have also been bodied by Marshall. In 1998, it was accompanied by the MPD (Mini Pointer Dart) at 8.8m long, a model reminiscent of the original 8.5m Darts.

With the move to Euro III emissions in October 2001, the new Cummins ISBe engine was launched, with the 4-cylinder 3.9-litre model being used in all lengths except the 11.3m version, which uses the more powerful 6-cylinder, 5.9-litre version. The Cummins ISBe Euro IV engine became available on the Dart SLF chassis since late 2006.

The Dennis Dart SLF was superseded by the Alexander Dennis Enviro200 Dart in 2007. The last Dennis Dart SLF was delivered to Park Island Transport Company Limited in Hong Kong in March 2008, with registration LU2001.

Narrow width Dart SLF

A further variant of the Dart SLF appeared by 2002, when bus operators in the Channel Islands of Guernsey and then Jersey replaced the majority of their fleets with slightly narrower Darts designed to comply with the islands' vehicle size restrictions, sporting adapted versions of existing East Lancs and Caetano bodies respectively. Further examples have since joined them and small numbers of similar buses have entered service with other operators around the UK. Gibraltar also has a fleet of these narrower buses. The last ones entered service in summer 2007, but Alexander Dennis had not produced a direct replacement by September 2008.


For Dennis Dart:

For Dennis Dart SLF:



BSicon BUS.svg Buses portal

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Dennis Dart — mit Dartline Aufbau von Duple Der Dennis Dart ist ein heckmotorgetriebener Midibus des englischen Herstellers Dennis Brothers. Während der achtzehnjährigen Produktionszeit wurden über 11.000 Busse gebaut. Der Name Dart wurde von Dennis bereits in …   Deutsch Wikipedia

  • Dennis Brothers — Limited Dennis ist ein ehemaliger britischer Hersteller von Automobilen und Lastkraftwagen. Inhaltsverzeichnis 1 Unternehmensgeschichte …   Deutsch Wikipedia

  • Dennis Domino — Manufacturer Hestair Dennis Built at Guildford, England Specifications Floor type Step entrance …   Wikipedia

  • Dennis Specialist Vehicles — Праворульный автобус на шасси Dennis Dennis Specialist Vehicles  английская автомобильная фирма, производящая автобусы с первых лет ХХ века. В 80 е годы Dennis разделилась на две самостоятельные компании, одна из которых продолжает… …   Википедия

  • Dart — Contents 1 Dart 2 Darts 3 DART Dart, DART or Darts may refer to: Dart …   Wikipedia

  • Dennis Domino — Der Dennis Domino war ein Midibus des britischen Herstellers Dennis Brothers. Er wurde von 1984 bis 1985 in einer Stückzahl von lediglich 34 Exemplaren gebaut. Beim Domino handelt es sich prinzipiell um eine verkleinerte Variante des Chassis des… …   Deutsch Wikipedia

  • Dennis Trident 2 — A Dennis Trident 2 with Plaxton President body. Manufacturer Dennis /TransBus/Alexander Dennis Built at Guil …   Wikipedia

  • Dennis Trident 3 — KMB s 12m Trident 3 (ATR7) with Alexander ALX500 body. Manufacturer Dennis /TransBus International (badged as Dennis) …   Wikipedia

  • Dennis Javelin — A Safeguard Coaches Dennis Javelin Manufacturer Dennis/TransBus/Alexander Dennis Built at …   Wikipedia

  • Dennis R-Series — Manufacturer Dennis Specifications Floor type step entrance Options Various customer options The Dennis R Series is a rear engined c …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”