- Rosendale cement
-
Seal of the New York and Rosendale Cement Company.
Rosendale cement refers to a type of natural cement produced in and around Rosendale, New York from argilaceous limestone. The fast-setting Rosendale natural cement mortars proved to be more efficient than the traditional mortars based on lime and sand. Because of its reputation, "Rosendale Cement" has also been used as a generic term to refer to natural hydraulic cement produced elsewhere. It was used in the construction of many of the United States most important landmarks, including the Brooklyn Bridge, the pedestal of the Statue of Liberty, Federal Hall, and one of the wings of the United States Capitol building.
Natural cement is produced in a simple process that begins with the calcination of crushed carbonate sedimentary rocks in kilns. The resulting clinker is ground into a fine powder before being shipped to market. Historically, this natural cement product was packaged in paper-lined wooden barrels or heavy canvas bags. Rosendale natural cement was produced from dolostone extracted from the Rosendale and Whiteport members of the Late Silurian Rondout Formation. The natural levels of magnesium and clay in the dolostone from the Rondout Formation are ideally suited for cement production and required none of the chemical additives characteristic of modern Portland cement production.
While Rosendale cement was extremely popular for the foundation of buildings (e.g. Statue of Liberty, Capitol Building, Brooklyn Bridge) and lining of water pipes, its long curing time of at least one month made it unpopular after World War I in the construction of highways and bridges, and many states and construction firms turned to the use of Portland cement. Because of the switch to Portland cement, by the end of the 1920s only one of the 15 Rosendale cement companies had survived. But in the early 1930s it was soon discovered that Portland cement, while it had a faster curing time, was not as durable, especially for highways, to the point that some states stopped building highways and roads with cement. An engineer, Bertrain H. Wait, whose company had worked on the construction of the New York Cities Catskill Aqueduct, and was impressed with the durability of Rosendale cement, came up with a blend of both Rosendale and synthetic cements which had the good attributes of both: i.e. was highly durable and had a much faster curing time. Mr. Wait convinced the New York Commissioner of Highways to construct an experimental section of highway near New Paltz, New York, of one sack of Rosendale to six sacks of synthetic cement. It proved a success, and for decades hence the Rosendale-synthetic cement blend became common use in highway and bridge construction.[1]
Many of the original cement plants in the Rosendale area are preserved in the Snyder Estate Natural Cement Historic District.
References
External links
Categories:
Wikimedia Foundation. 2010.
