Shock Pulse Method

Shock Pulse Method

Shock Pulse Method, also know as SPM, is a patented technique for using signals from rotating rolling bearings as the basis for efficient condition monitoring of machines. From the innovation of the method in 1969 it has now been further developed and broadened and is now a worldwide accepted philosophy for condition monitoring of rolling bearings and machine maintenance.

Difference between shock pulse and vibration

Consider a metal ball hitting a metal bar. At the moment of impact, a pressure wave spreads through the material of both bodies (1). The wave is transient (quickly dampens out). When the wave front hits the shock pulse transducer, it will cause a dampened oscillation of the transducer's reference mass. The peak amplitude is a function of the impact velocity (v).

During the next phase of the collision, both bodies start to vibrate (2). The frequency of this vibration is a function of the mass and the shape of the colliding bodies.

Processing shock pulse signals

A shock pulse transducer reacts with a large amplitude oscillation to the weak shock pulses, because it is excited at its resonance frequency of 32 kHz. Machine vibration, of a much lower frequency, is filtered out.

The first frame shows the symbol for a transducer and, below, the vibration signal from the machine, with superimposed transients at the resonance frequency, caused by shock pulses. The second frame shows the electric filter which passes a train of transients at 32 kHz. Their amplitudes depend on the energy of the shock pulses. The transients are converted into analogue electric pulses. The last frame shows the converted shock pulse signal from the bearing, now consisting of a rapid sequence of stronger and weaker electric pulses.

Shock pulse patterns

The filtered transducer signal reflects the pressure variation in the rolling interface of the bearing.When the oil film in the bearing is thick, the shock pulse level is low, without distinctive peaks.The level increases when the oil film is reduced, but there are still no distinctive peaks. Damage causes strong pulses at irregular intervals.

Measuring Operating Condition

The Shock Pulse meters measure the shock signal on a decibel scale, at two levels. A micro processor evaluates the signal. It needs input data defining the bearing type (ISO number) and the rolling velocity (RPM and bearing diameter).

Surface damages in a bearings causes a large increase in shock pulse strength, combined with a marked change in the characteristics between stronger and weaker pulses. Shock values are thus immediately translated into measurements of relative oil film thickness or surface damage, whichever applies.

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Shock (mechanics) — A mechanical or physical shock is a sudden acceleration or deceleration caused, for example, by impact, drop, kick, earthquake, or explosion. Shock is a transient physical excitation.Shock is usually measured by an accelerometer. This describes a …   Wikipedia

  • Shock collar — The term shock collar is used to describe an electronic training aid developed to deliver an electrical signal through contact points attached to a dog collar. While similar systems are available for other animals, the most common are the collars …   Wikipedia

  • Nuclear pulse propulsion — An artist s conception of the Project Orion basic spacecraft, powered by nuclear pulse propulsion. Nuclear pulse propulsion (or External Pulsed Plasma Propulsion, as it is termed in one recent NASA document[1]) is a proposed method of spacecraft… …   Wikipedia

  • SPM — may refer to:* Statistical parametric mapping, a method for analysing data from functional neuroimaging studies * South Park Mexican, aka SPM, (rapper) real name Carlos Coy. * The city of San Pedro de Macoris, in The Dominican Republic * The ISO… …   Wikipedia

  • cardiovascular disease — Introduction       any of the diseases, whether congenital or acquired, of the heart and blood vessels (blood vessel). Among the most important are atherosclerosis, rheumatic heart disease, and vascular inflammation. Cardiovascular diseases are a …   Universalium

  • Atmospheric reentry — refers to the movement of human made or natural objects as they enter the atmosphere of a planet from outer space, in the case of Earth from an altitude above the edge of space. This article primarily addresses the process of controlled reentry… …   Wikipedia

  • medicine, history of — Introduction  the development of the prevention and treatment of disease from prehistoric and ancient times to the 20th century. Medicine and surgery before 1800 Primitive (primitive culture) medicine and folklore       Unwritten history is not… …   Universalium

  • Blood pressure — For information about high blood pressure, see Hypertension. Blood pressure Diagnostics A sphygmomanometer, a device used for measuring arterial pressure. MeSH …   Wikipedia

  • Physical Sciences — ▪ 2009 Introduction Scientists discovered a new family of superconducting materials and obtained unique images of individual hydrogen atoms and of a multiple exoplanet system. Europe completed the Large Hadron Collider, and China and India took… …   Universalium

  • Tesla coil — at Questacon the National Science and Technology center in Canberra, Australia Uses Application in educational demonstrations, novelty lighting, as well as music Inventor …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”