- Huot automatic rifle
Infobox Weapon
name=Huot automatic rifle
caption=
origin=flag|Canada|1921
type=Automatic Rifle
is_ranged=yes
service=
used_by=Canadian Army
wars=
designer=Joseph Alphonse Huot
design_date=1916
manufacturer=
production_date=1916
number=4
variants=
weight= 13 lbs (5.9 kg) (empty), 19 lbs (8.6 kg) (loaded)
length= 47 inches (119 cm)
part_length=25 in (63.5 cm)
crew=
cartridge=.303 British
caliber= .303 (7.7mm)
action=gas
rate= 475 rpm (cyclic), 155 rpm (continuous)
velocity=
range=
max_range=
feed= 25-round drum magazine
sights=ironThe Huot was a Canadian
World War I light machine gun project.Design and development
In 1916, the
Canadian Expeditionary Force was desperately short of light machine guns. [Fitzsimons, Bernard, ed. "Illustrated Encyclopedia of 20th Century Weapons and Warfare" (London: Phoebus, 1978), Volume 13, p.1385, "Huot". ] Since theRoss rifle had finally been taken out of service, there were large numbers of surplus rifles.That year, Joseph Huot, an engineer from
Richmond, Quebec , [Phillips, Roger F. "The Ross Rifle Story" (Sydney, NS: James A. Chadwick, 1984), p.354.] adapted the Ross' straight-pullbolt action . His sample model, which shared 33 parts with the Ross Mark III, [Phillips, p.355.] had agas piston parallel to the barrel, which moved a sleeve on the bolt backward, operating the action. To absorb excess energy, the bolt was buffered. The entire mechanism was sheathed in sheet metal. Huot copied the cooling system from theLewis Gun , then standard inBritish Army service. [Phillips, p.354.] It fed from a 25-round drum magazine. He filed Canadianpatent s; #193724 on8 March 1917 (granted4 November 1919 ) and #193725 on13 November 1917. [Phillips, p.354.]Early in September 1916, he approached the government to licence-produce the weapon, meeting with a Colonel Matyche on
8 September , [Phillips, p.354.] and was hired by theGovernment Small Arms Experimental Department . [Phillips, p.354.]The
Dominion Rifle Factory (formerly the Ross rifle factory) [Phillips, p.354.] built a finished version of the design, under the supervision of Assistant Inspector of Small Arms MajorRobert Mills of theSeaforth Highlanders . It was tested at Quebec City on12 November 1916 , with a second 650-round [Phillips, p.354.] trial of an improved version on15 February 1917 . [Phillips, p.354.] The Master-General of Ordnance, Blair, demanded a third test, firing 11,000 rounds (half Dominion Cartridge Company, halfDominion Arsenal ) on 5-6 March 1917 . [Phillips, p.354.] The Huot was also examined at theRockcliffe Rifle Range on22 October 1917 , which led S. C. Meuburn to recommend it be adopted by the British Army. [Phillips, p.355.]To further this aim, Blair, A.A. Janson, and Huot sailed for Britain, arriving at
Sandling , Hythe on10 January 1918 , for an extensive British trial at the arms testing establishment at RSAF Enfield. This took place between 19-21 March 1918 , and the Huot competed against the Lewis, Hotchkiss, and Farquhar-Hill. The results appeared favorable. "The Huot did better in some tests than the Lewis. It was superior in snapshooting from a trench, in quickness of getting into action..." [Phillips, p.355.] Even muddy, after firing four or five clearing rounds, [Phillips, p.355.] it would function again, without the need for stripping and cleaning; [Phillips, p.362.] Blair noted it was the only weapon on the trial able to suffer immersion and do so.In firing 10,000 rounds through the Huot, Enfield uncovered fouling of the gas cylinder at 4,000 rounds, and the barrel worn out at 10,000. [Phillips, p.355.] Since this example had already had some 11,000 rounds fired through it before coming into Enfield's hands, this is understandable. Using all varieties of Mark VII ammunition it would be likely to encounter (including K, KN, J, and US), they found the Huot had no major problems, though there were unexplained stoppages, and it did not require the specially-chosen ammunition the Lewis did. [Phillips, p.355.] Furthermore, the Huot proved able to fire 4,000 rounds without oiling or cleaning; which the Lewis was unable to do. [Phillips, p.363.]
In a
22 October 1917 letter to the BritishMinister of Munitions , Blair said tooling existed in Canada and the Dominion Factory was ready to begin manufacturing the Huot, using parts from Rosses scheduled for scrapping. [Phillips, p.355.] After exposure to it in France, Lieutenant-GeneralArthur Currie , commanding theCanadian Corps , reported every soldier to come in contact with the Huot liked it, and on1 October 1918 wrote requesting 5,000 be purchased, arguing casualties required increased firepower for each remaining man, [Phillips, p.362.] as well as to allow his men to answer the growing number of German light machine guns. [Phillips, p.362.] It was ugly, but at C$50, considerably cheaper than the original C$1,000 cost of the Lewis. [Phillips, p.355: citing Public Archives of Canada, Record Group 24.]One drawback was the Huot was
fully-automatic only, with no provision for semi-automatic fire. The magazine could be emptied in just 3.2 seconds [Phillips, p.364] (a drawback shared by theBrowning Automatic Rifle ), but it could be changed in four seconds, and an empty magazine filled with ammunition in 30 seconds. [Phillips, p.355.] In addition the Huot functioned just as well upside-down. [Phillips, p.364.]Enfield noted 13 flaws, all with simple fixes, [Phillips, p.355.] remarking "converting the Ross was not a complicated matter." [Phillips, p.355.] Field trials in France showed "well authenticated" reports of few breakages or stoppages. [Phillips, p.362.]
Enfield recommended a number of changes: the barrel cover be fitted with a continuous length of tubing and a wooden
forend , allowing the weapon to dispense with the rest, which was criticized for its fragility; a corrugated metal cover be fitted to the body, with adust shield over the bolt handle; the magazine mouth be bevelled to ease feeding; the magazine be made of thinner metal to reduce its excessive weight; the breech cover not extend so far back to prevent injury to the firer; strengthen the extractor to prevent failures to feed with thick-rimmed cases (one of the few feeding problems noted); the hand-cocking lever be deleted, also removing eight new parts; and the barrel casing be made in one piece, to eliminate a minor double failure issue. [Phillips, p.363-5.]The war ended before it entered service, and the idea was dropped. Huot was out of pocket about C$30,000. [Phillips, p.368.] Hundreds of surplus Ross rifles were provided to Britain early in World War Two [Fitzsimons, Volume 20, p.2223, "Ross".] which could easily have been converted to Huots.
Notes
References
*Fitzsimons, Bernard, ed. "Illustrated Encyclopedia of 20th Century Weapons and Warfare", Volume 13, p.1385, "Huot". London: Phoebus Publishing, 1978.
*Phillips, Roger F. "The Ross Rifle Story". Sydney, NS: James A. Chadwick, 1984.ee also
*
Kg/1940 Light machine gun
*Furrer M25
*Mendoza RM2
*Charlton machine gun
*Bren gun
Wikimedia Foundation. 2010.