Slow sand filter

Slow sand filter

Slow sand filters are used in water purification for treating raw water to produce a potable product. They are typically 1 to 2 metres deep, can be rectangular or cylindrical in cross section and are used primarily to treat surface water. The length and breadth of the tanks are determined by the flow rate desired by the filters, which typically have a loading rate of 0.1 to 0.2 metres per hour (or cubic metres per square metre per hour). Although they are often the preferred technology in many developing countries they are also used to treat water in some of the most developed countries such as the UK where they are used to treat water supplied to London.


Slow sand filters have a number of unique qualities:
# Unlike other filtration methods, slow sand filters use biological processes to clean the water, and are nonpressurized systems. Slow sand filters do not require chemicals or electricity to operate.
# Cleaning is traditionally by use of a mechanical scraper, which is usually driven into the filter bed once it has been dried out. However, some slow sand filter operators use a method called "wet harrowing", where the sand is scraped while still under water, and the water used for cleaning is drained to waste;
# For municipal systems there usually is a certain degree of redundancy, it is desirable for the maximum required throughput of water to be achievable with one or more beds out of service;
# Slow sand filters require relatively low turbidity levels to operate efficiently. In summer conditions and in conditions when the raw water is turbid, blinding of the filters occurs more quickly and pre-treatment is recommended.
#Unlike other water filtration technologies that produce water on demand, slow sand filters produce water at a slow, constant flow rate and are usually used in conjunction with a storage tank for peak usage. This slow rate is necessary for healthy development of the biological processes in the filter.

While many municipal water treatment works will have 12 or more beds in use at any one time, smaller communities or households may only have one or two filter beds.

In the base of each bed is a series of herringbone drains that are covered with a layer of pebbles which in turn is covered with coarse gravel. Further layers of sand are placed on top followed by a thick layer of fine sand. The whole depth of filter material may be more than 1 metre in depth, the majority of which will be fine sand material. On top of the sand bed sits a supernatant layer of raw, unfiltered water.

How it works

Slow sand filters work through the formation of a gelatinous layer (or biofilm) called the hypogeal layer or "Schmutzdecke" in the top few millimetres of the fine sand layer. The "Schmutzdecke" is formed in the first 10-20 days of operationCentre for Affordable Water and Sanitation Technology, Biosand Filter Manual: Design, Construction, & Installation," July 2007.] and consists of bacteria, fungi, protozoa, rotifera and a range of aquatic insect larvae. As a "Schmutzdecke" ages, more algae tend to develop and larger aquatic organisms may be present including some bryozoa, snails and Annelid worms. The "Schmutzdecke" is the layer that provides the effective purification in potable water treatment, the underlying sand providing the support medium for this biological treatment layer. As water passes through the "Schmutzdecke", particles of foreign matter are trapped in the mucilaginous matrix and dissolved organic material is adsorbed and metabolised by the bacteria, fungi and protozoa. The water produced from a well-managed slow sand filter can be of exceptionally good quality with 90-99% bacterial reduction.National Drinking Water Clearinghouse, [ "Slow Sand Filtration,"] Tech Brief Fourteen, June 2000.]

Slow sand filters slowly lose their performance as the "Schmutzdecke" grows and thereby reduces the rate of flow through the filter. Eventually it is necessary to refurbish the filter. Two methods are commonly used to do this. In the first, the top few millimetres of fine sand is scraped off to expose a new layer of clean sand. Water is then decanted back into the filter and re-circulated for a few hours to allow a new "Schmutzdecke" to develop. The filter is then filled to full depth and brought back into service. ] The second method, sometimes called wet harrowing, involves lowering the water level to just above the "Schmutzdecke", stirring the sand and thereby suspending any solids held in that layer and then running the water to waste. The filter is then filled to full depth and brought back into service. Wet harrowing can allow the filter to be brought back into service more quickly. ]


*As they require little or no mechanical power, chemicals or replaceable parts, and they require minimal operator training and only periodic maintenance, they are often an appropriate technology for poor and isolated areas.
*Slow sand filters, due to their simple design, may be created diy. DIY-slow sand filters have been used in Afghanistan and other countries to aid the poor. [ [ DIY slow sand filter] ]
*Slow sand filters are recognized by the World Health Organization [] , Oxfam, United Nations [] and the United States Environmental Protection Agency [] as being superior technology for the treatment of surface water sources. According to the World Health Organization, "Under suitable circumstances, slow sand filtration may be not only the cheapest and simplest but also the most efficient method of water treatment."

See also

*Bank filtration, a similar concept, but passing river or lake water through a section of natural bank (often many meters)


*cite web | last = | first = | authorlink = | coauthors = | title = Learn More: Water (slow sand filter) | work = Refugee Camp Project - | publisher = Doctors Without Borders | date = | url = | format = | doi = | accessdate = 2007-03-27
* [ "Slow Sand Filtration"] , World Health Organization, 1974 ISBN 92-4-154037-0
* [ "UN High Commisioner for Refugees (UNHCR) Water Manual for Refugee Situations"] , Geneva, November 1992. Slow sand filters recommendations listed on page 38.
* [ "Small System Compliance Technology List for The Surface Water Treatment Rule"] , United States Environmental Protection Agency, EPA 815-R-97-002 August 1997. Slow sand filtration is listed on page 24.
* Descriptive content, academic papers, and good links.
* Links to academic papers and international slow sand filtration standards, further explanations of how slow sand filtration works.
* [ "Home-made biological filter"]
* Modelling slow sand filters - PhD Thesis, Luiza Campos, Imperial College, 2002. PDF in 5 parts: [ Part 1] : [ Part 2] : [ Part 3] : [ Part 4] : [ Part 5]

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • slow sand filter — A bed of sand through which water slowly flows; the gelatinous microbial layer on the sand grain surface removes waterborne microorganisms, particularly Giardia, by adhesion to the gel. This type of filter is used in some water purification… …   Dictionary of microbiology

  • Sand filter — Sand filters are used for water purification. There are three main types; # rapid (gravity) sand filters # upflow sand filters # slow sand filters All three methods are used extensively in the water industry throughout the world. The first two… …   Wikipedia

  • Rapid sand filter — The rapid sand filter or rapid gravity filter is a type of filter used in water purification and is commonly used in municipal water treatment facilities. Rapid sand filters use relatively coarse sand and other granular media to remove particles… …   Wikipedia

  • Filter (chemistry) — In domestic food and drink preparation where bulk solids are removed from liquids, this is often called a strainer. Filtrate is the liquid produced after filtering a suspension of a solid in a liquid.Filtrand (or Residue) is the solid residue… …   Wikipedia

  • Media filter — Peat Sand Filter in United States. The filter treats stormwater runoff from a residential area. Stormwater from streets is first routed to a small detention basin (rear of photo, behind berm), which removes coarse sediment. After filtration an… …   Wikipedia

  • Water filter — A water filter is a device which removes impurities from water by means of a fine physical barrier, chemical process and/or biological process. Filters are used to cleanse water for irrigation, drinking water, aquariums, and swimming pools.… …   Wikipedia

  • McMillan Sand Filtration Site — The District of Columbia government is considering redevelopment plans for the McMillan Park and sand filtration site which is no longer used for water treatment. McMillan Park and Sand Filtration Site is a twenty five acre green space and… …   Wikipedia

  • filter — filterer, n. /fil teuhr/, n. 1. any substance, as cloth, paper, porous porcelain, or a layer of charcoal or sand, through which liquid or gas is passed to remove suspended impurities or to recover solids. 2. any device, as a tank or tube,… …   Universalium

  • BioSand Filter — BioSand Water Filters are a technological adaptation of the centuries old slow sand filtration process. While implementations exist in many different sizes and varieties, the most common design is intended for use in rural homes where naturally… …   Wikipedia

  • Lava filter — A lava filter is a biological filter that uses lavastone pebbles as support material on which microorganisms can grow in a thin biofilm. [ [http://www.stowa Overview of lavafilters] ] This… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”