Intersymbol Interference in digital communication

Intersymbol Interference in digital communication

Inter Symbol Interference(ISI) is the special case of interference in digital transmission, when the interference is occurred within the system itself. "ISI"is the effect of all other transmitted bits on decoding of m-th received bits.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Digital signal — Main article: Signal (electronics) A digital signal is a physical signal that is a representation of a sequence of discrete values (a quantified discrete time signal), for example of an arbitrary bit stream, or of a digitized (sampled and analog… …   Wikipedia

  • Orthogonal frequency-division multiplexing — Passband modulation v · d · e Analog modulation AM · …   Wikipedia

  • Pulse shaping — In digital telecommunication, pulse shaping is the process of changing the waveform of transmitted pulses. Its purpose is to make the transmitted signal suit better to the communication channel by limiting the effective bandwidth of the… …   Wikipedia

  • telecommunications media — Introduction       equipment and systems metal wire, terrestrial and satellite radio, and optical fibre employed in the transmission of electromagnetic signals. Transmission media and the problem of signal degradation       Every… …   Universalium

  • Channel (communications) — Old telephone wires are a challenging communications channel for modern digital communications. In telecommunications and computer networking, a communication channel, or channel, refers either to a physical transmission medium such as a wire, or …   Wikipedia

  • Nyquist ISI criterion — Raised cosine response meets the Nyquist ISI criterion. Consecutive raised cosine impulses demonstrate the zero ISI property between transmitted symbols at the sampling instants. At t=0 the middle pulse is at its maximum and the sum of other… …   Wikipedia

  • Spectral efficiency — Spectral efficiency, spectrum efficiency or bandwidth efficiency refers to the information rate that can be transmitted over a given bandwidth in a specific communication system. It is a measure of how efficiently a limited frequency spectrum is… …   Wikipedia

  • Fading — This article is about signal loss in telecommunications. For the poetry book, see Fading (book). For other uses, see Fade (disambiguation). Frequency selective time varying fading causes a cloudy pattern to appear on a spectrogram. Time is shown… …   Wikipedia

  • Multipath propagation — This article is about the electromagnetic propagation phenomenon. For the computing storage term, see Multipath I/O. For the routing term, see Multipath Routing. In wireless telecommunications, multipath is the propagation phenomenon that results …   Wikipedia

  • Jitter — For other meanings of this word, see Jitter (disambiguation). Jitter is the undesired deviation from true periodicity of an assumed periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”