8x68mm S

Infobox Firearm Cartridge
name=8x68mm S


caption=8x68mm S (3rd from the left) amongst other rifle cartridges
origin=flagcountry|Nazi Germany
type=Rifle
service=Never issued
used_by=
wars=
designer=August Schüler
design_date=1939
manufacturer=
production_date=1939 - present
number=
variants=8x68mm RS (rimmed)
is_SI_specs=yes
case_type=Rimless, bottleneck
bullet=8.20
neck=9.14
shoulder=12.15
base=13.30
rim_dia=13.00
rim_thick=1.40
case_length=67.50
length=87.00
case_capacity=5.58
rifling= 280 mm (1 in 11.02 in)
primer=Large rifle magnum
max_pressure=440
max_cup=
is_SI_ballistics=yes
bwunit=gram
bw1=11.7
btype1=RWS DK
vel1=945
en1=5224
bw2=11.7
btype2=RWS KS
vel2=990
en2=5734
bw3=12.1
btype3=RWS HMK
vel3=970
en3=5692
bw4=13.0
btype4=RWS EVO
vel4=915
en4=5442
bw5=14.5
btype5=RWS KS
vel5=870
en5=5488
test_barrel_length=650 mm (25.6 in)
balsrc= RWS / RUAG Ammotech [ [http://www.rws-munition.de/en/rifle_cartridges/ballistic_data.htm?navid=10 RWS Ammunition Ballistic Data & Application Consultant] ] The 8x68mm S rimless bottlenecked rifle cartridge (the S means it is intended for 8.2 mm (.323 in) groove diameter bullets) and its necked down sister cartridge the 6.5x68mm (no S or anything else required) were developed in the 1930s by "Mr. Schüler" from the "August Schüler Waffenfabrik, Suhl, Germany" as magnum hunting cartridges that would just fit and function in standard sized Mauser 98 bolt action rifles. This is one of the early examples where a de novo rifle cartridge (the 8x68mm S and 6.5x68mm have no other cartridge as parent case) was developed by a gunsmith to fit a specific popular and widespread type of rifle.

History

The German ammunition manufacturer [http://www.rws-munition.de/en/rws_ruag/rws_ruag.htm RWS] (Rheinisch-Westfälischen Sprengstoff factories) introduced both cartridges commercially in the spring of 1939. With the official certification of the .375 Hölderlin this German 68 mm "family" of magnum rifle cartridges that all share the same basic cartridge case got expanded 68 years later.

The cartridges in this German 68 mm cartridge "family" are, in the order of development:
* 8x68mm S (1939)
* 6.5x68mm (1939)
* .375 Hölderlin (2007)

Standard military 7.92x57mm Mauser 98(k) rifles have to be adapted by a competent gunsmith to function properly with these magnum cartridges since they are longer and the cases have a larger diameter then 7.92x57mm Mauser cartridges. The 7.92x57mm Mauser cartridge is also known as the 8 mm Mauser or in Germany as the 8x57mm IS (IS stands for "Infantrie Spitz"). In adapted standard military Mauser 98k rifles the large 8x68mm S cartridges are however praised for very smooth and reliable feeding.

The widespread availability of standard size Mauser 98 rifles and the fact that the .375 H&H Magnum cartridge and its necked down version the .300 H&H Magnum with approximately 72.4 mm case length were too long to fit in standard sized Mauser 98 bolt action rifles makes the shorter 8x68mm S, 6.5x68mm and .375 Hölderlin interesting chambering options.

World War II spoiled the commercial introduction and spread of the 8x68mm S amongst German hunters. The cartridge became due to its high performance and flat trajectory popular after World War II when German hunters were allowed again to own and hunt with full bore rifles. The 8x68mm S performance also made that hunters who had problems with handling magnum cartridge recoil stepped down to less powerful but for German conditions adequate medium cartridges like the 7.92x57 mm Mauser, 7x64mm (Brenneke) or .30-06 Springfield (also know as the 7.62x63mm in metric countries). Recoil sensitive shooters can fit an efficient muzzle brake to significantly reduce the amount of recoil. With the help of a muzzle brake the 8x68mm S recoil is reduced to tolerable levels.

Cartridge dimensions

Extremely thick brass results in 'only' 5.58 ml (86 grains) H₂O cartridge case capacity for the 8x68mm S. A rare feature of this German rimless bottlenecked centerfire cartridge design is that it has a slightly rebated rim (P1 - R1 = 0.3 mm). A sign of the era in which the 8x68mm S was developed are the gently sloped shoulders. The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt action rifles, under extreme conditions.

8x68mm S maximum C.I.P. cartridge dimensions. All sizes in millimetres (mm).

Americans would define the shoulder angle at alpha/2 ≈ 14.53 degrees. The common rifling twist rate for this cartridge is 280 mm (1 in 11.02 in), 4 grooves, Ø lands = 7.89 mm, Ø grooves = 8.20 mm, land width = 4.40 mm and the primer type is large rifle magnum.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) guidelines the 8x68mm S case can handle up to 440 MPa (63817 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.

The American .325 WSM cartridge introduced in 2005 is probably the closest ballistic twin of the 8x68mm S. The .325 WSM is considerably shorter and fatter and has a more radical rebated rim (P1 -R 1 = 0.51 mm), much steeper shoulder angle (70 degrees / 35 degrees for Americans) and a shorter neck (7.82 mm). This makes the 8x68mm S case with its 9.11 mm long neck better suited for loading long heavier bullets and due to its sleeker exterior shape bound to cycle more reliable in bolt action rifles in extreme situations.

The 8x68mm S in field use

German big game hunters often use 8x68mm S rifles in Africa for hunting plains game, where American hunters would choose one of the .30 or .338 magnum cartridges. The 8x68mm S as a pure civil cartridge can be used in countries which ban civil use of former or current military ammunition.

Since there are not much factory loads available ( [http://www.rws-munition.de/en/rws_ruag/rws_ruag.htm RWS] currently (2007) offers 5 factory loads) and due to its good field reputation and efficiency, the 8x68mm S is often used by reloaders. They have used this cartridge extensively to create powerful loads by handloading. Whilst staying within the 440 MPa C.I.P. limit a 8x68mm S rifle with a 650 mm (25.59 in) long barrel and appropriate modern gun propellants (Vihtavuori N560) can be handloaded to propel a 12.96 gram (200 gr) 8 mm bullet like the Sierra MatchKing to a muzzle velocity of 927 m/s (3042 ft/s).

The 8x68mm S has a good long range accuracy reputation i.e. it is not hard to develop or find loads that will shoot 1 MoA or better out of decent standard mass produced rifles. Factory 8x68mm S rifles often have a 650 mm or 26 in barrel with a 280 mm (1 in 11 in) twist rate, which works well in daily life. This twist rate was chosen since the bullet jackets used in the 1930s were not strong enough to cope with the forces generated by the magnum muzzle velocities of the 8x68mm S. The 240 mm (1 in 9.45 in) twist rate normally fond in the 7.92x57mm Mauser makes the 8x68mm S combined with modern bullets with jackets designed for magnum cartridges an awesome long range cartridge.

Reloaders use the 8x68mm S as a Jack of all trades cartridge on all European game from fox, roe deer and chamois upwards to the big European game like red deer, moose and brown bear. These people realized that bullets with different characteristics can be utilized to produce varying effects on game. They also realized that from 8 mm caliber upwards the rise of sectional density and penetrating capability of practical spin stabilized rifle bullets (bullets up to 5 to 5.5 calibers in length) tends to flatten out [http://www.lima-wiederladetechnik.de/PDF/Kneubuehl.pdf] .

This means that loaded with light, short and soft nosed 8 mm bullets the 8x68mm S can be used on remarkable small game. Loaded with heavy, long and hard (solid copper alloy) bullets the 8x68mm S offers enough speed derived power to penetrate heavy and dangerous game. The 8x68mm S is suitable for hunting almost any game animal on the planet, though certain sub-Saharan Africa countries have a 9.53 mm (.375 in) minimum caliber rule for hunting Big Five game - i.e. leopard, lion, cape buffalo, rhino and elephant. In the Central African Republic, where there are no ammunition limits for hunting Big Five game, the 8x68mm S is used successfully for hunting elephant.

8 mm cartridges compared

Maximum muzzle velocity comparison in % of the probably most proliferated European and American 8 mm rifle cartridges out of 650 mm (25.59 in) long barrels loaded with relatively light to heavy 8 mm bullets to their C.I.P. or SAAMI (Sporting Arms and Ammunition Manufacturers’ Institute) sanctioned maximum pressures.

This comparison is not totally objective since the 8 mm Remington Magnum and .325 WSM operate at 448.16 MPa (65000 psi), the 8x68mm S at 440 MPa (58740 psi), the 8x64mm S at 405 MPa (58740 psi) and the 7.92x57mm Mauser at 390 MPa (56564 psi) maximum chamber pressure. Higher chamber pressure results in higher muzzle velocities.

The 8x68mm S as parent case

The .375 Hölderlin

The 8x68mm S case has functioned as the parent case for the .375 Hölderlin (9.5x68mm), which is essentially a 9.53 mm (.375 caliber) necked-up version of the 8x68mm S. The wildcat status of the .375 Hölderlin ended in 2007 when it got C.I.P. certified and became an officially registered and sanctioned member of the German 68 mm "family" of magnum rifle cartridges. If the .375 Hölderlin will become available as factory ammunition, like the older cartridge "family" members (8x68mm S and 6.5x68mm), is still unknown.

.375 Hölderlin maximum C.I.P. cartridge dimensions. All sizes in millimetres (mm).

Americans would define the shoulder angle at alpha/2 ≈ 14.53 degrees. The common rifling twist rate for this cartridge is 305 mm (1 in 12 in), 6 grooves, Ø lands = 9.30 mm, Ø grooves = 9.55 mm, land width = 2.92 mm and the primer type is large rifle magnum.

The .375 Hölderlin has 5.65 ml (87 grains) H₂O cartridge case capacity. According to the official C.I.P. guidelines the .375 Hölderlin case can handle up to 440 MPa (63,816 psi) piezo pressure.

According to the creator of the .375 Hölderlin, Mr. C. Otterbein, the idea behind the .375 Hölderlin was to develop a big game cartridge based on a German cartridge case for standard sized Mauser 98 bolt action rifles. The ballistic performance had to be close to or equal the performance of the .375 Holland & Holland Magnum. The 8x68mm S was chosen as parent case, since it offers enough case capacity and a competent gunsmith can relatively easy rechamber a standard Mauser 98 rifle to accept 8x68mm S based cartridges. To keep costs down and promote an acceptable recoil level blowing out the parent case was renounced.

Wildcats

Cartridges that are not officially registered with nor sanctioned by C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) or its American equivalent, SAAMI (Sporting Arms and Ammunition Manufacturers’ Institute) are generally known as wildcats. By blowing out standard factory cases the wildcatter generally hopes to gain extra muzzle velocity by increasing the case capacity of the factory parent cartridge case by a few percent. Practically there can be some muzzle velocity gained by this method, but the measured results between parent cartridges and their 'improved' wildcat offspring is often marginal. Besides changing the shape and internal volume of the parent cartridge case, wildcatters also can change the original caliber. A reason to change the original caliber can be to comply with a minimal permitted caliber or bullet weight for the legal hunting of certain species of game.

Wildcats are not governed by C.I.P. or SAAMI rules so wildcatters can capitalize the achievable high operating pressures. It is often reported that modern 68 mm RWS brass can tolerate up to 500 MPa (72519 psi) piezo pressure. Because the 8x68mm S offers an exceptional sturdy, pressure resistant cartridge case that can relatively easily be reloaded with primers, powder and bullets and hence be reused several times it has become quite popular amongst wildcatters. With the 8x68mm S as the parent case wildcatters have created .25x68, .270x68, 7x68mm, .30x68, .338x68, .375x68 or .416x68 variants. Improved or blown out 68 mm cartridge designs are reported to come performance wise close to the 8 mm Remington Magnum which has about 14% more case capacity then the standard 8x68mm S.

Examples of 8x68mm S based wildcats are the relatively well known American 7 mm and .30 caliber Boo Boo and 7 mm and .30 HV wildcats. The Boo Boo wildcats were developed for long range target shooting where participants usually handload their ammunition. Several 1,000 yard shooting competitions have been won with Boo Boo wildcats. A wildcat from Europe that uses the 8x68mm S as its parent case is the .30 Kovacs [ [http://www.reloadersnest.com/frontpage.asp?CaliberID=338 .30 Kovacs at reloadersnest.com] ] . It was designed in 1996 by Stefan Kovács, Austria-7041 Wulkaprodersdorf. The .30 Kovacs has much more powder-room (longer L2, wider P2, 40 degree Ackley-shoulder) then its parental case. It falls powder-room-wise between the .300 Winchester Magnum and .300 Weatherby Magnum but has energy and velocity falling between .300 Weatherby Magnum and the .300 Remington Ultra Magnum. This wildcat cartridge will be fitted only by Büchsenmachermeister [http://www.kriebernegg.com Egon Kriebernegg] . Another European wildcat based on the 8x68mm S is the .300 Styria Magnum [ [http://www.reloadersnest.com/frontpage.asp?CaliberID=558 .300 Styria Magnum at reloadersnest.com] ] . It was developed by Ing. Michael W. Mayerl from the [http://www.styriaarms.com Styria Arms company] in Austria in 2005 as a reliable beltless high power cartridge for Mauser 98 rifles. The parent case is shortened to 65 mm (2.559 in) case length and necked down to 7.82 mm (.308 in) calibre. The shoulder angle is the same as the 8x68mm S so fire forming is not necessary and no new headspace gages are needed. The development goal of this cartridge was to get a highly reliable .30-calibre magnum cartridge that fits in the standard Mauser 98 action without any modification of the feeding lips, follower, feeding ramp or magazine length. Only the bolt face must be opened to a diameter of 13.3 mm (0.524 in). The throat of the .300 Styria Magnum is similar to the proven .308 Winchester and short enough to seat the bullets to the lands without exceeding the maximum length of 84.8 mm (3.339 in) to fit the original Mauser 98 magazine. The thick walled 8x68mm S parent case manufactured by RWS can handle a usage piezo pressure up to 460 MPa (66717 psi).

ee also

*List of firearms
*List of rifle cartridges
*8 mm caliber

References

* [http://www.reloadersnest.com/frontpage.asp?CaliberID=226 8x68mm S reloading data at reloadsnest.com]
* C.I.P. CD-ROM edition 2003
* C.I.P. decisions, texts and tables ( [http://www.cip-bp.org/index.php?id=tdcc-telechargement free current C.I.P. CD-ROM version download (ZIP and RAR format)] )

External links

* [http://www.rws-munition.de/en/rws_ruag/rws_ruag.htm RWS / Ruag Ammotec]
* [http://home.snafu.de/l.moeller/Englisch/Muzzle-Brake.htm Recoil reducing muzzle brakes]
* [http://www.lima-wiederladetechnik.de/Englisch/LM-101.htm LM-101 Long Range Bullet for a 8x68mm S High Performance Wildcat Cartridge]
* [http://www.lima-wiederladetechnik.de/Patronen/8x68S.html Lutz Möller's 8x68mm S Page (including images)]
* [http://www.lima-wiederladetechnik.de/Patronen/375-Hoelderlin-Patrone.htm Lutz Möller's .375 Hölderlin Page (including images)]
* [http://www.jww.de/445,249/ Jagen Weltweit, 8x68mm S by Norbert Klups]