Physical Layer

Physical Layer

__NOTOC__The Physical Layer is the first level in the seven-layer OSI model of computer networking. It translates communications requests from the Data Link Layer into hardware-specific operations to affect transmission or reception of electronic signals.

The Physical Layer is a fundamental layer upon which all higher level functions in a network are based. However, due to the plethora of available hardware technologies with widely varying characteristics, this is perhaps the most complex layer in the OSI architecture. The implementation of this layer is often termed PHY.

The Physical Layer defines the means of transmitting raw bits rather than logical data packets over a physical link connecting network nodes. The bit stream may be grouped into code words or symbols and converted to a physical signal that is transmitted over a hardware transmission medium. The Physical Layer provides an electrical, mechanical, and procedural interface to the transmission medium. The shapes of the electrical connectors, which frequencies to broadcast on, which modulation scheme to use and similar low-level parameters are specified here.

Physical signaling sublayer

In a local area network (LAN) or a metropolitan area network (MAN) using open systems interconnection (OSI) architecture, the "physical signaling sublayer" is the portion of the Physical Layer that:
* interfaces with the medium access control sublayer (MAC) which is a part of the Data Link Layer
* performs character encoding, transmission, reception and decoding
* performs mandatory isolation functions.

Source: from Federal Standard 1037C

List of Physical Layer services

The major functions and services performed by the Physical Layer are:
* Bit-by-bit delivery
* Providing a standardized interface to physical transmission media, including
** Mechanical specification of electrical connectors and cables, for example maximum cable length
** Electrical specification of transmission line signal level and impedance
** Radio interface, including electromagnetic spectrum frequency allocation and specification of signal strength, analog bandwidth, etc.
** Specifications for IR over optical fiber or a wireless IR communication link
* Modulation
* Line coding
* Bit synchronization in synchronous serial communication
* Start-stop signalling and flow control in asynchronous serial communication
* Circuit mode multiplexing,fact|date=November 2007 as opposed to statistical multiplexing performed at the higher level
** Establishment and termination of circuit switched connections
* Carrier sense and collision detection utilized by some level 2 multiple access protocols
* Equalization filtering, training sequences, pulse shaping and other signal processing of physical signals
* Forward error correction,fact|date=November 2007 for example bitwise convolutional coding
* Bit-interleaving and other channel coding

The Physical Layer is also concerned with
* Point-to-point, multipoint or point-to-multipoint line configuration
* Physical network topology, for example bus, ring, mesh or star network
* Serial or parallel communication
* Simplex, half duplex or full duplex transmission mode
* Autonegotiation

Physical Layer examples

* V.92 telephone network modems
* IRDA Physical Layer
* USB Physical Layer
* Firewire
* EIA RS-232, EIA-422, EIA-423, RS-449, RS-485
* ITU Recommendations: see ITU-T
* DSL
* ISDN
* T1 and other T-carrier links, and E1 and other E-carrier links
* 10BASE-T, 10BASE2, 10BASE5, 100BASE-TX, 100BASE-FX, 100BASE-T, 1000BASE-T, 1000BASE-SX and other varieties of the Ethernet physical layer
* Varieties of 802.11
* SONET/SDH
* GSM radio interface
* Bluetooth Physical Layer
* IEEE 802.11x Wi-Fi Physical Layers
* Etherloop

Hardware equipment (network node) examples

* Network adapter
* Repeater
* Network hub
* Modem

Relation to TCP/IP model

The TCP/IP model has no equivalent layer that deals exclusively with hardware-level specifications, as this model does not concern itself directly with physical interfaces. It assumes a functioning host operating system with a facility to transmit raw data blocks onto the local network. TCP/IP simply places all hardware specific components of the operating system, as well as interface firmware, etc., into the Link Layer. The TCP/IP model is not a top/down comprehensive design reference for general networks and networking hardware. It was formulated for the purpose of illustrating the design of the suite of internetworking methods used in the Internet Protocol Suite into logical group functions.

ee also

* Ethernet physical layer
* line code

References

*http://www.erg.abdn.ac.uk/users/gorry/course/phy-pages/phy.html
*http://www.tcpipguide.com/free/t_PhysicalLayerLayer1.htm


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Physical Layer —   [engl.], die physikalische Schicht (Bitübertragungsschicht) im OSI Schichtenmodell …   Universal-Lexikon

  • Physical layer — PHY redirects here. For the drug referred to as Phy, see Methadone. The OSI model 7 Application layer 6 Presentation layer 5 Session layer 4 Transport layer 3 …   Wikipedia

  • Physical Layer — Als OSI Modell (auch ISO OSI Schichtmodell, OSI Referenzmodell; engl. Open Systems Interconnection Reference Model) wird ein Schichtenmodell der Internationalen Standardisierungsorganisation (ISO) bezeichnet. Es wurde als Designgrundlage von… …   Deutsch Wikipedia

  • physical layer —    The first and lowest of the seven layers in the OSI Reference Model for computer to computer communications. The physical layer defines the physical, electrical, mechanical, and functional procedures used to connect the equipment.    See also… …   Dictionary of networking

  • physical layer — fizinis lygmuo statusas T sritis informatika apibrėžtis Pirmasis, žemiausias, atvirųjų sistemų ryšio ↑lygmeninio tinklų modelio lygmuo, apibrėžiantis elektrinius ir mechaninius duomenų perdavimo įtaisų (kabelių, jungčių, šakotuvų ir kt.)… …   Enciklopedinis kompiuterijos žodynas

  • Physical Layer Operation Administration & Maintenance — Physical Layer Operation Administration Maintenance Physical Layer Operation Administration Maintenance, (abbrév. PLOAM) Champ d’information, message ou mot de passe utilisé sur la couche physique pour la gestion des fonctions entre ONT et… …   Wikipédia en Français

  • Physical Layer Signaling — ou PLS (signalisation de la couche physique) encore connu sous la dénomination Physical Signaling Sublayer correspond à la partie supérieure de la couche physique dans le modèle OSI de l ISO. PLS assure le couplage fonctionnel et logique entre l… …   Wikipédia en Français

  • Physical Layer Operation Administration & Maintenance — Dans le domaine de l accès à internet, Physical Layer Operation Administration Maintenance (abbrév. PLOAM) est un champ d’information, message ou mot de passe utilisé sur la couche physique pour la gestion des fonctions entre ONT et ONU (Optical… …   Wikipédia en Français

  • physical layer —    The first (lowest) layer in the seven layer OSI reference model of data communications protocols; it is responsible for the electromechanical interface to communications media …   IT glossary of terms, acronyms and abbreviations

  • Physical Layer — physikalische Schicht/Bitübertragungsschicht, verwirklicht das transparente Versenden von Bitstoemen zwischen zwei Systemen über versch. Hardware Medien (entspricht NICHT dem Medium selbst!) …   Acronyms

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”