Bristol 411

Infobox Automobile


name = Bristol 411
manufacturer = Bristol Cars
production = 1969–1976 287 produced
class = Sports sedan
layout=FR layout
engine=6286 cc OHV V8
6556V8
6556 cc OHV V8
predecessor = Bristol 410
successor = Bristol 603 Bristol 412
transmission = 3-speed automaticCite web|url=http://www.carfolio.com/search/results/?terms=Bristol+411|title=Bristol 411|accessdate=2008-01-01|work=carfolio.com]
wheelbase = convert|2896|mm|in|1|abbr=on
length = convert|4902|mm|in|1|abbr=on
width = convert|1727|mm|in|1|abbr=on
height = convert|1460|mm|in|1|abbr=on-convert|1473|mm|in|1|abbr=on
weight = convert|1676|kg|lb|0|abbr=on-convert|1712|kg|lb|0|abbr=on

The Bristol 411 is a car which was built by the British manufacturer Bristol Cars. It was the fifth series of Chrysler V8-engined Bristol models.

With the 411, Bristol, for the first time since the 407 was introduced, made a change of engine. Although they were still using a Chrysler V8 engine, the old A type engine was gone. Replacing it was the much larger big-block B series engine of 6,277 cc (383 cubic inches) - as compared to the 5,211cc of the 410. This much larger engine gave the 411 an estimated 30 percent more power than had been found in the 410. The 411 was capable of 230 km/h (143 mph). To cope with this extra power, a limited slip differential was fitted so that the car skidded much less at high speeds.

The interior showed a number of important changes from the Bristol 410, famously driven by Paul Lewis.clarifyme|who is P Lewis? The traditional Blümel twin-spoke steering wheel was replaced by a more practical three-spoked leather-wrapped wheel, which as a result of the traditional Bristol badge being removed from the front of the car, was the "only" place where this badge was retained.

Over its seven years in production, the 411 showed a number of changes. The 1971 Series 2 added self-levelling suspension and a metric odometer, whilst the Series 3 from a year later had a lower compression ratio and completely revised styling. This edition was the first Bristol to possess the four-headlamp layout that was oddly anticipated by some of the company's earliest models, and to power this a bigger alternator was used. For the Series 4 of 1974, the compression ratio was reduced dramatically (from 9.5:1 to 8.2:1) but this was compensated by using a larger version of the B series engine with a capacity of 6,556 cc (400 cubic inches). The Series 5 made from 1975 to 1976 had the original Bristol badge restored and was the first Bristol to feature inertia reel seat belts.

Notes

External links

* [http://boc.net/type_411.php Type 411]