- Bristol Type 603
name = Bristol Type 603
production = 1976 onwards no production figures published
body_style = 2-door saloon
engine = 5.2 or 5.9 litre
transmission = 3-speed automatic 4-speed automatic from Blenheim 2
length = 193 inches (4910 mm)
width = 69 inches (1770 mm)
height = 57 inches (1440 mm)
designer = The Bristol Type 603 is a car which was launched in 1976, by British manufacturer
Bristol Carsto replace the 411.
With the 603 – introduced along with the Zagato-built 412 – the Bristol car underwent its first major facelift since the introduction of the 406 in the late 1950s. The classic three-box two-door saloon was replaced with a considerably more streamlined design with a much larger and more curved rear window. The outdated style of door handle was updated.
The original 603 was offered in two versions, largely owing to the
energy crisiswhich increased fuel prices so that affordability of fuel was no longer a certainty for those who could afford such expensive cars. The 603E has a 5,211 cc V8 petrol engine, whereas the 603S had a larger 5.9 litre unit, from Chrysler. The 603 saw improvements over previous models in its fuel consumption, being able to achieve as much as mpg (Imperial)|22 at around 100 km/h as against the 411's mpg (Imperial)|17 — for comparison, as good as the Jaguar XJ-S. Both retained the same transmission and suspension as the 411, but the cabin had become more luxurious with the provision of electrically adjustable seats and air conditioning.
With the 603S2, as the energy crisis eased, all Bristols had a standard 5.9 litre Chrysler unit that was to be used for all subsequent editions of the car. The headlamp clusters were also set in a new grille.
603S3 (Britannia and Brigand)
The third series of 603, introduced in 1982 and continuing until 1994, saw Bristol adopt for the first time the names of the famous
Bristol Aeroplane Companymodels for its cars. With this series of 603, there was a smaller radiator grille and more modern rear vision mirrors. The tail-lights were also mounted directly vertically, whereas on previous versions of the 603 the reversing lights were separate from the rear turn indicators and brake lights.
The Bristol Britannia was the standard version, whilst the Bristol Brigand had a Rotomeister
turbochargeradded to the Chrysler V8 engine and a torque converteroriginally used on the 440 V8 to cope with the extra performance, which saw the Brigand capable of 150 mph (241 km/h). The Brigand could be distinguished from the Britannia by the bulge in the bonnet needed to accommodate the turbocharger, and also had alloy wheels as standard equipment.
There were a number of minor changes to the appearance of both models during their 12-year production run, especially at the front.
Bristol Blenheim (603 S4)
With the Blenheim, Bristol further refined the 603, in particular modernising the mechanicals of the car through the introduction of Multi-Port
fuel injection, which improved both performance and fuel consumption. Turbocharging was no longer available, but the Blenheim Series 1 still had the same level of performance as the Brigand.
There was a significant change in frontal and rear-end styling with the introduction of the Blenheim. The headlights were paired and mounted considerably inboard from the extreme front of the car. The bonnet was also modified with the fitting of gas struts to hold it up when open for the first time, and featured a fully rectangular hinge for the first time in Bristol's history.
Since that time the Blenheim has gone through two additional series, the Bristol Blenheim Series 2, made from 1998 to the end of 1999, featured for the first time a 4 speed overdrive
automatic transmission, which significantly improved fuel consumption, whilst the Blenheim 3 which went on sale in 2000 saw the abandonment of the vertically mounted tail-lights and a much revised interior layout with completely new gear selector and improved instrumentation.
* [http://www.boc.net/type_603.php Bristol Owners Club Type 603 pages]
Wikimedia Foundation. 2010.