Allerton TMD

Allerton TMD

Allerton TMD is a railway traction maintenance depot situated in Liverpool. The depot is opposite the newly built Liverpool South Parkway and is visible to the north on the way to Hunts Cross. The depot is operated by EWS. The depot code is now AN but, in steam days, the shed code was 8H.

Until 2006, Merseyrail Class 507 and Class 508 sets were regularly sent to this depot for wheel turning. A new wheel lathe has opened at Kirkdale TMD thus ending the practice of sending units here.

Other units, including former Virgin Voyagers and goods carriages/engines have been stabled here. The depot is located very close to Garston Freightliner Terminal (Garston Docks) and also not far from Widnes Intermodal Depot.

References

*


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Kirkdale TMD — (code KK ) is a Traction Maintenance Depot located beside Kirkdale railway station in north Liverpool, England. It is the largest depot on the Merseyrail network, located on the Northern Line and is used primarily for stabling units, carrying out …   Wikipedia

  • Merseyrail — Merseyrail …   Wikipedia

  • Immingham — infobox UK place country = England latitude= 53.6139 longitude= 0.2183 map type= Lincolnshire official name= Immingham population = 12,200 unitary england= North East Lincolnshire lieutenancy england=Lincolnshire region= Yorkshire and the Humber… …   Wikipedia

  • Northern Line (Merseyrail) — For other uses, see Northern Line (disambiguation). Northern Line (Merseyrail) A Northern Line Class 507 at Liverpool Central. Overview System …   Wikipedia

  • List of British Railways shed codes — All British Railways steam locomotives were allocated to a particular motive power depot, usually known as a shed . Each shed had a shed code which was displayed on an oval plate attached to the smokebox door of each locomotive allocated to that… …   Wikipedia

Share the article and excerpts

Direct link
https://en-academic.com/dic.nsf/enwiki/2851345 Do a right-click on the link above
and select “Copy Link”