Quantum critical point

A quantum critical point is a special class of continuous phase transition that takes place at the absolute zero of temperature, typically in a material where the phase transition temperature has been driven to zero by the application of a pressure, field or through doping. Conventional phase transitions occur at finite temperature, when the growth of random thermal fluctuations leads to achange in the physical state of a system. Condensed matter physics research over the past few decades has revealed a new class of phase transitions, called a quantum phase transition, which take place at absolute zero, and which aredriven by the zero point quantum fluctuations associated with Heisenberg's uncertainty principle.

Overview

Within the class of phase transitions, there are two main categories: At a first-order phase transition, the properties shift discontinuously, as in the melting of solid, whereas at a second order phase transition, the state of the system changes in a continuous fashion. Second-order phase transitions are marked by the growth of fluctuations on ever-longer length-scales. These fluctuations are called "critical fluctuations". At the critical point where a second-order transition occurs the critical fluctuations are scale invariant and extend over the entire system. At a finite temperature phase transition, the fluctuations that develop at a critical point are governed by classical physics, because their characteristic energy is always smaller than the characteristic Boltzmann thermal energy $k\_B\; T$.

At a quantum critical point, the critical fluctuations are quantum mechanical in nature, exhibiting scale invariance in both space and in time. Unlike classical critical points, where the critical fluctuations are limited to a narrow region around the phase transition, the influence of a quantum critical point is felt over a wide range of temperatures above the quantum critical point, so the effect of quantum criticality is felt without ever reaching absolute zero. Quantum criticality was first observed in ferroelectrics, in which the ferroelectric transition temperature is suppressed to zero.

A wide variety of metallic ferromagnets and antiferromagnets have been observed to develop quantum critical behavior when their magnetic transition temperature is driven to zero through the application of pressure, chemical doping or magnetic fields. In these cases, the properties of the metal are radically transformed by the critical fluctuations, departing qualitatively from the standard Fermi liquid behavior, to form a metallic state sometimes called a "non-Fermi liquid" or a "strange metal". There is particular interest in these unusual metallic states, which are believed to exhibit a marked preponderence towards the development of superconductivity.

Theories

Hertz Millis Theory

Beyond Hertz Millis

Local quantum criticality

Deconfined criticality

Magnetic quantum critical points

Heavy electron quantum criticality

Quantum criticality in cuprate superconductors

Quantum critical endpoints

Quantum critical points arise when a susceptibility diverges at zero temperature. There are a number of materials (such as CeNi₂Ge₂ [Non-Fermi-Liquid Effects at Ambient Pressure in a Stoichiometric Heavy-Fermion Compound with Very Low Disorder: CeNi₂Ge₂, P. Gegenwart, F. Kromer, M. Lang, G. Sparn, C. Geibel and F. Steglich. Phys. Rev. Lett. 82, #6, 1293-1296 (1999). [http://link.aps.org/abstract/PRL/v82/p1293 Abstract] ] ) where this occurs serendipitously. More frequently a material has to be tuned to a quantum critical point. Most commonly this is done by taking a system with a second-order phase transition which occurs at finite temperature and tuning it—for example by applying pressure or magnetic field or changing its chemical composition. CePd₂Si₂ is such an example [ The normal states of magnetic d and f transition metals, S R Julian, C Pfleiderer, F M Grosche, N D Mathur, G J McMullan, A J Diver, I R Walker and G G Lon zarich, J. Phys.:condens. matt. 8, #48, 9675-9688 (1996) [http://iop.org/EJ/abstract/0953-8984/8/48/002 Abstract] ] , where the antiferromagnetic transition which occurs at about 10K under ambient pressure can be tuned to zero temperature by applying a pressure of 28,000 atmospheres. Less commonly a first-order transition can be made quantum critical. First-order transitions do not normally show critical fluctuations as the material moves discontinuously from one phase into another. However if the first order phase transition does not involve a change of symmetry then the phase diagram can contain a critical endpoint where the first-order phase transition terminates. Such an endpoint has a divergent susceptibility. The transition between the liquid and gas phases is an example of a first-order transition without a change of symmetry and the critical endpoint is characterized by critical fluctuations known as critical opalescence.

A quantum critical endpoint arises when a finite temperature critical point is tuned to zero temperature. One of the best studied examples occurs in the layered ruthenate metal, Sr₃Ru₂O₇ in a magnetic field [Magnetic Field-Tuned Quantum Criticality in the Metallic Ruthenate Sr₃Ru₂O₇, S. A. Grigera, R. S. Perry, A. J. Schofield, M. Chiao, S. R. Julian, G. G. Lonzarich, S. I. Ikeda, Y. Maeno, A. J. Millis, A. P. Mackenzie, Science 294, #5541, 329-332 (2001). [http://sciencemag.org/cgi/content/abstract/294/5541/329 Abstract] ] . This material shows metamagnetism with a low-temperature first-order metamagnetic transition where the magnetization jumps when a magnetic field is applied within the directions of the layers. The first-order jump terminates in a critical endpoint at about 1 kelvin. By switchan the direction of the magnetic field so that it points almost perpendicular to the layers, the critical endpoint is tuned to zero temperature at a field of about 8 teslas. The resulting quantum critical fluctuations dominate the physical properties of this material at nonzero temperatures and way from the critical field. The resistivity shows a non-Fermi liquid response, the effective mass of the electron grows and the magnetothermal expansion of the material is modified all in response to the quantum critical fluctuations.

Ferro-electrics

Other classes of quantum phase transition

Notes

References

*cite book|author=Cyril Domb|title=The critical point: a historical introduction to the modern theory of critical phenomena|publisher=Taylor and Francis|year=1996
*cite journal|author=Hertz, J.|title=Quantum Critical Phenomena|journal=Phys. Rev. B|volume=14|pages=1165–1184|year=1976|doi=10.1103/PhysRevB.14.1165
*cite book|author=S. Sachdev|title=Quantum Phase Transitions|publisher=Cambridge University Press|year=1999
*cite book|author=M.A. Continentino|title=Quantum Scaling in Many-Body Systems|publisher=World Scientific|year=2001
*cite journal|author=P. Coleman, A. J. Schofield|title=Quantum criticality|journal=Nature|volume=433|pages=226–229|year=2005|url=http://arxiv.org/abs/cond-mat/0503002|doi=10.1038/nature03279|format=subscription required