- Partial fractions in complex analysis
In
complex analysis , a partial fraction expansion is a way of writing ameromorphic function "f(z)" as an infinite sum ofrational functions andpolynomials . When "f(z)" is a rational function, this reduces to the usual method of partial fractions.Motivation
By using
polynomial long division and the partial fraction technique from algebra, any rational function can be written as a sum of terms of the form "1 / (az + b)k" + "p(z)", where "a" and "b" are complex, "k" is an integer, and "p(z)" is a polynomial . Just aspolynomial factorization can be generalized to theWeierstrass factorization theorem , there is an analogy to partial fraction expansions for certain meromorphic functions.A proper rational function, i.e. one for which the degree of the denominator is greater than the degree of the numerator, has a partial fraction expansion with no polynomial terms. Similarly, a meromorphic function "f(z)" for which |"f(z)"| goes to 0 as "z" goes to infinity at least as quickly as |"1/z"|, has an expansion with no polynomial terms.
Calculation
Let "f(z)" be a function meromorphic in the finite complex plane with
poles at "λ1", "λ2", ..., and let ("Γ1", "Γ2", ...) be a sequence of simple closed curves such that:* The origin lies inside each curve "Γk"
* No curve passes through a pole of "f"
* "Γk" lies inside "Γk+1" for all "k"
* , where "d(Γk)" gives the distance from the curve to the originSuppose also that there exists an integer "p" such that
:
Writing PP("f(z)"; "z = λk") for the
principal part of theLaurent expansion of "f" about the point "λk", we have:
if "p = -1", and if "p > -1",
:
where the coefficients "cj,k" are given by
:
λ0 should be set to 0, because even if "f(z)" itself does not have a pole at 0, the residues of "f(z)/zj+1" at "z" = 0 must still be included in the sum.
Note that in the case of λ0 = 0, we can use the Laurent expansion of "f(z)" about the origin to get
:::
so that the polynomial terms contributed are exactly the
regular part of the Laurent series up to "zp".For the other poles "λk" where "k" ≥ 1, "1/zj+1" can be pulled out of the residue calculations:
::
To avoid issues with convergence, the poles should be ordered so that if λk is inside Γn, then λj is also inside Γn for all "j" < "k".
Example
The simplest examples of meromorphic functions with an infinite number of poles are the non-entire trigonometric functions, so take the function tan("z"). tan("z") is meromorphic with poles at "(n + 1/2)π", "n" = 0, ±1, ±2, ... The contours "Γk" will be squares with vertices at "±πk ± πki" traversed counterclockwise, "k" > 1, which are easily seen to satisfy the necessary conditions.
On the horizontal sides of "Γk",
:
so
:
:
sinh("x") < cosh("x") for all real "x", which yields
:
For "x" > 0, coth("x") is continuous, decreasing, and bounded below by 1, so it follows that on the horizontal sides of "Γk", |tan("z")| < coth("π"). Similarly, it can be shown that |tan("z")| < 1 on the vertical sides of "Γk".
With this bound on |tan("z")| we can see that
:
(The maximum of |1/"z"| on "Γk" occurs at the minimum of |"z"|, which is "kπ").
Therefore "p" = 0, and the partial fraction expansion of tan("z") looks like
:
The principal parts and residues are easy enough to calculate, as all the poles of tan("z") are simple and have residue -1:
::
We can ignore "λ0" = 0, since both tan("z") and tan("z")/"z" are analytic at 0, so there is no contribution to the sum, and ordering the poles "λk" so that "λ1" = "π"/2, "λ2" = -"π"/2, "λ3" = 3"π"/2, etc., gives
::
Applications
Infinite products
Because the partial fraction expansion often yields sums of "1/(a+bz)", it can be useful in finding a way to write a function as an
infinite product ; integrating both sides gives a sum of logarithms, and exponentiating gives the desired product::::
Applying some logarithm rules,
::
which finally gives
:
Laurent series
The partial fraction expansion for a function can also be used to find a Laurent series for it by simply replacing the rational functions in the sum with their Laurent series, which are often not difficult to write in closed form. This can also lead to interesting identities if a Laurent series is already known.
Recall that
:
We can expand the summand using a geometric series:
:
Substituting back,:
which shows that the coefficients "an" in the Laurent (Taylor) series of "tan(z)" about "z" = 0 are
::
where "Tn" are the
tangent numbers .Conversely, we can compare this formula to the Taylor expansion for tan("z") about z = 0 to calculate the infinite sums:
:::
ee also
*
Partial fraction
*Line integral References
* Markushevich, A.I. "Theory of functions of a complex variable". Trans. Richard A. Silverman. Vol. 2. Englewood Cliffs, N.J.: Prentice-Hall, 1965.
Wikimedia Foundation. 2010.