USS Koka (1865)

USS "Koka"—a single-turreted, twin-screw monitor—was launched 18 May 1865 by Wilcox & Whiting, Camden, NJ. She was a "Casco"-class, light-draft monitor intended for service in the shallow bays, rivers, and inlets of the Confederacy. These warships sacrificed armor plate for a shallow draft and were fitted with a ballast compartment designed to lower them in the water during battle.

Though the original designs for the "Casco"-class monitors were drawn by John Ericsson, the final revision was created by Chief Engineer Alban B. Simers following Rear Admiral Samuel F. Du Pont's failed bombardment of Fort Sumter in 1863. By the time that the plans were put before the Monitor Board in New York, NY, Ericsson and Simers had a poor relationship, also Chief of Naval Construction John Lenthall had little connection to the board. This resulted in the plans being approved and 20 vessels ordered without serious scrutiny of the new design. $14 million US was allocated for the construction of these vessels. It was discovered that Simers had failed to compensate for the armor his revisions added to the original plan and this resulted in excessive stress on the wooden hull frames and a freeboard of only 3 inches. Simers was removed from the control of the project and Ericsson was called in to undo the damage. He was forced to raise the hulls of the monitors under construction by 22 inches to make them sea-worthy.

As a result, the Navy Department suspended completion of the ship 17 June 1865, and she was laid up at League Island Navy Yard, Philadelphia, PA, without any active service. Renamed "Argos" 15 June 1869, she was again renamed "Koka" 10 August that same year. She was broken up at Philadelphia, PA, 2 October 1874, by Harlan & Hollingsworth Co., Wilmington, DE, for use in the construction of the USS|Amphitrite|BM-2|2.

References