- Double fisherman's knot
-
Double Fisherman's knot 
Names Double Fisherman's knot, Grapevine, Double englishman's knot Category Bend Origin Ancient Related Fisherman's knot, Triple fisherman's knot, Double overhand knot, Strangle knot Releasing Jamming Typical use Joining thin, stiff or slippery lines, backing up critical knots such as the Figure-of-eight loop or Figure-of-eight follow through Caveat Difficult to untie ABoK #294, #1415 The double fisherman's knot or grapevine knot is a bend, or a knot used to join two lengths of rope. This knot and the triple fisherman's knot are the variations used most often in climbing, arboriculture, and search and rescue. The knot is formed by tying a double overhand knot, in its strangle knot form, with each end around the opposite line's standing part.
Contents
Usage
A primary use of this knot is to form high strength loops of cord for connecting pieces of a climber's protection system. Another common use for this knot is to back up a critical knot, such as a harness tie-in knot or single-line rappel rigs. In this use, the running end is tied around the standing end of the rope, so that it cannot slip back through the knot.
Other uses
This knot, along with the basic fisherman's knot can be used to join the ends of a necklace cord. The two double overhand knots are left separated, and in this way the length of the necklace can be adjusted without breaking or untying the strand.
Tying
-
Line form
-
-
-
-
Drop form
-
-
-
Security
Dyneema/Spectra's very high lubricity leads to poor knot-holding ability, and has led to the recommendation to use the triple fisherman's knot rather than the traditional double fisherman's knot in 6mm Dyneema core cord to avoid a particular failure mechanism of the double fisherman's, where first the sheath fails at the knot, then the core slips through.[1][2]
See also
- List of bend knots
- List of knots
References
External links
Categories:- Bend knots
- Climbing knots
-
Wikimedia Foundation. 2010.
