- Perfectly matched layer
A perfectly matched layer (PML) is an artificial absorbing layer for
wave equation s, commonly used to truncate computational regions innumerical method s to simulate problems with open boundaries, especially in theFDTD and FEM methods. The key property of a PML that distinguishes it from an ordinary absorbing material is that it is designed so that waves incident upon the PML from a non-PML medium do not reflect at the interface—this property allows the PML to strongly absorb outgoing waves from the interior of a computational region without reflecting them back into the interior.PML was originally formulated by Berenger in 1994 for use with
Maxwell's equations , and since that time there have been several related reformulations of PML for both Maxwell's equations and for other wave equations. Berenger's original formulation is called a split-field PML, because it splits theelectromagnetic field s into two unphysical fields in the PML region. A later formulation that has become more popular because of its simplicity and efficiency is called uniaxial PML or UPML (Gedney, 1996), in which the PML is described as an artificial anisotropic absorbing material. Although both Berenger's formulation and UPML were initially derived by manually constructing the conditions under which incidentplane wave s do not reflect from the PML interface from a homogeneous medium, "both" formulations were later shown to be equivalent to a much more elegant and general approach: stretched-coordinate PML (Chew and Weedon, 1994; Teixeira and Weedon, 1998). In particular, PMLs were shown to correspond to acoordinate transformation in which one (or more) coordinates are mapped tocomplex number s; more technically, this is actually ananalytic continuation of the wave equation into complex coordinates, replacing propagating (oscillating) waves byexponentially decaying waves. This viewpoint allows PMLs to be derived for inhomogeneous media such aswaveguide s, as well as for othercoordinate system s and wave equations.Technical description
Specifically, for a PML designed to absorb waves propagating in the "x" direction, the following transformation is included in the wave equation. Wherever an "x" derivative appears in the wave equation, it is replaced by::where ω is the
angular frequency and σ is some function of "x". Wherever σ is positive, propagating waves are attenuated because::where we have taken a planewave propagating in the +"x" direction (for ) and applied the transformation (analytic continuation) to complex coordinates: , or equivalently . The same coordinate transformation causes waves to attenuate whenever their "x" dependence is in the form for somepropagation constant "k": this includes planewaves propagating at some angle with the "x" axis and alsotransverse mode s of a waveguide.The above coordinate transformation can be left as-is in the transformed wave equations, or can be combined with the material description (e.g. the
permittivity andpermeability in Maxwell's equations) to form a UPML description. Note also that the coefficient σ/ω depends upon frequency—this is so the attenuation rate is proportional to "k"/ω, which is independent of frequency in a homogeneous material (not includingmaterial dispersion , e.g. forvacuum ) because of thedispersion relation between ω and "k". However, this frequency-dependence means that atime domain implementation of PML, e.g. in theFDTD method, is more complicated than for a frequency-independent absorber, and involves theauxiliary differential equation (ADE) approach (equivalently, "i"/ω appears as anintegral orconvolution in time domain).Perfectly matched layers, in their original form, only attenuate propagating waves; purely
evanescent waves (exponentially decaying fields) oscillate in the PML but do not decay more quickly. However, the attenuation of evanescent waves can also be accelerated by including a real coordinate stretching in the PML: this corresponds to making σ in the above expression acomplex number , where the imaginary part yields a real coordinate stretching that causes evanescent waves to decay more quickly.One caveat with perfectly matched layers is that they are only reflectionless for the "exact" wave equation. Once the wave equation is discretized for simulation on a computer, some small numerical reflections appear. For this reason, the PML absorption coefficient σ is typically turned on gradually from zero (e.g. quadratically) over a short distance on the scale of the
wavelength of the wave.References
*cite journal | author= J. Berenger | title= A perfectly matched layer for the absorption of electromagnetic waves | journal= Journal of Computational Physics | year= 1994 | volume= 114 | pages= 185–200 | doi= 10.1006/jcph.1994.1159
*cite journal | author= S.D. Gedney | title= An anisotropic perfectly matched layer absorbing media for the truncation of FDTD latices| journal= Antennas and Propagation, IEEE Transactions on | year= 1996 | volume= 44 | pages= 1630–1639 | doi= 10.1109/8.546249
*cite journal | author= W. C. Chew and W. H. Weedon | title= A 3d perfectly matched medium from modified Maxwell's equations with stretched coordinates| journal= Microwave Optical Tech. Letters | year= 1994 | volume= 7 | pages= 590–604
*cite journal | author= F. L. Teixeira W. C. Chew | title= General closed-form PML constitutive tensors to match arbitrary bianisotropic and dispersive linear media| journal= IEEE Microwave and Guided Wave Letters | year= 1998 | volume= 8 | pages= 223–225 | doi= 10.1109/75.678571
* A. Taflove and S. C. Hageness, "Computational Electrodynamics: The Finite-Difference Time-Domain Method" (Norwood, MA: Artech, 2000).
* S. G. Johnson, [http://math.mit.edu/~stevenj/18.369/pml.pdf Notes on Perfectly Matched Layers] , online MIT course notes (Aug. 2007).
Wikimedia Foundation. 2010.