Reorder tone

Reorder tone

The reorder tone, also known as the fast busy tone, is the congestion tone or all trunks busy (ATB) tone of a public switched telephone network. It varies from country to country; in the USA it is a dual-frequency tone of 480 Hz and 620 Hz at a cadence of 0.25 seconds on, 0.25 off; that is two beeps per second. It is used to indicate that an invalid code has been dialled, or that all circuits (trunks) are busy and/or the call is unroutable.[1] A PBX will often also do this for an invalid extension, while an invalid telephone number on the PSTN usually gets the triple special information tone and a recording. Reorder tone is sometimes confused with the busy signal.

See also

External links

References

  1. ^ "NENA Master Glossary Of 9-1-1 Terminology". National Emergency Number Association (NENA). http://www.nena.org/sites/default/files/20100929_MG_00-001_V14.pdf. Retrieved 2011-03-18. 



Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • reorder signal —    Audible tone, faster than a busy signal, that indicates all switching paths needed to connect a call are in use …   IT glossary of terms, acronyms and abbreviations

  • Disconnect tone — A disconnect tone in telephony is a tone provided to the remaining party to a call after the remote party hangs up. Typically, the disconnect tone is a few cycles of the reorder or busy tone (e.g. in US), or between five and fifteen seconds of… …   Wikipedia

  • Dial tone — For the G.I. Joe character, see Dial Tone (G.I. Joe). A dial tone (known in the British Isles as a dialling tone)[1] is a telephony signal used to indicate that the telephone exchange is working, has recognized an off hook, and is ready to accept …   Wikipedia

  • Dual-tone multi-frequency signaling — One of the few production telephone DTMF keypads with all 16 keys, from an Autovon Telephone. The column of red keys produces the A, B, C, and D DTMF events. Dual tone multi frequency signaling (DTMF) is used for telecommunication signaling over… …   Wikipedia

  • Off-hook tone — The off hook tone (also receiver off hook tone or off hook warning) is a telephony signal used to alert a user that the telephone has been left off hook for an extended period, effectively disabling the telephone line. See permanent signal.… …   Wikipedia

  • Precise Tone Plan — The Precise Tone Plan specification for the North American network defines the Call progress tones used for standard signaling in the PSTN. The tones are as follows:* dial tone is a continuous tone having frequencies of 350 and 440 Hz at a level… …   Wikipedia

  • Special information tones — In telephony, a special information tone (SIT) is an international standard three beep signal indicating a call did not go through and usually precedes a recorded announcement explaining the problem.[1] As the SIT is well known in many countries …   Wikipedia

  • Busy signal — For other uses, see Busy signal (disambiguation). A busy signal (or busy tone or engaged tone) in telephony is an audible or visual signal to the calling party that indicates failure to complete the requested connection of that particular… …   Wikipedia

  • Ringtone — For the Weird Al Yankovic song, see Ringtone (song). For the film, see Ringtone (film). A ringtone or ring tone is the sound made by a telephone to indicate an incoming call or text message. Not literally a tone, the term is most often used today …   Wikipedia

  • Autovon — AUTOVON, short for Automatic Voice Network , was an American military phone system built in 1963 to survive nuclear attacks. AUTOVON was first established in the United States, using the Army s SCAN (Switch Communications Automated Network)… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”