Ringback tone

Ringback tone

A Ring-back Tone (RBT), or Audible Ringing Tone or Ring-back Signal, is the audible ringing that is heard on the telephone line by the calling party after dialing and prior to the call being answered at the receiving end. This tone assures the calling party that a ringing signal is being sent on the called party's line, although the ring-back tone may be out of sync with the ringing signal.

Ring-back tone characteristics

The ring-back tone is different in various countries depending on the requirements for the ring-back specification in those countries. The ring-back signal may be generated by the called-party servicing switch(S-MSC) or by the calling-party switch (O-MSC), but it is not generated by the called telephone instrument. It is generally started and stopped at the same rate as the ringing signal itself but perhaps out of phase.

United Kingdom and the Commonwealth

In the UK and many other Commonwealth countries, it is a signature double beep. For most countries, it consists of a 0.4-second pulse, a 0.2-second pause, a 0.4-second pulse, and a 2-second pause. The pulse is made by mixing a 400 Hz and 450 Hz sine wave.

This tone has been made famous by being included at the end of Pink Floyd's "Another Brick in the Wall (Part 2)" and "Young Lust". It is also used in Spacehog's song "In the meantime", as well as The Penguin Cafe Orchestra's "Telephone and Rubber Band".

North American Numbering Plan

In the NANP (United States, Canada, and others), the standard Audible Ring or ring-back signal is generated by summing a 440 Hz tone with a 480 Hz tone and applying these to the telephone line in a 2 second on and 4 second off cadence. The tone combination produces a warbling "ring... ring..." sound, caused by the 40Hz beat between the two.

listen
filename=NorthAmericanRingback.ogg
title=Example of a North American ring-back tone
description=Listen to a ring-back tone from North America.

Rest of the world

Most other countries use a single tone, as do some PBX and key phone systems.

In some countries, for example India, ringback tone is referred to as dialer tone.

Personalized ring-back tone

In recent years "personalized" ring-back tones have become globally popularFact|date=September 2008. With this feature, callers will hear an audio selection applied to the telephone line that has been previously determined by the called party. Audio selections can include music, messages, greetings and special effects like mixing. Equipment is installed in the telephone network to enable replacement of the standard ring-back tone with a personalized audio selection. This ensures that the handset equipment is not burdened with media storage and playback .The application of the personalized audio selections is accomplished with a subscriber account that can be modified through WWW, WAP, SMS, USSD or Voice User Interfaces, as well as by customer care personnel.

The first personalized ring-back tone service called Color Ring Back Tone (CRBT) was invented by a South Korean company, Witcom in May 2001 and started service with SK Telecom in South Korea from April 2002. [cite web |url=http://www.skyventure.co.kr/sk2005/campaign/view.asp?Num=12 |title=Article on skyventure.co.kr |language=Korean |accessdate=2007-04-18Dead link|date=February 2008.] Witcom also developed CRBT IP server for mass service as well. In March 2004, Vodafone D2 was the first European operator to launch the Ringback Tone service. Vodafone used the European Computer Telecoms (ECT) solution.

Today various companies supply personalized ring-back equipment for mobile phone and landline telephone companies. Most mobile operators offer RBT services to their customers. The first company to launch a commercial system in the United States was Preferred Voice, Inc. Most global communication companies now have ringback equipment provided by VAS vendors like Livewire Mobile,RealNetworks,FFCL, Huawei,Alcatel-Lucent, Comverse Technology, Ericsson, Nortel,Eluon, Wind Mobile OnMobile and SixDee.

The majority of mobile operators provide RBT services to their customers. Some operators use a "multi-country system", with one RBT system providing content and subscriber services to each country market. The most notable is Vodafone which has 18 local markets. The rollout was done with LogicaCMG doing most of the system integration, using the MyCaller system from Livewire Mobile(was formerly NMS communications) as an RBT solution, although some Vodafone operators are using different platforms, such as Comverse's Fun Dial platform used by Vodafone Italy.

The use of such nonstandard telephony signals can cause problems with automatic dialing equipment such as faxes and modems, however lines intended to receive such data telephone calls normally have the proper ring-back tone. In addition, a caller may define specific users to whom the personalized content will be played. Other callers will hear the "traditional" ring-back tone.

ee also

*Ringtone

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Ringback tone — Tonalité de retour d appel Une tonalité ou sonnerie de retour (d appel), ou ringback tone (anglicisme), est un signal sonore entendu sur une ligne téléphonique par une personne qui émet un appel, après avoir composé le numéro de son correspondant …   Wikipédia en Français

  • Ringback — may refer to:* Ringback tone, the audible ringing that is heard by the calling party after dialing * Ringback number, a number used by phone companies to test whether a telephone line and phone number is working * Automatic ring back, a telephony …   Wikipedia

  • Ringback number — is a number used by many phone companies to test whether or not a new telephone line is working correctly and the phone number is routing properly.Typically it works by calling a ringback number and then hanging up. Often the ringback number… …   Wikipedia

  • Dual-tone multi-frequency signaling — One of the few production telephone DTMF keypads with all 16 keys, from an Autovon Telephone. The column of red keys produces the A, B, C, and D DTMF events. Dual tone multi frequency signaling (DTMF) is used for telecommunication signaling over… …   Wikipedia

  • Dial tone — For the G.I. Joe character, see Dial Tone (G.I. Joe). A dial tone (known in the British Isles as a dialling tone)[1] is a telephony signal used to indicate that the telephone exchange is working, has recognized an off hook, and is ready to accept …   Wikipedia

  • Call-progress tone — In telephony, call progress tones are audible tones sent from the PSTN or a PBX to calling parties to indicate the status of phone calls. Equipment such as fax machines and modems are designed to recognise dial tones and busy tones.The ITU T… …   Wikipedia

  • Off-hook tone — The off hook tone (also receiver off hook tone or off hook warning) is a telephony signal used to alert a user that the telephone has been left off hook for an extended period, effectively disabling the telephone line. See permanent signal.… …   Wikipedia

  • Reorder tone — The reorder tone, also known as the fast busy tone, is the congestion tone or all trunks busy (ATB) tone of a public switched telephone network. It varies from country to country; in the USA it is a dual frequency tone of 480 Hz and 620 Hz at a… …   Wikipedia

  • Disconnect tone — A disconnect tone in telephony is a tone provided to the remaining party to a call after the remote party hangs up. Typically, the disconnect tone is a few cycles of the reorder or busy tone (e.g. in US), or between five and fifteen seconds of… …   Wikipedia

  • Precise Tone Plan — The Precise Tone Plan specification for the North American network defines the Call progress tones used for standard signaling in the PSTN. The tones are as follows:* dial tone is a continuous tone having frequencies of 350 and 440 Hz at a level… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”