Meridian altitude

Meridian Altitude is an astronomical navigation method of calculating an observer's latitude.

Principle

This is the simplest calculation of astronomical navigation and is when an observer determines his latitude by measuring the altitude of a heavenly object at the time of its meridian passage. Meridian passage is when the object passes the observer's meridian, i.e. passes through south or north. This is usually done with the sun for a noon latitude but can be done with any heavenly object. Noon is when the sun passes through the meridian.

Let us imagine that the sun is overhead (at the zenith) at a point on the equator (latitude 0°) and observer A is standing at this point, the geographical point of the sun. If he were to measure the height of the sun above the horizon with a sextant he would find that the altitude of the sun was 90°. By subtracting this figure from 90° he would find the zenith distance of the sun which is 0°, which is the same as his latitude. Observer B is standing at one of the poles (latitude 90°N or 90°S) he would see the sun on the horizon at an altitude of 0°. By subtracting this from 90° he would find that the zenith distance is 90°, which is his latitude. Observer C at the same time is at latitude 20°N on the same meridian, i.e. on the same longitude as observer A. His measured altitude would be 70° and by subtracting this from 90° gives a 20° zenith distance which in turn is his latitude. In short, the zenith distance of a heavenly object at meridian altitude is the difference in latitude between it and the observer.

Methodology

The estimated time of meridian altitude of the heavenly object is extracted from the nautical almanac. A few minutes before this time the observer starts observing the altitude of the object with a sextant. The altitude of the object will be increasing and the observer will continually adjust the sextant to keep the reflected image of the object on the horizon. As the object passes the meridian a maximum altitude will be observed. The time in UTC of this is observed.

The altitude obtained is corrected for dip (the error caused by the observers height above the sea) and refraction to obtain the true altitude of the object above the horizon. This is then subtracted from 90° to obtain the angular distance from the position directly above to obtain the zenith distance.

See also

• Celestial navigation
• Navigation
• Latitude
• Longitude
• Haversine formula
• Intercept method
• Longitude by chronometer
• Ex-meridian

References

• Nicholls's Concise Guide, Volume 1, by Charles H. Brown F.R.S.G.S. Extra Master
• Norie's Nautical Tables, edited by Capt. A.G. Blance
• The Nautical Almanac 2005, published by Her Majesty's Nautical Almanac Office
• Navigation for School and College, by A.C Gardner and W.G. Creelman