- British Rail 18100
Infobox Locomotive
name = British Rail 18100
powertype = Gas turbine-electric
caption =
builder =Metropolitan Vickers , Trafford Park
ordernumber = GWR Lot 388
builddate = 1951
primemover =
transmission = DC generators
DC traction motors
uicclass = Co'Co'
gauge=RailGauge|ussg|lk=on
wheeldiameter = convert|3|ft|8|in|m|3|abbr=on
trainbrakes = Vacuum
wheelbase = convert|53|ft|0|in|m|2|abbr=on
length = convert|66|ft|9+1/4|in|m|2|abbr=on
width = convert|9|ft|0|in|abbr=on
height = convert|12|ft|10|in|abbr=on
weight = convert|129.50|LT
topspeed = convert|90|mph|km/h|0|abbr=on
poweroutput = convert|3000|hp|abbr=on|sigfig=3
"At rail:" convert|2450|hp|abbr=on
generator = Metropolitan-Vickers, 3 off
tractionmotors = Metropolitan-Vickers, 6 off
tractiveeffort = convert|60000|lbf|kN|2|abbr=on
powerclass = BR Type 5
trainheating = Spanner steam generator
railroad =British Railways
retiredate = December 1957
firstrundatre = 1952
lastrundate = 1954
disposition = Rebuilt to 25 kV electric locomotive E1000 (E2001 from 1959)British Rail 18100 was a prototype main line
gas turbine-electric locomotive built forBritish Railways in 1951 byMetropolitan Vickers ,Manchester . It had, however, been ordered by theGreat Western Railway in the 1940s, but construction was delayed due toWorld War II . It spent its working life on theWestern Region of British Railways , operating express passenger services fromLondon Paddington station .Overview
It was of Co-Co wheel arrangement and its
gas turbine was rated at 3000 hp. It had a maximum speed of 90mph and weighed 129.5 tons. It was painted in BR black livery, with a silver stripe around the middle of the body and silver numbers.Technical details
The gas turbine was of a type which would now be called a
Turboshaft engine but it differed from modern turboshaft engines in having only one turbine to drive both the compressor and the output shaft. It was based on aircraft practice and had six horizontal combustion chambers (spaced radially around the turbine shaft) and no heat exchanger.The emphasis was on power, rather than economy, and the fuel consumption was high. It was designed to use aviation kerosene and was much more expensive to run than No. 18000, which used heavy
fuel oil . The turbine drove, throughreduction gear ing:* three main generators
* one auxiliary generator for battery charging
* one exciter for the main generatorsEach main generator powered two
traction motor s. Unlike No. 18000, there was no auxiliarydiesel engine and the turbine was started by battery power, using the main generators as starter motors.Comparison of 18000 and 18100
The following table gives a comparison between 18000 and 18100. There are some anomalies and these are described in the notes.
Notes:
# In 18000, outputhorsepower is 24% of total horsepower and in 18100, output horsepower is 33% of total horsepower. This suggests that 18100 had the higherthermal efficiency but, in practice, 18000 had the higher thermal efficiency. The horsepower figures should, therefore, be regarded with some scepticism.
# Where electric transmission is used, the horsepower of thetraction motor s is usually 81% (i.e. 90% x 90%) that of the prime mover. The figure for 18100 is therefore about right but the figure for 18000 looks anomalous.Conversion
In early 1958 it was withdrawn from operation and was stored at Swindon Works for a short period before it was returned to Metropolitan Vickers for conversion as a prototype
25 kV AC electric locomotive . As an electric locomotive, it was numbered E1000 (E2001 from 1959) and was given theTOPS classification of class 80.ee also
*
British Rail 18000
*British Rail GT3
*British Rail APT-E External links
* [http://www.railphotoarchive.org/rpc_locodir.php?menu=t&number=18100&class=pro&sort= Rail Photo Archive - 18100]
ources
* Sampson, H. (editor), "The Dumpy Book of Railways of the World", published by Sampson Low, London, date circa 1960
* Robertson, K. (1989). "The Great Western Railway Gas Turbines", published by Alan Sutton, ISBN 0 86299 541 8
*
Wikimedia Foundation. 2010.