Oyster wave energy converter

Oyster wave energy converter

The Oyster is a hydro-electric wave energy device that uses the motion of ocean waves to generate electricity. It is made up of a Power Connector Frame (PCF), which is bolted to the seabed, and a Power Capture Unit (PCU). The PCU is a hinged buoyant flap that moves back and forth with movement of the waves. The movement of the flap drives two hydraulic pistons that feed high-pressured water to an onshore hydro-electric turbine, which drives a generator to make electricity. Oyster is stationed at the European Marine Energy Centre (EMEC) at its Billia Croo site in Orkney, Scotland and is currently the world's largest operating wave energy device.[1]

Aquamarine Power installed Oyster at the EMEC in August 2009. On November 20, 2009, Oyster was officially launched and connected to the National Grid (UK) by the First Minister of Scotland, Alex Salmond.[2]

Current developments are underway to build a more efficient and powerful second-generation device, Oyster 2.[2]

Contents

History

Oyster was developed by Edinburgh-based Aquamarine Power, a company that focuses on wave energy. The concept originated from research at Queen’s University, Belfast, led by professor Trevor Whittaker, Head of the Wave Power Research Centre at Queen's.[3] Aquamarine Power also teamed up with Renewable Technology Ventures Ltd (STVL),[4] a subsidiary of Scottish and Southern Energy (SEE), to fund the Oyster project. Aquamarine Power was able to secure a £6.3m investment from Scottish Enterprise. In addition, Scottish Enterprises awarded Aquamarine Power a £3.15 million grant from the Wave and Tidal Energy: Research, Development and Demonstration Support fund (WATERS).[5] Aquamarine Power also received £1.5m from Sigma Capital Group plc.[6] Altogether, Aquamarine Power was able to raise £11 million to stage this project.[7]

In June 2009, Aquamarine Power signed a £2.5 million contract with Frugo Seacore to install the Oyster device at the European Marine Energy Centre test site at Billia Croo. Oyster was installed 400 metres offshore, west of the Orkney mainland, in 12 metre-deep water.[8] Oyster was installed in August 2009; however it was officially launched on November 20, 2009 by the First Minister of Scotland, Alex Salmond. That same day, Oyster was connected the National Grid (UK) and began generating electricity.[6]

Aquamarine Power hopes to commercialize Oyster and has already signed an agreement with Scottish and Southern Energy to develop up to 1000MW of wave farms by 2020.[7]

Operation

Oyster harnesses the energy of near-shore ocean waves; it was designed to operate in water 10 to 12 metres deep. The Oyster is made up of a Power Connector Frame (PCF) and a Power Capture Unit (PCU). The 36-ton PCF is bolted to the seabed by 1-by-4 meter concrete piles that are drilled 14 metres deep into the seabed. The PCF requires careful and accurate positioning and leveling to compensate for the uneven, rocky seabed. The PCU is a 200-ton, 18-by-12-by-4 metre buoyant flap that is hinged to the PCF. In order to lower the PCU into the water to hinge it to the PCF, 120 tons of seawater must be pumped into ballast tanks within the PCU to provide sufficient negative buoyancy to aid its descent into the water. The PCU is almost entirely submerged underwater; only 2 metres of the device poke above the water. The PCU sways back and forth with the movement of the waves,[8] and this movement of the flap drives two hydraulic pistons that pump high-pressured water through three sub-sea pipeline to an onshore hydro-electric water turbine. The turbine then drives a 315 kW electrical generator, which converts the wave energy into electricity.[9]

The European Marine Energy Centre classifies Oyster as an Oscillating Wave Surge Converter:

This device extracts the energy caused by wave surges and the movement of water particles within them. The arm oscillates as a pendulum mounted on a pivoted joint in response to the movement of water in the waves.[10]

Potential

There are several advantages to using a device like the Oyster:

  • Oyster itself has few moving parts underwater. Its simplicity allows for survivability: in extreme weather conditions, Oyster’s hinged flap can simply move and duck under large waves.[11]
  • Because all of Oyster’s electrical components are located onshore, the hydro-electric generator is accessible for maintenance 24/7. The actual Oyster device is near shore, making it easily accessible, as well.[11]
  • Oyster uses renewable energy from ocean waves to generates clean, zero-emission electricity. This minimizes the environmental risks involved compared to electricity that is produced from fossil fuels. The Carbon Trust estimates that each Oyster device can avoid over 500 tons of carbon dioxide from being released into the atmosphere annually.[12]
  • Aquamarine Power estimates that a farm of 20 Oyster units could produces enough energy to power 9,000 homes.[12]
  • According the Aquamarine Power's CEO Martin McAdam:
"A successful Oyster project would unlock £3-4 million of capital expenditure per MW installed, of which a significant proportion would be invested in the Orkney economy. A commercial wave farm could therefore represent a significant boost to the local economy and would provide long-term skilled jobs for local residents. Ongoing operations and maintenance would generate a further £150,000 per annum to the local economy." [13]
It is esimated that advances in the marine energy industry could provide as many as 12,500 jobs, contributing £2.5 billion to the UK economy by 2020.[13]
  • Aquamarine Power hopes to commercialize and expand the Oyster technology. Ronan Doherty, Chief Technical Officer of Aquamarine Power, found that coastlines off Spain, Portugal, Ireland, Britain, United States, South Africa, Australia and Chile have great wave energy potential and would be ideal places to install Oyster. Doherty predicts that the Oyster market has a £50 billion potential.[12]

Challenges

There are also many disadvantages to using a device like the Oyster:

  • The installation and production of Oyster is difficult and expensive.
    • Oyster weighs over 200 tons; it must be carried out to sea in a large flat-top barge and installed in several stages. First, the PCF is lowered and bolted in the seabed, and it must be accurately positioned and leveled to compensate for the uneven seabed. Then, 120 tons of seawater must be pumped into ballast tanks within the PCU to provide sufficient negative buoyancy to aid its descent into the water to be hinged to the PCF. This complex process involves employing many workers and using expensive equipment.[8]
    • To deploy more Oyster units, new cables will be needed to install the devices into the National Grid.[1]
  • Oyster's offshore turbine and generator can produce noise pollution, thereby disturbing onshore wildlife. However, most of this noise is expected to be masked by the surrounding noise generated by the wind and waves.[14]
  • The installation and operation of the Oyster could interfere with marine mammal life and fish life. The movement of the Oyster device produces underwater noise and vibrations. The noise can mask natural sounds (thus disturbing communication between marine wildlife), produce stress, and cause hearing loss in marine species.[14]
  • Deploying several Oyster units could result in loss of habitat for marine species.[14]

Oyster 2

Current developments are underway to construct an improved, second-generation Oyster device, Oyster 2. In December 2010, Aquamarine Power signed a £4 million contract with Scotland’s leading fabrication contractor Burntisland Fabrications Ltd (BiFab).[15] BiFab began manufacturing Oyster 2 at its manufacturing plant in Methil, Fife, Scotland,[15] and the device is expected to be in full operation by the summer of 2011 at the European Marine Energy Centre.[1]

Aquamarine Power has secured funding from many sources for the development of Oyster 2:

  • In February 2010, Aquamarine Power received a grant of £5.1 million from the Marine Renewables Proving Fund (MRPF), which is funded by the United Kingdom’s Department of Energy and Climate Change and managed by the Carbon Trust.[16]
  • Renewable Technology Ventures Ltd (STVL),[4] a subsidiary of Scottish and Southern Energy (SEE), has invested an additional £2.7 million, bringing its total investment in Aquamarine Power to £19.8 million over the last three years.[17]
  • ABB, the automation and power technology company, has invested £8 million in Aquamarine Power.[17]

Oyster 2 will employ the same basic technology of the original Oyster; however, it will feature a different shape that will maximize the amount of energy that the device is able to capture from the waves.[16] Oyster 2 will consist of three 800 kW flaps that will all be linked to one pipeline leading to an onshore 2.4 MW hydro-electric generator.[16] Each flap will measure 26 metres, making it 50% larger than the original Oyster.[15] Oyster 2 will also have a 250% greater power output.[15] Aquamarine Power estimates that a small farm of 20 Oyster 2 devices will be capable of supplying enough electricity for over 12,000 homes, compared to the 9,000 homes the original Oyster is capable of powering.[18]

See also

External links

References

  1. ^ a b c "Aquamarine Power: £5.1m for wave device Oyster 2". Renewable Energy Focus. Retrieved 2011-01-25
  2. ^ a b "Oyster 1". Aquamarine Power. Retrieved 2011-01-24
  3. ^ "Queen's Energy Partnership Makes Waves for UK". Queen's University Belfast. Retrieved 2011-01-31
  4. ^ a b Case Study: Aquamarine Power Limited”. Scottish and Southern Energy. Retrieved 2011-01-31
  5. ^ "Winners of WATERS Grant Announced". Scottish Enterprise. Retrieved 2011-01-31
  6. ^ a b "Scotland's First Minister Launches Oyster". Aquamarine Power -- News and Events. Retrieved 2011-02-02
  7. ^ a b Jones, Peter. "Wave Machine to Power Homes". The Sunday Times (UK). Retrieved 2011-02-01
  8. ^ a b c "Oyster Wave Energy Converter Installation". Fugro Seacore. Retrieved 2011-01-01
  9. ^ "Technology Profile". US Department of Energy. Retrieved 2011-01-26
  10. ^ " Wave Energy Devices". European Marine Energy Centre. Retrieved 2011-01-29
  11. ^ a b "Oyster Wave Power -- How It Works". Aquamarine Power. Retrieved 2011-01-25
  12. ^ a b c Bayani, Oliver M. "New Oyster Device Promises More Wave Energy Output". Ecoseed. Retrieved 2011-02-01
  13. ^ a b "Oyster Generates £1M for Orkney Economy". Aquamarine Power --News and Events. Retrieved 2011-01-30.
  14. ^ a b c Cruz, Joao (2008). Ocean Wave Energy: Current Status and Future Perspectives, p.409-411. Springer-Verlag, Berlin. ISBN 9783540748946
  15. ^ a b c d “Aquamarine Power Awards £4 million Oyster 2 Contract to BiFab”. Aquamarine Power – News and Events. Retrieved 2011-01-30
  16. ^ a b c “Oyster 2”. Aquamarine Power. Retrieved 2011-01-25
  17. ^ a b “Investment in Aquamarine Power”. Scottish and Southern Energy. Retrieved 2011-01-31
  18. ^ Nusca, Andrew. “Aquamarine Power’s Oyster 2: Can It Help Wave Energy Go Commercial?” Smart Planet. Retrieved 2011-01-27

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Oyster (disambiguation) — An oyster is a bivalve mollusc. Oyster may also refer to: Oyster (album), by Heather Nova Oyster (novel), by Janette Turner Hospital Oyster (magazine) Oyster (fowl), a cut of poultry The Oyster, a Victorian erotic magazine Oyster card, a smart… …   Wikipedia

  • Orkney Wave Power Station — Orkney Wave Power Station …   Wikipedia

  • European Marine Energy Centre — The European Marine Energy Centre (EMEC) is a Scottish Government backed research facility based in Stromness, Orkney that has installed a wave power testing system at Billia Croo on the Orkney mainland and a tidal power testing station on the… …   Wikipedia

  • North Sea — For other uses, see North Sea (disambiguation). North Sea Location Atlantic Ocean Coordinates …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”