Core (optical fiber)

Core (optical fiber)
The structure of a typical single-mode fiber.
1. Core 8 µm diameter
2. Cladding 125 µm dia.
3. Buffer 250 µm dia.
4. Jacket 400 µm dia.
Light propagating in a multi-mode fiber

The core of a conventional optical fiber is a cylinder of glass or plastic that runs along the fiber's length. The core is surrounded by a medium with a lower index of refraction, typically a cladding of a different glass, or plastic. Light travelling in the core reflects from the core-cladding boundary due to total internal reflection, as long as the angle between the light and the boundary is less than the critical angle. As a result, the fiber transmits all rays that enter the fiber with a sufficiently small angle to the fiber's axis. The limiting angle is called the acceptance angle, and the rays that are confined by the core/cladding boundary are called guided rays.

The core is characterized by its diameter or cross-sectional area. In most cases the core's cross-section should be circular, but the diameter is more rigorously defined as the average of the diameters of the smallest circle that can be circumscribed about the core-cladding boundary, and the largest circle that can be inscribed within the core-cladding boundary. This allows for deviations from circularity due to manufacturing variation.

Another commonly-quoted statistic for core size is the mode field diameter. This is the diameter at which the intensity of light in the fiber falls to some specified fraction of maximum (usually 1/e2≈13.5%). For single-mode fiber, the mode field diameter is larger than the physical diameter of the core, because the light penetrates slightly into the cladding as an evanescent wave.

See also


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Buffer (optical fiber) — In a fiber optic cable, a buffer is one type of component used to encapsulate one or more optical fibers for the purpose of providing such functions as mechanical isolation, protection from physical damage and fiber identification. The buffer may …   Wikipedia

  • Optical fiber — A bundle of optical fibers A TOSLINK fiber optic audio c …   Wikipedia

  • Optical fiber connector — An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose… …   Wikipedia

  • Optical fiber cable — A TOSLINK optical fiber cable with a clear jacket. These plastic fiber cables are used mainly for digital audio connections between devices. An optical fiber cable is a cable containing one or more optical fibers. The optical fiber elements are… …   Wikipedia

  • Plastic optical fiber — (POF) (or fibre) is an optical fiber which is made out of plastic. Traditionally PMMA (acrylic) is the core material, and fluorinated polymers are the cladding material. Since the late 1990s however, much higher performance POF based on… …   Wikipedia

  • Multi-mode optical fiber — A 1.25 Gbit/s multi mode fiber Multi mode optical fiber (multimode fiber or MM fiber or fibre) is a type of optical fiber mostly used for communication over short distances, such as within a building or on a campus. Typical multimode links… …   Wikipedia

  • Single-mode optical fiber — In fiber optic communication, a single mode optical fiber (SMF) is an optical fiber designed to carry only a single ray of light (mode). This ray of light often contains a variety of different wavelengths. Although the ray travels parallel to the …   Wikipedia

  • Polarization-maintaining optical fiber — In fiber optics, polarization maintaining optical fiber (PMF or PM fiber) is optical fiber in which the polarization of linearly polarized light waves launched into the fiber is maintained during propagation, with little or no cross coupling of… …   Wikipedia

  • Core — may refer to: Contents 1 Science and Academics 2 Computers and Technology 3 Media …   Wikipedia

  • Optical tweezers — (originally called single beam gradient force trap ) are scientific instruments that use a highly focused laser beam to provide an attractive or repulsive force (typically on the order of piconewtons), depending on the refractive index mismatch… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”