Teflon-coated bullet

Teflon-coated bullet

Teflon-coated bullets, colloquially known as "cop killer bullets", are bullets that have been covered with a coating of polytetrafluoroethylene.

Contents

History

In the 1960s, Paul Kopsch (an Ohio coroner), Daniel Turcos (a police sergeant), and Donald Ward (Kopsch's special investigator), began experimenting with special purpose handgun ammunition. Their objective was to develop a law enforcement round capable of improved penetration against hard targets, such as windshield glass and automobile doors. Conventional bullets, made primarily from lead, often become deformed and less effective after striking hard targets, especially when fired at handgun velocities. The inventors named their company "KTW," after their initials.

After some experimentation with sintered tungsten-alloy rounds, which were eventually abandoned due to supply and cost concerns, the inventors settled on a bullet consisting mostly of hardened brass with a steel core. In testing, the bullets wore out barrels far more quickly than normal copper-jacketed lead rounds, since they did not deform to fit the rifling.[1] In an effort to reduce barrel wear, the bullets were then coated with a layer of Teflon. The inventors had also noted that the tips of canes were frequently covered with the relatively soft Teflon to help them grip surfaces. KTW stated that the addition of Teflon helped to prevent bullet deflection off of doors and windshields, reducing the risk of dangerous ricochets and improving penetration against these surfaces.[2][3]

The production of KTW-brand ammunition ceased in the 1990s. However, some manufacturers continue to coat their bullets with various compounds, notably molybdenum disulfide, as a protective layer against barrel wear, and to reduce the amount of lead given off as dust when shooting in indoor ranges.

Controversy

In 1982, NBC ran a television special on the bullets (against the requests of many police organizations) and argued that the bullets were a threat to police. Gun control organizations in the U.S. labeled Teflon-coated bullets "cop killers" because of the supposedly increased penetration the bullets offered against ballistic vests, a staple of the American police uniform. Many erroneously focused on the Teflon coating as the source of the bullets' supposedly increased penetration, rather than the hardness of the metals used. A common misconception, often perpetuated by films and television, is that coating normal bullets with Teflon will give them armor-piercing capabilities. In reality, Teflon and similar coatings were used primarily as a means to protect the gun barrel from the hardened bullet; the coating itself does not add any measurable armor-piercing abilities to otherwise normal ammunition.

The round in question could, in fact, penetrate a police vest. However, as Kopsch pointed out in a 1990 interview, "adding a teflon coating to the round added 20% penetration power on metal and glass. Critics kept complaining about teflon's ability to penetrate body armor... In fact, teflon cut down on the round's ability to cut through the nylon or kevlar of body armor." [2]

Legal status

United States

The federal ban on pistol armor-piercing ammunition uses only the composition of the bullet's core to determine legality.[4] However, many states have legislation restricting various kinds of coating materials. For example:

Teflon coated bullets are illegal in Oklahoma under some circumstances.

See also

References

  1. http://www.guncite.com/gun_control_gcgvcopk.html
  2. http://www.alphadogweb.com/firearms/copkillerbullets.htm
  3. http://www.nationalreview.com/kopel/kopel200403010926.asp

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Teflon coated bullet — Teflon coated bullets are handgun bullets that have been covered with a coating of Teflon to reduce barrel wear. Molybdenum disulfide is also sometimes used as a coating.HistoryIn the 1960s, Paul Kopsch (an Ohio coroner), Daniel Turcos (a police… …   Wikipedia

  • Bullet — This article is about firearms projectiles. For other uses, see Bullet (disambiguation). Lead soft point, boat tailed, copper jacketed bullets A bullet is a projectile propelled by a firearm, sling, or air gun. Bullets do not normally contain… …   Wikipedia

  • Hollow-point bullet — A hollow point is a bullet that has a pit or hollowed out shape in its tip, generally intended to cause the bullet to expand upon entering a target in order to decrease penetration and disrupt more tissue as it travels through the target. As a… …   Wikipedia

  • Armor-piercing shot and shell — [ thumb|right|250px|Armour piercing shell of the APBC 1 Light weight ballistic cap 2 Steel alloy piercing shell 3 Desensitized bursting charge (TNT, Trinitrophenol, RDX...) 4 Fuse (set with delay to explode inside the target) 5 Bourrelet (front)… …   Wikipedia

  • Fiocchi Munizioni — (Fiocchi Ammunition) is one of Italy s largest and oldest manufacturers of ammunitions.The Company s headquarters and main production plant are in Via Santa Barbara in Lecco, Italy. History Fiocchi Munizioni was founded on 3rd July 1876 in Lecco …   Wikipedia

  • KTW — could refer to:* Kato language; ISO 639 3 code KTW. * Katowice International Airport, Poland; IATA airport code KTW. * Kentish Town West railway station, England; National Rail station code KTW. * KTW; a manufacturer of Classic airsoft guns. *… …   Wikipedia

  • cop-killer — noun a Teflon coated bullet …   Wiktionary

  • Uncle Fester (author) — For the character in The Addams Family, see Uncle Fester Uncle Fester is the author of such controversial books as Secrets of Methamphetamine Manufacture, and Silent Death. hort bio Uncle Fester is the nom de plume used by Steve Preisler to write …   Wikipedia

  • Top Fuel — Racing is a class of drag racing in which the cars are run on a maximum of 90% nitromethane and about 10% methanol (also known as racing alcohol), instead of gasoline. The cars are purpose built race cars, with a layout superficially resembling… …   Wikipedia

  • Polytetrafluoroethylene — chembox ImageFile = Teflon structure.png ImageSize = 130px ImageFile1 = PTFE 3D vdW.png ImageSize1 = 250px IUPACName = Poly(tetrafluoroethene) SystematicName = Poly(tetrafluoroethylene) OtherNames = Teflon Section1 = Chembox Identifiers… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”