Clinton County Air Force Base

Clinton County Air Force Base
Clinton County Air Force Base
Airborne Airpark - USGS 22 March 1994.jpg
USGS aerial image as of 22 March 1994
IATA: ILNICAO: KILNFAA LID: ILN
Summary
Airport type Military
Owner United States Air Force
Location Union Township, Clinton County, near Wilmington, Ohio
Elevation AMSL 1,077 ft / 328 m
Coordinates 39°25′41″N 083°47′32″W / 39.42806°N 83.79222°W / 39.42806; -83.79222
Runways
Direction Length Surface
ft m
4L/22R 10,701 3,262 Concrete
13/31 5,984 1,824 Concrete
Source: Federal Aviation Administration[1]

Clinton County Air Force Base (IATA: ILNICAO: KILNFAA LID: ILN) was a United States Air Force base located two nautical miles (3.7 km) southeast of the central business district of Wilmington, a city in Clinton County, Ohio, United States.

Contents

History

The airport opened in 1929 and a small hangar was built in 1930. The landing strip was approved by the Civil Works Administration in 1933. In 1940, the Civil Aeronautics Authority took control of Wilmington Airport for use as an emergency landing field. In 1942, the Army Air Corps took over the airport, renaming it Clinton County Army Air Field. The Air Material Command the airfield for glider research, training and development until the end of World War II.[2]

The airfield was closed after World War II, but reopened during the Korean War. By 1958, the Clinton County Air Force Base was home to the newly created 249th Air Reserve Training Wing. The runway was extended from 6,000 to 9,000 feet in 1960. The air force base was closed in 1971 and its operations were transferred to Lockbourne Air Force Base in Columbus.[2]

The base was decommissioned in 1972 and the Community Improvement Corporation (CIC) began developing the area as the Wilmington Industrial Air Park (WIAP). It also became home to the Great Oaks Joint Vocational School District. In 1977, the Southern State Community College opened, using old barracks buildings as classrooms. In 1980, Midwest Air Charter was acquired by Airborne Freight Corporation, resulting in Airborne Express, which became the largest tenant at WIAP and resulted in the airfield being named Airborne Airpark.[2]

See also

References

  1. ^ FAA Airport Master Record for ILN (Form 5010 PDF), effective 2009-08-27.
  2. ^ a b c ABX Air: Air Park History

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Clinton-Sherman Air Force Base — Part of Strategic Air Command Located near: Burns Flat, Oklahoma …   Wikipedia

  • Minot Air Force Base — Part of Air Force Global Strike Command (AFGSC) Located near: Minot, North Dakota …   Wikipedia

  • Mountain Home Air Force Base — Part of Air Combat Command (ACC) Located near: Mountain Home, Idaho …   Wikipedia

  • Davis–Monthan Air Force Base — Part of Air Combat Command (ACC) Located near: Tucson, AZ …   Wikipedia

  • Grand Forks Air Force Base — Infobox Airport name = Grand Forks Air Force Base nativename = nobold|Part of Air Mobility Command (AMC) image width = 250 caption = USGS aerial photo as of 17 September 1997 IATA = RDR ICAO = KRDR FAA = RDR type = Military: Air Force Base owner …   Wikipedia

  • Fairchild Air Force Base — Part of Air Mobility Command (AMC) Located near: Spokane, Washington …   Wikipedia

  • Plattsburgh Air Force Base — PAFB redirects here. For the military airport in Alaska with that ICAO code, see Ladd Army Airfield. For the civil use of this facility and airport information, see Plattsburgh International Airport. Plattsburgh Air Force Base …   Wikipedia

  • Robins Air Force Base — Part of Air Force Materiel Command (AFMC) Located near: Warner Robins, Georgia …   Wikipedia

  • Offutt Air Force Base — This article is about Offutt Air Force Base. For other uses of Offutt, see Offutt (disambiguation). Offutt Air Force Base Part of Air Combat Command (ACC) …   Wikipedia

  • Malmstrom Air Force Base — Part of Air Force Global Strike Command (AFGSC) Located near: Great Falls, Montana …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”