- Paper size
-
Many paper size standards conventions have existed at different times and in different countries. Today there is one widespread international ISO standard (including A4, B3, C4, etc.) and a localised standard used in North America (including letter, legal, ledger, etc.). The paper sizes affect writing paper, stationery, cards, and some printed documents. The standards also have related sizes for envelopes.
Contents
The international standard: ISO 216
Main article: ISO 216The international paper size standard, ISO 216, is based on the German DIN 476 standard for paper sizes. ISO paper sizes are all based on a single aspect ratio of square root of 2, or approximately 1:1.4142. The base A0 size of paper is defined to have an area of one m². With the given aspect ratio of square root of two, this corresponds to a piece of paper with a longer side of one metre multiplied by the square root of the square root (that is, the fourth root) of two and the shorter side being the reciprocal of this value. Rounded to millimetres the A0 paper size is 841 by 1,189 millimetres (33.1 × 46.8 in).
Successive paper sizes in the series A1, A2, A3, and so forth, are defined by halving the preceding paper size along the larger dimension. The most frequently used paper size is A4 (210 × 297 mm).
The significant advantage of this system is its scaling: if a sheet with an aspect ratio of is divided into two equal halves parallel to its shortest sides, then the halves will again have an aspect ratio of . Folded brochures of any size can be made by using sheets of the next larger size, e.g. A4 sheets are folded to make A5 brochures. The system allows scaling without compromising the aspect ratio from one size to another—as provided by office photocopiers, e.g. enlarging A4 to A3 or reducing A3 to A4. Similarly, two sheets of A4 can be scaled down and fit exactly 1 sheet without any cutoff or margins. Weights are easy to calculate as well: a standard A4 sheet made from 80 gram/m² paper weighs 5 grams (as it is one 16th of an A0 page, measuring 1 m²), allowing one to easily compute the weight—and associated postage rate—by counting the number of sheets used.
The advantages of basing a paper size upon an aspect ratio of were already noted in 1786 by the German scientist and philosopher Georg Christoph Lichtenberg.[1] Early in the 20th century, Dr Walter Porstmann turned Lichtenberg's idea into a proper system of different paper sizes. Porstmann's system was introduced as a DIN standard (DIN 476) in Germany in 1922, replacing a vast variety of other paper formats. Even today the paper sizes are called "DIN A4" in everyday use in Europe. The term Lichtenberg ratio has recently been proposed for this paper aspect ratio.
The main disadvantage of the system is type does not scale the same way; therefore, when a page is resized, the type set on it loses legibility as the proportion between the type's x-height, page margins, and leading are distorted. When trim is involved, as in the manufacture of books, ISO 216 sizes are generally too tall and narrow for book production (see: Canons of page construction). The distortion is even more pronounced with printed sheet music. European book publishers typically use metricated traditional page sizes for book production.
The DIN 476 standard spread quickly to other countries. Before the outbreak of World War II, it had been adopted by the following countries:
- Belgium (1924)
- Netherlands (1925)
- Norway (1926)
- Finland (1927)
- Switzerland (1929)
- Sweden (1930)
- Soviet Union (1934)
- Hungary (1938)
- Italy (1939)
During World War II, the standard was adopted by Uruguay (1942), Argentina (1943) and Brazil (1943); and afterwards spread to other countries:
- United Kingdom (1959)
- Ireland (1959)
- Venezuela (1962)
- New Zealand (1963)
- Iceland (1964)
- Mexico (1965)
- South Africa (1966)
- France (1967)
- Peru (1967)
- Turkey (1967)
- Chile (1968)
By 1975 so many countries were using the German system that it was established as an ISO standard, as well as the official United Nations document format. By 1977 A4 was the standard letter format in 88 of 148 countries. Today the standard has been adopted by all countries in the world except the United States and Canada. In Mexico, Colombia, Venezuela, Argentina, Chile and the Philippines the US letter format is still in common use, despite their official adoption of the ISO standard.
In addition to the A series, there is a less common B series. The area of B series sheets is the geometric mean of successive A series sheets. So, B1 is between A0 and A1 in size, with an area of 0.707 m² ( m²). As a result, B0 is 1 metre wide, and other sizes in the B series are a half, a quarter or further fractions of a metre wide. While less common in office use, it is used for a variety of special situations. Many posters use B-series paper or a close approximation, such as 50 cm×70 cm; B5 is a relatively common choice for books. The B series is also used for envelopes and passports.
The C series is used only for envelopes and is defined in ISO 269. The area of C series sheets is the geometric mean of the areas of the A and B series sheets of the same number; for instance, the area of a C4 sheet is the geometric mean of the areas of an A4 sheet and a B4 sheet. This means that C4 is slightly larger than A4, and B4 slightly larger than C4. The practical usage of this is that a letter written on A4 paper fits inside a C4 envelope, and a C4 envelope fits inside a B4 envelope.
ISO paper sizes (plus rounded inch values) Format A series B series C series Size mm × mm in × in mm × mm in × in mm × mm in × in 0 841 × 1189 33.11 × 46.81 1000 × 1414 39.37 × 55.67 917 × 1297 36.10 × 51.06 1 594 × 841 23.39 × 33.11 707 × 1000 27.83 × 39.37 648 × 917 25.51 × 36.10 2 420 × 594 16.54 × 23.39 500 × 707 19.69 × 27.83 458 × 648 18.03 × 25.51 3 297 × 420 11.69 × 16.54 353 × 500 13.90 × 19.69 324 × 458 12.76 × 18.03 4 210 × 297 8.27 × 11.69 250 × 353 9.84 × 13.90 229 × 324 9.02 × 12.76 5 148 × 210 5.83 × 8.27 176 × 250 6.93 × 9.84 162 × 229 6.38 × 9.02 6 105 × 148 4.13 × 5.83 125 × 176 4.92 × 6.93 114 × 162 4.49 × 6.38 7 74 × 105 2.91 × 4.13 88 × 125 3.46 × 4.92 81 × 114 3.19 × 4.49 8 52 × 74 2.05 × 2.91 62 × 88 2.44 × 3.46 57 × 81 2.24 × 3.19 9 37 × 52 1.46 × 2.05 44 × 62 1.73 × 2.44 40 × 57 1.57 × 2.24 10 26 × 37 1.02 × 1.46 31 × 44 1.22 × 1.73 28 × 40 1.10 × 1.57 The tolerances specified in the standard are
- ±1.5 mm (0.06 in) for dimensions up to 150 mm (5.9 in),
- ±2 mm (0.08 in) for lengths in the range 150 to 600 mm (5.9 to 23.6 in) and
- ±3 mm (0.12 in) for any dimension above 600 mm (23.6 in).
German extensions
The German standard DIN 476 was published in 1922 and is the original specification of the A and B sizes. It differs in two details from its international successor:
DIN 476 provides an extension to formats larger than A0, denoted by a prefix factor. In particular, it lists the two formats 2A0, which is twice the area of A0, and 4A0, which is four times A0:
DIN 476 overformats Name mm × mm in × in 4A0 1682 × 2378 66.22 × 93.62 2A0 1189 × 1682 46.81 × 66.22 DIN 476 also specifies slightly tighter tolerances:
- ±1 mm (0.04 in) for dimensions up to 150 mm (5.9 in),
- ±1.5 mm (0.06 in) for lengths in the range 150 mm to 600 mm (5.9 to 23.6 in) and
- ±2 mm (0.08 in) for any dimension above 600 mm (23.6 in).
Swedish extensions
The Swedish standard SIS 014711 generalized the ISO system of A, B, and C formats by adding D, E, F, and G formats to it. Its D format sits between a B format and the next larger A format (just like C sits between A and the next larger B). The remaining formats fit in between all these formats, such that the sequence of formats A4, E4, C4, G4, B4, F4, D4, H4, A3 is a geometric progression, in which the dimensions grow by a factor 21/16 from one size to the next. However, the SIS 014711 standard does not define any size between a D format and the next larger A format (called H in the previous example). Of these additional formats, G5 (169 × 239 mm) and E5 (155 × 220 mm) are popular in Sweden for printing dissertations,[citation needed] but the other formats have not turned out to be particularly useful in practice and they have not been adopted internationally.
Japanese B-series variant
The JIS defines two main series of paper sizes. The JIS A-series is identical to the ISO A-series, but with slightly different tolerances. The area of B-series paper is 1.5 times that of the corresponding A-paper (instead of the factor 1.414... for the ISO B-series), so the length ratio is approximately 1.22 times the length of the corresponding A-series paper. The aspect ratio of the paper is the same as for A-series paper. Both A- and B-series paper is widely available in Japan, Taiwan and China, and most photocopiers are loaded with at least A4 and either one of A3, B4 and B5 paper.
There are also a number of traditional paper sizes, which are now used mostly only by printers. The most common of these old series are the Shiroku-ban and the Kiku paper sizes.
JIS paper sizes (plus rounded inch values) Format B series Shiroku ban Kiku Size mm × mm in × in mm × mm in × in mm × mm in × in 0 1030 × 1456 40.55 × 57.32 1 728 × 1030 28.66 × 40.55 2 515 × 728 20.28 × 28.66 3 364 × 515 14.33 × 20.28 4 257 × 364 10.12 × 14.33 264 × 379 10.39 × 14.92 227 × 306 8.94 × 12.05 5 182 × 257 7.17 × 10.12 189 × 262 7.44 × 10.31 151 × 227 5.94 × 8.94 6 128 × 182 5.04 × 7.17 127 × 188 5.00 × 7.40 7 91 × 128 3.58 × 5.04 8 64 × 91 2.52 × 3.58 9 45 × 64 1.77 × 2.52 10 32 × 45 1.26 × 1.77 11 22 × 32 0.87 × 1.26 12 16 × 22 0.63 × 0.87 Colombian common sizes naming
The most common paper sizes used for commercial and industrial printing in Colombia are the ISO B1, B2 and B3 and are referred to as pliego, ¹⁄₂ pliego and ¹⁄₄ pliego respectively
North American paper sizes
Loose sizes
Current standard sizes of U.S., Canadian and Mexican paper are a subset of the traditional sizes referred to below. "Letter", "legal", "ledger", and "tabloid" are by far the most commonly used of these for everyday activities. The origins of the exact dimensions of "letter" size paper (8 × 11 in or 215.9 × 279.4 mm) are lost in tradition and not well documented. The American Forest and Paper Association argues that the dimension originates from the days of manual paper making, and that the 11 inch length of the page is about a quarter of "the average maximum stretch of an experienced vatman's arms." 1⁄2[2] However, this does not explain the width or aspect ratio. Outside of North America, Letter size is also known as "American Quarto"[3] and the size is indeed almost exactly a quarter of the old Imperial (British) paper size known as Demy 4to (17½"×22½"), allowing ½" for trimming.[4]
North American paper sizes Size in × in mm × mm Letter 8.5 × 11 216 × 279 Legal 8.5 × 14 216 × 356 Junior Legal 8.0 × 5.0 203 × 127 Ledger[5] 17 × 11 432 × 279 Tabloid 11 × 17 279 × 432 There is an additional paper size, to which the name "government-letter" was given by the IEEE Printer Working Group: the 8 × 10 in (203.2 × 266.7 mm) paper that is used in the United States and Canada for children's writing. It was prescribed by 1⁄2Herbert Hoover when he was Secretary of Commerce to be used for U.S. government forms, apparently to enable discounts from the purchase of paper for schools. In later years, as photocopy machines proliferated, citizens wanted to make photocopies of the forms, but the machines did not generally have this size paper in their bins. Ronald Reagan therefore had the U.S. government switch to regular letter size (8 × 11 in/215.9 × 279.4 mm). 1⁄2[2] The 8 × 10 in (203.2 × 266.7 mm) size is still commonly used in spiral-bound 1⁄2notebooks and the like.
U.S. paper sizes are currently standard in the United States, the Philippines and Chile. The latter two use U.S. "letter", but the Philippine and Chilean "legal" size is 8 × 13 in (215.9 × 330.2 mm). 1⁄2[6] ISO sizes are available, but not widely used, in both the U.S. and the Philippines.
In Canada, U.S. paper sizes are a de facto standard. The government, however, uses a combination of ISO paper sizes, and CAN 2-9.60M "Paper Sizes for Correspondence" specifies P1 through P6 paper sizes, which are the U.S. paper sizes rounded to the nearest 5 mm.[7]
Mexico has adopted the ISO standard, but U.S. "letter" format is still the system in use throughout the country. It is virtually impossible to encounter ISO standard papers in day-to-day uses, with "Carta 216 mm × 279 mm" (letter), "Oficio 216 mm × 340 mm" (legal) and "Doble carta" (ledger/tabloid) being nearly universal. U.S. sizes are also widespread and in common use in Colombia.[8]
ANSI paper sizes
In 1996, the American National Standards Institute adopted ANSI/ASME Y14.1 which defined a regular series of paper sizes based upon the de facto standard 8 × 11 in (215.9 × 279.4 mm) "letter" size which it assigned "ANSI A". This series also includes "ledger"/"tabloid" as "ANSI B". This series is somewhat similar to the ISO standard in that cutting a sheet in half would produce two sheets of the next smaller size. Unlike the ISO standard, however, the arbitrary aspect ratio forces this series to have two alternating aspect ratios. The ANSI series is shown below. 1⁄2
With care, documents can be prepared so that the text and images fit on either ANSI or their equivalent ISO sheets at 1:1 reproduction scale.
Name in × in mm × mm Ratio Alias Similar ISO A size ANSI A 8½ × 11 216 × 279 1.2941 Letter A4 ANSI B 17 × 11
11 × 17432 × 279
279 × 4321.5455 Ledger[5]
TabloidA3 ANSI C 17 × 22 432 × 559 1.2941 A2 ANSI D 22 × 34 559 × 864 1.5455 A1 ANSI E 34 × 44 864 × 1118 1.2941 A0 Other, larger sizes continuing the alphabetic series illustrated above exist, but it should be noted that they are not part of the series per se, because they do not exhibit the same aspect ratios. For example, Engineering F size (28 × 40 in or 711.2 × 1,016.0 mm) also exists, but is rarely encountered, as are G, H, ... N size drawings. G size is 22 in (571.5 mm) high, but variable width up to 90 in (2,286 mm) in increments of 1⁄28 in (215.9 mm), i.e., roll format. H and larger letter sizes are also roll formats. Such sheets were at one time used for full-scale layouts of aircraft parts, wiring harnesses and the like, but are slowly being phased out, due to widespread use of 1⁄2computer-aided design (CAD) and computer-aided manufacturing (CAM).
Architectural sizes
In addition to the ANSI system as listed above, there is a corresponding series of paper sizes used for architectural purposes. This system has also been adapted by the entertainment industry for the purposes of entertainment drafting. This series also shares the property that bisecting each size produces two of the size below.[9] It may be preferred by North American architects because the aspect ratios (4:3 and 3:2) are ratios of small integers, unlike their ANSI (or ISO) counterparts. Furthermore, the aspect ratio 4:3 matches the traditional aspect ratio for computer displays.[9] The architectural series, usually abbreviated "Arch", is shown below:
Name in × in mm × mm Ratio Arch A 9 × 12 229 × 305 3:4 Arch B 12 × 18 305 × 457 2:3 Arch C 18 × 24 457 × 610 3:4 Arch D 24 × 36 610 × 914 2:3 Arch E 36 × 48 914 × 1219 3:4 Arch E1 30 × 42 762 × 1067 5:7 Arch E2 26 x 38 660 x 965 13:19 Arch E3 27 x 39 686 x 991 9:13 Other sizes
Name in × in mm × mm Ratio dot x dot Organizer J 2.75 × 5 70 × 127 ~1.8142 Compact 4.25 × 6.75 108 × 171 1.5833 Organizer L, Statement, Half Letter, Memo, Jepps* 5.5 × 8.5 140 × 216 1.54 Executive, Monarch 7.25 × 10.5 184 × 267 ~1.4483 Government-Letter 8 × 10.5 203 × 267 1.3125 Foolscap, Folio[5] 8.27 × 13 210 × 330 1.625 Letter, Organizer M 8.5 × 11 216 × 279 ~1.2941 Fanfold 12x8.5, German Std Fanfold 8.5 × 12 216 × 304 1.407 612 × 864 Government-Legal, Folio 8.5 × 13 216 × 330 ~1.5294 Legal, Monarch? 8.5 × 14 216 × 356 1.6481 Quarto 9 × 11 229 × 279 1.2 US Std Fanfold 11 × 14.875 279 × 377 ~1.3513 792 × 1071 Ledger, Tabloid, Organizer K, Bible 11 × 17 279 × 432 1.54 Super-B 13 × 19 330 × 483 ~1.4615 Post 15.5 × 19.5 394 × 489 ~1.2581 Crown 15 × 20 381 × 508 1.3 Large Post 16.5 × 21 419 × 533 1.27 Demy 17.5 × 22.5 445 × 572 ~1.2857 Medium 18 × 23 457 × 584 1.27 Broadsheet 18 × 24 457 × 610 1.3 Royal 20 × 25 508 × 635 1.25 Elephant 23 × 28 584 × 711 ~1.2174 Double Demy 22.5 × 35 572 × 889 1.5 Quad Demy 35 × 45 889 × 1143 ~1.2857 Personal Organizers and Other Corporations[10][11] Company Name Paper Size in x in (Various hole sizes) Filofax M2 103 x 64 mm with 3 holes Mini 105 x 67 mm with 5 holes Pocket 120 x 81 mm with 6 holes Personal 171 x 95 mm with 6 holes Slimline 171 x 95 mm with 6 holes A5 210 x 148 mm with 6 holes Deskfax (B5) 250 × 176 mm with 9 holes A4 297 x 210 mm with 4 holes Franklin Planner Micro 2⅝ x 4¼ (66.675 x 108 mm) Pocket 3½ x 6 (89 x 152 mm) Compact 4¼ x 6¾ (108 x 171 mm) Classic 5½ x 8½ (140 x 216 mm) Monarch 8½ x 11 (216 x 280 mm) *Jeppesen Aeronautical Charts Jeppesen Chart 5½ x 8½ (140 x 216 mm) 7 holes FAA Aeronautical Charts FAA Chart 5½ x 8½ (140 x 216 mm) 3 holes at top Index and business cards Name in × in mm × mm Ratio Index card 3 × 5 76 × 127 1.6 Index card 4 × 6 102 × 152 1.5 Index card 5 × 8 127 × 203 1.6 International business card * 2⅛ × 3.37 53.98 × 85.6 1.586 US business card 2 × 3.5 51 × 89 1.75 Japanese business card ~2.165 × ~3.583 55 × 91 ~1.65 Hungarian business card ~1.969 × ~3.543 50 × 90 1.8 * This is the same size as the smallest rectangle containing a credit card. However, credit card size, as defined in ISO/IEC 7810, also specifies rounded corners and thickness.
Photograph sizes Name in × in mm × mm Ratio 2R 2.5 × 3.5 64 × 89 1.4 - 3 × 5 76 × 127 1.6 LD, DSC 3.5 × 4.67 89 × 119 1.3 (4:3) 3R, L 3.5 × 5 89 × 127 ~1.4286 LW 3.5 × 5.25 89 × 133 1.5 (3:2) KGD 4 × 5.33 102 × 136 1.3 (4:3) 4R, KG 4 × 6 102 × 152 1.5 (3:2) 2LD, DSCW 5 × 6.67 127 × 169 1.3 (4:3) 5R, 2L 5 × 7 127 × 178 1.4 2LW 5 × 7.5 127 × 190 1.5 (3:2) 6R 6 × 8 152 × 203 1.3 (4:3) 8R, 6P 8 × 10 203 × 254 1.25 S8R, 6PW 8 × 12 203 × 305 1.5 (3:2) 11R 11 × 14 279 × 356 1.27 A3+, Super B 13 × 19 330 × 483 ~1.46154 Postcard size limitations Dimension Minimum (inch) Maximum (inch) Height 3.5 4.25 Width 5.0 6.0 Thickness 0.007 0.016 Tablet sizes
See also: NotebookThe sizes listed above are for paper sold loosely in reams. There are many sizes of tablets of paper, that is, sheets of paper bound at one edge, usually by a strip of plastic or hardened PVA adhesive. Often there is a pad of cardboard (also known as chipboard or greyboard) at the bottom of the stack. Such a tablet serves as a portable writing surface, and the sheets often have lines printed on them, usually in blue, to make writing in a line easier. An older means of binding is to have the sheets stapled to the cardboard along the top of the tablet; there is a line of perforated holes across every page just below the top edge from which any page may be torn off. Lastly, a pad of sheets each weakly stuck with adhesive to the sheet below, trademarked as "Post-It" or "Stick-Em" and available in various sizes, serve as a sort of tablet.
"Letter pads" are 8 by 11 inches (215.9 by 279.4 mm), while the term "legal pad" is often used by laymen to refer to pads of various sizes including those of 1⁄28 by 14 inches (215.9 by 355.6 mm). There are "steno pads" (used by stenographers) of 6 by 9 inches (152.4 by 228.6 mm). 1⁄2
In countries where the ISO sizes are standard, most notebooks and tablets are sized to ISO specifications (for example, most newsagents in Australia stock A4 and A3 tablets).
Traditional inch-based paper sizes
Traditionally, a number of different sizes were defined for large sheets of paper, and paper sizes were defined by the sheet name and the number of times it had been folded. Thus a full sheet of "royal" paper was 25 × 20 inches, and "royal octavo" was this size folded three times, so as to make eight sheets, and was thus 10 by 6¼ inches.
Imperial sizes were used in the United Kingdom and its territories. Some of the base sizes were as follows:
Name in × in mm × mm Ratio Emperor 48 × 72 1219 × 1829 1.5 Antiquarian 31 × 53 787 × 1346 1.7097 Grand eagle 28.75 × 42 730 × 1067 1.4609 Double elephant 26.75 × 40 678 × 1016 1.4984 Atlas* 26 × 34 660 × 864 1.3077 Colombier 23.5 × 34.5 597 × 876 1.4681 Double demy 22.5 × 35.5 572 × 902 1.5(7) Imperial* 22 × 30 559 × 762 1.3636 Double large post 21 × 33 533 × 838 1.5713 Elephant* 23 × 28 584 × 711 1.2174 Princess 21.5 × 28 546 × 711 1.3023 Cartridge 21 × 26 533 × 660 1.2381 Royal* 20 × 25 508 × 635 1.25 Sheet, half post 19.5 × 23.5 495 × 597 1.2051 Double post 19 × 30.5 483 × 762 1.6052 Super royal 19 × 27 483 × 686 1.4203 Medium* 17.5 × 23 470 × 584 1.2425 Demy* 17.5 × 22.5 445 × 572 1.2857 Large post 16.5 × 21 419 × 533 1.(27) Copy draught 16 × 20 406 × 508 1.25 Large post 15.5 × 20 394 × 508 1.2903 Post* 15.5 × 19.25 394 × 489 1.2419 Crown* 15 × 20 381 × 508 1.(3) Pinched post 14.75 × 18.5 375 × 470 1.2533 Foolscap* 13.5 × 17 343 × 432 1.2593 Small foolscap 13.25 × 16.5 337 × 419 1.2453 Brief 13.5 × 16 343 × 406 1.1852 Pott 12.5 × 15 318 × 381 1.2 * The sizes marked with an asterisk are still in use in the United States.
Traditional sizes for writing paper in the United Kingdom. These sizes are no longer used since the UK switched to ISO sizes:[12]
Name in × in Quarto 11 × 9 Foolscap 13 × 8 Imperial 9 × 7 Kings 8 × 6.5 Dukes 7 × 5.5 The common divisions and their abbreviations include:
Name Abbr. Folds Leaves Pages Folio fo, f 1 2 4 Quarto 4to 2 4 8 Sexto, sixmo 6to, 6mo 3 6 12 Octavo 8vo 3 8 16 Duodecimo, twelvemo 12mo 4 12 24 Sextodecimo, sixteenmo 16mo 4 16 32 Foolscap folio is often referred to simply as "folio" or "foolscap". Similarly, "quarto" is more correctly "copy draught quarto".
Many of these sizes were only used for making books (see bookbinding), and would never have been offered for ordinary stationery purposes.[13]
Demitab
The demitab or demi-tab (from the French "demi" or half tabloid) is 5.5 × 8.5 in (140 × 216 mm), equal to one quarter of a sheet of 11 × 17 in (279 × 432 mm) tabloid size paper. In actual circulation, the size 8 × 10.5 in (203 × 267 mm) is common for a demitab.[14] Tabloid newspapers, which are "generally half the size of a broadsheet", also vary in size. To add to the lack of uniformity, broadsheets also vary in size.
Most industry standards express the direction of the grain last (e.g. 17×11 is short grain paper and 11×17 is long grain paper). See switching costs, network effects and standardization for possible reasons for differing regional adoption rates of the ISO standard sizes.
Transitional paper sizes
PA series
A transitional size called PA4 (210 × 280 mm/8.27 × 11.02 in) was proposed for inclusion into the ISO 216 standard in 1975. It has the height of Canadian P4 paper (215 mm × 280 mm, about 8½ in × 11 in) and the width of international A4 paper (210 × 297 mm/8.27 × 11.69 in). The table to the right, shows how this format can be generalized into an entire format series.
The PA formats did not end up in ISO 216, because the committee felt that the set of standardized paper formats should be kept to the minimum necessary. However, PA4 remains of practical use today. In landscape orientation, it has the same 4:3 aspect ratio as the displays of traditional TV sets, some computer displays and data projectors. PA4, with appropriate margins, is therefore a good choice as the format of presentation slides.
PA4 is also a useful compromise between A4 and US/Canadian Letter sizes. Hence it is used today by many international magazines, because it can be printed easily on equipment designed for either A4 or US Letter.
PA4-based series Name mm × mm Ratio PA0 840 × 1120 3:4 PA1 560 × 840 2:3 PA2 420 × 560 3:4 PA3 280 × 420 2:3 PA4 210 × 280 3:4 PA5 140 × 210 2:3 PA6 105 × 140 3:4 PA7 70 × 105 2:3 PA8 52 × 70 ≈3:4 PA9 35 × 52 ≈2:3 PA10 26 × 35 ≈3:4 Antiquarian
Although the movement is towards the international standard metric paper sizes, on the way there from the traditional ones there has been at least one new size just a little larger than that used internationally. British architects and industrial designers once used a size called "Antiquarian" as listed above, but given in the New Metric Handbook (Tutt & Adler 1981) as 813 × 1,372 mm (32 × 54 in) for board size. This is a little larger than the A0 size. So for a short time, a size called A0a (1,000 × 1,370 mm/39.4 × 53.9 in) was used in Britain.
Other metric sizes
Name mm × mm in × in Notes DL 99 × 210 3.7 × 8.3 common flyer 1/3 of an A4 DLE 110 × 220 4.3 × 8.7 common envelope size as it fits an A4 sheet folded to 1/3 height. F4 210 × 330 8.3 × 13.0 common in Southeast Asia and Australia. Sometimes called "foolscap" there. RA0 841 × 1189 33.0125 × 46.75 RA1 610 × 860 24.0 × 33.9 RA2 430 × 610 16.9 × 24.0 RA3 305 × 430 12.0 × 16.9 RA4 215 × 305 8.5 × 12.0 SRA0 900 × 1280 35.4 × 50.4 SRA1 640 × 900 25.2 × 35.4 SRA2 450 × 640 17.7 × 25.2 SRA3 320 × 450 12.6 × 17.7 SRA4 225 × 320 8.9 × 12.6 A3+ 329 × 483 13.0 × 19.0 Newspaper sizes
Main article: Newspaper formatNewspapers have a separate set of sizes.
- Berliner
- Broadsheet
- Compact
- Tabloid (newspaper format)
- Rhenish
In a recent trend[15][dead link] many newspapers have been undergoing what is known as "web cut down", in which the publication is redesigned to print using a narrower (and less expensive) roll of paper. In extreme examples, some broadsheet papers are nearly as narrow as traditional tabloids. An average roll of 26.4lb (43 gsm), 45 in (110 cm) diameter newsprint rolled out is 9.7 mi (15.6 km) long.
See also
- Paper density
- PC LOAD LETTER
- Photo print sizes
References
- ^ Lichtenberg’s letter to Johann Beckmann
- ^ a b American Forest and Paper Association. "Why is the standard paper size in the U.S. 8 ½" x 11"?". http://afandpa.org/paper.aspx?id=511. Retrieved 2009-08-04.
- ^ "Additional Facts and Other Interesting Details". http://www.dimensionsguide.com/junior-legal-paper-size/. Retrieved 2010-02-21.
- ^ Fyffe, Charles (1969). Basic Copyfitting. London: Studio Vista. p. 74. ISBN 0289797055.
- ^ a b c Adobe Systems Incorporated (February 9, 1996). "PostScript Printer Description File Format Specification". San Jose, California. p. 191. http://partners.adobe.com/public/developer/en/ps/5003.PPD_Spec_v4.3.pdf. Retrieved 2008-03-06
- ^ Rally de Leon. "Request for inclusion of Page Size 8.5"x13"". http://qa.openoffice.org/issues/show_bug.cgi?id=91260. Retrieved 2008-08-11.
- ^ Kuhn, Markus. "International standard paper sizes". http://www.cl.cam.ac.uk/~mgk25/iso-paper.html. Retrieved 2008-03-06.
- ^ "Armada mil". http://www.armada.mil.co/index.php?idcategoria=251610&download=Y. Retrieved 2010-12-12.
- ^ a b except for size Arch E1
- ^ "Filofax". http://www.filofaxusa.com/sizeguide/.
- ^ "Franklin Planner". http://www.franklinplanner.com.
- ^ "Traditional sizes for writing paper in the United Kingdom". atsyn.com. http://www.atsyn.com/PaperSizes/FormatDetail/29. Retrieved 2011-06-30.
- ^ "Book sizes, with reference tables". http://www.trussel.com/books/booksize.htm
- ^ Max Image Area. Horizon Publications. http://horizonpublications.ca/html/max_image_area.php
- ^ "Press web". Naa.org. http://www.naa.org/technology/pressweb/index.html. Retrieved 2010-12-12.
Further reading
- International standard ISO 216, Writing paper and certain classes of printed matter—Trimmed sizes—A and B series. International Organization for Standardization, Geneva, 1975.
- International standard ISO 217: Paper—Untrimmed sizes—Designation and tolerances for primary and supplementary ranges, and indication of machine direction. International Organization for Standardization, Geneva, 1995.
- Max Helbig, Winfried Hennig: DIN-Format A4—Ein Erfolgssystem in Gefahr. Beuth-Kommentare, Beuth Verlag, Berlin, 1998. ISBN 3-410-11878-0
- Arthur D. Dunn: Notes on the standardization of paper sizes. Ottawa, Canada, 54 pages, 1972.
External links
Categories:- Paper
- Standards
- Stationery
- Technical drawing
Wikimedia Foundation. 2010.