Double tangent bundle

Double tangent bundle

In mathematics, particularly differential topology, the double tangent bundle or the second tangent bundle refers to the tangent bundle (TTM,πTTM,TM) of the total space TM of the tangent bundle (TM,πTM,M) of a smooth manifold M [1]. The second tangent bundle arises in the study of connections and second order ordinary differential equations, i.e., (semi)spray structures on smooth manifolds, and it is not to be confused with the second order jet bundle.

Contents

Secondary vector bundle structure and canonical flip

Since (TM,πTM,M) is a vector bundle on its own right, its tangent bundle has the secondary vector bundle structure (TTM,(πTM)*,TM), where (πTM)*:TTMTM is the push-forward of the canonical projection πTM:TMM. In the following we denote


\xi = \xi^k\frac{\partial}{\partial x^k}\Big|_x\in T_xM, \qquad X = X^k\frac{\partial}{\partial x^k}\Big|_x\in T_xM

and apply the associated coordinate system


\xi \mapsto (x^1,\ldots,x^n,\xi^1,\ldots,\xi^n)

on TM. Then the fibre of the secondary vector bundle structure at XTxM takes the form


(\pi_{TM})^{-1}_*(X) = \Big\{ \ X^k\frac{\partial}{\partial x^k}\Big|_\xi + Y^k\frac{\partial}{\partial\xi^k}\Big|_\xi
\ \Big| \ \xi\in T_xM \ , \ Y^1,\ldots,Y^n\in\R \ \Big\}.

The canonical flip[2] is a smooth involution j:TTMTTM that exchanges these vector space structures in the sense that it is a vector bundle isomorphism between (TTM,πTTM,TM) and (TTM,(πTM)*,TM). In the associated coordinates on TM it reads as


j\Big(X^k\frac{\partial}{\partial x^k}\Big|_\xi + Y^k\frac{\partial}{\partial \xi^k}\Big|_\xi\Big)
= \xi^k\frac{\partial}{\partial x^k}\Big|_X + Y^k\frac{\partial}{\partial \xi^k}\Big|_X.

Canonical tensor fields on the tangent bundle

As for any vector bundle, the tangent spaces Tξ(TxM) of the fibres TxM of the tangent bundle (TM,πTM,M) can be identified with the fibres TxM themselves. Formally this is achieved though the vertical lift, which is a natural vector space isomorphism vlξ:TxMTξ(TxM) defined as


(\operatorname{vl}_\xi X)[f]:=\frac{d}{dt}\Big|_{t=0}f(x,\xi+tX), \qquad f\in C^\infty(TM).

The vertical lift can also be seen as a natural vector bundle isomorphism vl:(πTM)*TMVTM from the pullback bundle of (TM,πTM,M) over πTM:TMM onto the vertical tangent bundle


VTM:=\operatorname{Ker}(\pi_{TM})_* \subset TTM.

The vertical lift lets us define the canonical vector field


V:TM\to TTM; \qquad V_\xi := \operatorname{vl}_\xi\xi,

which is smooth in the slit tangent bundle TM\0. The canonical vector field can be also defined as the infinitesimal generator of the Lie-group action


\mathbb R\times (TM\setminus 0) \to TM\setminus 0; \qquad (t,\xi) \mapsto e^t\xi.

Unlike the canonical vector field, which can be defined for any vector bundle, the canonical endomorphism


J:TTM\to TTM; \qquad J_\xi X := \operatorname{vl}_\xi(\pi_{TM})_*X, \qquad X\in T_\xi TM

is special to the tangent bundle. The canonical endomorphism J satisfies


\operatorname{Ran}(J)=\operatorname{Ker}(J)=VTM, \qquad \mathcal L_VJ= -J, \qquad J[X,Y]=J[JX,Y]+J[X,JY],

and it is also known as the tangent structure for the following reason. If (E,p,M) is any vector bundle with the canonical vector field V and a (1,1)-tensor field J that satifies the properties listed above, with VE in place of VTM, then the vector bundle (E,p,M) is isomorphic to the tangent bundle (TM,πTM,M) of the base manifold, and J corresponds to the tangent structure of TM in this isomorphism.

There is also a stronger result of this kind [3] which states that if N is a 2n-dimensional manifold and if there exists a (1,1)-tensor field J on N that satisfies


\operatorname{Ran}(J)=\operatorname{Ker}(J), \qquad J[X,Y]=J[JX,Y]+J[X,JY],

then N is diffeomorphic to an open set of the total space of a tangent bundle of some n-dimensional manifold M, and J corresponds to the tangent structure of TM in this diffeomorphism.

In any associated coordinate system on TM the canonical vector field and the canonical endomorphism have the coordinate representations


V = \xi^k\frac{\partial}{\partial \xi^k}, \qquad J = dx^k\otimes\frac{\partial}{\partial \xi^k}.

(Semi)spray structures

A Semispray structure on a smooth manifold M is by definition a smooth vector field H on TM \0 such that JH=V. An equivalent definition is that j(H)=H, where j:TTMTTM is the canonical flip. A semispray H is a spray, if in addition, [V,H]=H.

Spray and semispray structures are invariant versions of second order ordinary differential equations on M. The difference between spray and semispray structures is that the solution curves of sprays are invariant in positive reparametrizations as point sets on M, whereas solution curves of semisprays typically are not.

Nonlinear covariant derivatives on smooth manifolds

The canonical flip makes it possible to define nonlinear covariant derivatives on smooth manifolds as follows. Let


T(TM\setminus 0) = H(TM\setminus 0) \oplus V(TM\setminus 0)

be an Ehresmann connection on the slit tangent bundle TM/0 and consider the mapping


D:(TM\setminus 0)\times \Gamma(TM) \to TM; \quad D_XY :=  (\kappa\circ j)(Y_*X),

where Y*:TMTTM is the push-forward, j:TTMTTM is the canonical flip and κ:T(TM/0)→TM/0 is the connector map. The mapping DX is a derivation in the module Γ (TM) of smooth vector fields on M in the sense that

  • D_X(\alpha Y + \beta Z) = \alpha D_XY + \beta D_XZ, \qquad \alpha,\beta\in\mathbb R.
  • D_X(fY) = X[f]Y + f D_XY, \qquad \qquad \qquad f\in C^\infty(M).

Any mapping DX with these properties is called a (nonlinear) covariant derivative [4] on M. The term nonlinear refers to the fact that this kind of covariant derivative DX on is not necessarily linear with respect to the direction XTM/0 of the differentiation.

Looking at the local representations one can confirm that the Ehresmann connections on (TM/0,πTM/0,M) and nonlinear covariant derivatives on M are in one-to-one correspondence. Furthermore, if DX is linear in X, then the Ehresmann connection is linear in the secondary vector bundle structure, and DX coincides with its linear covariant derivative if and only if the torsion of the connection vanishes.

See also

References

  1. ^ J.M.Lee, Introduction to Smooth Manifolds, Springer-Verlag, 2003.
  2. ^ P.Michor. Topics in Differential Geometry, American Mathematical Society, 2008.
  3. ^ D.S.Goel, Almost Tangent Structures, Kodai Math.Sem.Rep. 26 (1975), 187-193.
  4. ^ I.Bucataru, R.Miron, Finsler-Lagrange Geometry, Editura Academiei Române, 2007.

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Line bundle — In mathematics, a line bundle expresses the concept of a line that varies from point to point of a space. For example a curve in the plane having a tangent line at each point determines a varying line: the tangent bundle is a way of organising… …   Wikipedia

  • List of mathematics articles (D) — NOTOC D D distribution D module D D Agostino s K squared test D Alembert Euler condition D Alembert operator D Alembert s formula D Alembert s paradox D Alembert s principle Dagger category Dagger compact category Dagger symmetric monoidal… …   Wikipedia

  • Spin structure — In differential geometry, a spin structure on an orientable Riemannian manifold allows one to define associated spinor bundles, giving rise to the notion of a spinor in differential geometry. Spin structures have wide applications to mathematical …   Wikipedia

  • Orientability — For orientation of vector spaces, see orientation (mathematics). For other uses, see Orientation (disambiguation). The torus is an orientable surface …   Wikipedia

  • Metric tensor — In the mathematical field of differential geometry, a metric tensor is a type of function defined on a manifold (such as a surface in space) which takes as input a pair of tangent vectors v and w and produces a real number (scalar) g(v,w) in a… …   Wikipedia

  • Vector space — This article is about linear (vector) spaces. For the structure in incidence geometry, see Linear space (geometry). Vector addition and scalar multiplication: a vector v (blue) is added to another vector w (red, upper illustration). Below, w is… …   Wikipedia

  • Differential geometry of surfaces — Carl Friedrich Gauss in 1828 In mathematics, the differential geometry of surfaces deals with smooth surfaces with various additional structures, most often, a Riemannian metric. Surfaces have been extensively studied from various perspectives:… …   Wikipedia

  • Tensor field — In mathematics, physics and engineering, a tensor field is a very general concept of variable geometric quantity. It is used in differential geometry and the theory of manifolds, in algebraic geometry, in general relativity, in the analysis of… …   Wikipedia

  • Covariant derivative — In mathematics, the covariant derivative is a way of specifying a derivative along tangent vectors of a manifold. Alternatively, the covariant derivative is a way of introducing and working with a connection on a manifold by means of a… …   Wikipedia

  • Lie group — Lie groups …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”