- Concentration ratio
-
In economics, a concentration ratio is a measure of the total output produced in an industry by a given number of firms in the industry. The most common concentration ratios are the CR4 and the CR8, which means the four and the eight largest firms. Concentration ratios are usually used to show the extent of market control of the largest firms in the industry and to illustrate the degree to which an industry is oligopolistic.[1]
The standard tools of competition economists and competition authorities to measure market concentration are the Herfindahl index (HHI) and the concentration ratios (CR(n)).[2] These two are known as the traditional structural measures of market concentration (based on market shares). The concentration of firms in an industry is of interest to economists, business strategists and government agencies.[3]
Contents
Two common ratios
- The Four-Firm Concentration Ratio measures the total market share of the four largest firms in an industry.
- The Eight-Firm Concentration Ratio measures the total market share of the eight largest firms in an industry.
Usually, these two common ratios are comparable from industry to industry, while concentration ratios for other numbers of firms can be also calculated.[1]
Calculation
The concentration ratio is the percentage of market share held by the largest firms (m) in an industry.
CRm= Σmi=1 si
Therefore it can be expressed as:
CRm = s1 + s2 + .... + sm where si is the market share and m defines the ith firm[4]Concentration levels
Concentration ratios range from 0 to 100 percent. The levels reach from no, total, low or medium to high concentration.
[1]- No concentration
- 0% means perfect competition or at the very least monopolistic competition. If for example CR4=0 %, the four largest firm in the industry would not have any significant market share.
- Total concentration
- 100% means an extremely concentrated oligopoly. If for example CR1= 100%, there is a monopoly.
- Low concentration
- 0% to 50%. This category ranges from perfect competition to oligopoly.
- Medium concentration
- 50% to 80%. An industry in this range is likely an oligopoly.
- High concentration
- 80% to 100%. This category ranges from oligopoly to monopoly.
Problems
The definition of the concentration ratio does not use the market shares of all the firms in the industry and does not provide the distribution of firm size. It also does not provide a lot of detail about competitiveness of the industry. The concentration ratios just provide a sign of the oligopolistic nature of an industry and indicate the degree of competition.[3][1] The Herfindahl index provides a more complete picture of industry concentration than does the concentration ratio.
Concentration ratios in United Kingdom
UK industries with the highest five-firm concentration ratios include the following:[5]
- Sugar: 99%
- Tobacco products: 99%
- Gas distribution: 82%
- Oils and fats: 88%
- Confectionery: 81%
- Man-made fibres: 79%
- Coal extraction: 79%
- Soft drinks and mineral waters: 75%
- Pesticides: 75%
- Weapons and ammunition: 77%
UK industries with the lowest five-firm concentration ratios include the following:[5]
- Metal forging, pressing etc.: 4%
- Plastic products: 4%
- Furniture: 5%
- Construction: 5%
- Structural metal products: 6%
- Wholesale distribution: 6%
- General purpose machinery: 8%
- Wood and wood products: 9%
Electricity specific measures
As to account for the specificities of electricity markets the specific structural measures are calculated. The Herfindahl index and the concentration ratios focus on the market shares of companies, but these measures identify the “pivotalness” of companies to meeting the demand on the system. A company that is very pivotal can be said to have a high market power.[2]
Pivotal Supplier Index (PSI)
The Pivotal Supplier Index considers in addition to the supply side the demand. At the most basic level, the PSI answers the question if a particular supplier, the "pivotal supplier", is needed to supply the demand: would it be possible to supply the electricity demand also without this supplier or is he mandatory?[4]
The Pivotal Supplier Index is expressed as the following:
PSI = I[Cx > Σni=I Ci - Total Consumption]
where Cx is the capacity of the potential pivotal supplier and the sum of Ci the capacity of all suppliers. The function I[.] is the indicator function, which takes the value 1 if the expression "." contained in it is true.An equivalent expression is the following:
PSI = I[Total consumption > Σi≠xCi ]
where the sum of capacities is taken over all suppliers apart from x.The PSI is a binary indicator that can be calculated hourly. If the supplier Cx is needed to supply the demand, it is pivotal and the index takes the value "1". If he is not pivotal, it takes the value "0".[4]
Residual Supply Index (RSI)
The Residual Supply Index is a simple and effective tool in monitoring market power. It is the non-binary alternative to the PSI.[4]
The Residual Supply Index is expressed as:RSI = (Σn1 Ci - Cx)/Last
where Cx is the capacity of the analysed supplier and the sum of Ci the capacity of all suppliers.Receiving a result bigger than 100% is an indication that the supplier x should have little influence on the price. With a RSI smaller than 100%. the supplier x could easily practise market power. The RSI has the advantage over the PSI to be not binary and for this reason he can better indicate the increase of the structural market power.[4]
Notes
- ^ a b c d Concentration Ratios, 16.12.2009
- ^ a b London economics in association with global energy decisions: Structure and Performance of Six European Wholesale Electricity Markets in 2003, 2004 and 2005, presented to DG Comp 26th February 2007, page 52 and page 8
- ^ a b Industry Concentration, 20.10.2009
- ^ a b c d e Lang, C:Marktmacht und Marktmachtmessung im deutschen Großhandelsmarkt für Strom, Deutscher Universitätsverlag/GWF Fachverlag Gmbh, Wiesbaden 2007, S.8, S.9 - 11
- ^ a b National Statistics Economic Trends: Concentration Ratios 2004, pages 26 and 42-44.
References
German
- Christoph Lang: Marktmacht und Marktmachtmessung im deutschen Großhandelsmarkt für Strom, Deutscher Universitätsverlag/GWF Fachverlag Gmbh, Wiesbaden 2007
English
- London economics in association with global energy decisions: Structure and Performance of Six European Wholesale Electricity Markets in 2003, 2004 and 2005, presented to DG Comp 26th February 2007
- Industry Concentration
- Concentration Ratios
- National Statistics Economic Trends: Concentration Ratios 2004
See also
- Market form
- Herfindahl index
- Microeconomics
- Market dominance strategies
Categories:- Monopoly (economics)
- Imperfect competition
Wikimedia Foundation. 2010.