MIL-STD-498

MIL-STD-498

MIL-STD-498 (Military-Standard-498) was a United States military standard whose purpose was to "establish uniform requirements for software development and documentation." It was released Nov. 8, 1994, and replaced DOD-STD-2167A, DOD-STD-7935A, and DOD-STD-1703. It was meant as an interim standard, to be in effect for about two years until a commercial standard was developed.

Unlike previous efforts like the seminal "2167A" which was mainly focused on the risky new area of software development, "498" was the first attempt at a truly comprehensive description of the system level life-cycle. It was the baseline that all of the ISO, IEEE, and related efforts after it replaced. It also contains much of the material that the subsequent professionalization of Project Management covered in the PMBOK. The document "MIL-STD-498 Overview and Tailoring Guidebook" is 98 pages. The "MIL-STD-498 Application and Reference Guidebook" is 516 pages. And then there were the document templates or DIDs described below, bringing documentation and process order that could scale to projects of the size humans were then conducting (aircraft, battleships, canals, dams, factories, satellites, submarines, etc.).

It was one of the few military standards that survived the infamous "Perry Memo", then U.S. Secretary of Defense William Perry's written command that, effectively, the U.S. military did not require special standards any more, from hammers to systems. However, it was cancelled on May 27, 1998 and replaced by J-STD-016 and IEEE 12207. Several programs outside of the U.S. military continued to use the standard, due to familiarity and perceived advantages over alternative standards, such as free availability of the standards documents.

Data Item Descriptions

A key component of the standard is 22 Data Item Descriptions (DIDs). Each DID generically describes the required content of a data item, a "document" that describes the software or some aspect of the software life-cycle. These documents could take many forms, from source code, to installation scripts, to various electronic and paper reports, and the contracting party (e.g., the government) is encouraged to specify acceptable formats. The set of data item descriptions, once tailored for a specific contract, then become Contract Data Requirement List items ("CDRLs") that represent the deliverable items of a contract. Depending on the nature of the project, not all data items may be required.

The DIDs are:
* Software Development Plan (SDP) - A plan for performing the software development
* Software Test Plan (STP) - A plan for conducting qualification testing
* Software Installation Plan (SIP) - A plan for installing the software at user sites
* Software Transition Plan (STrP) - A plan for transitioning to the support agency
* Operational Concept Description (OCD) - The operational concept for the system
* System/Subsystem Specification (SSS) - The requirements to be met by the system
* Software Requirements Specification (SRS) - The requirements to be met by a Computer Software Configuration Item (CSCI)
* Interface Requirements Specification (IRS) - The requirements for one or more interfaces
* System/Subsystem Design Description (SSDD) - The design of the system
* Software Design Description (SDD) - The design of a CSCI
* Interface Design Description (IDD) - The design of one or more interfaces
* Database Design Description (DBDD) - The design of a database
* Software Test Description (STD) - Test cases/procedures for qualification testing
* Software Test Report (STR) - Test results of qualification testing
* Software Product Specification (SPS) - The executable software, the source files, and information to be used for support
* Software Version Description (SVD) - A list of delivered file and related information
* Software User Manual (SUM) - Instructions for hands-on users of the software
* Software Input/Output Manual (SIOM) - Instructions for users of a batch or interactive software system that is installed in a computer center
* Software Center Operator Manual (SCOM) - Instructions for operators of a batch or interactive software system that is installed in a computer center
* Computer Operation Manual (COM) - Instructions for operating a computer
* Computer Programming Manual (CPM) - Instructions for programming a computer
* Firmware Support Manual (FSM) - Instructions for programming firmware devices

External links

* [http://www.abelia.com/498pdf/roadmap.pdf MIL-STD-498 full hyperlinked PDF]
* [http://www.pogner.demon.co.uk/mil_498/ The MIL-STD-498 standard]
* [http://www.stsc.hill.af.mil/crosstalk/1995/02/MILSTD.asp Military's summary of MIL-STD-498]
* [http://www.everyspec.com/MIL-STD/MIL-STD+(0300+-+0499)/download.php?spec=MIL-STD-498.006933.pdf MIL-STD-498 Complete PDF - Dec 1994]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • MIL-STD-2167 — The terms MIL STD 2167(A) and MIL STD 2168 are the official codes for the former U.S. DoD military standards describing documents and procedures required for developing military computer systems, under the guidance of military personnel. (Those… …   Wikipedia

  • DOD-STD-2167A — (Department of Defense Standard 2167A), titled Defense Systems Software Development , was a United States defense standard, published on February 29, 1988, which updated the less well known DOD STD 2167 published 4 June 1985. This document… …   Wikipedia

  • SSDD — * Single Sided Double Density (Computing » General) * System/ Segment Design Document (Computing » Software) * System/ Segment Design Document (Governmental » NASA) * System/ Segment Design Document (Governmental » Transportation) * System/… …   Abbreviations dictionary

  • United States Military Standard — A United States defense standard, often called a military standard, MIL STD , MIL SPEC , or (informally) MilSpecs , is used to help achieve standardization objectives by the U.S. Department of Defense. Standardization is beneficial in achieving… …   Wikipedia

  • Defense Standard — A United States Defense Standard, often called a military standard, MIL STD , or MIL SPEC , is used to help achieve standardization objectives by the U.S. Department of Defense. Standardization is beneficial in achieving interoperability,… …   Wikipedia

  • V-Modell (Entwicklungsstandard) — Das V Modell ist ein Entwicklungsstandard für die Planung und Durchführung von IT Systementwicklungsprojekten der öffentlichen Hand in der Bundesrepublik Deutschland. Es umfasst das Vorgehensmodell, die Methodenzuordnung und die funktionalen… …   Deutsch Wikipedia

  • Frederick I. Moxley — Infobox Scientist box width = 300px name = Frederick I. Moxley image size = caption = birth date = birth place = death date = death place = residence = United States citizenship = American fields = Network Science Computer Science Microbial… …   Wikipedia

  • Aba CM Enablement — is an engineering data management, configuration management and change control tool that allows users connected only by a TCP/IP network to share and control data. Most CM tools only control a small part of a project s configuration; Aba makes it …   Wikipedia

  • Waterfall model — The waterfall model is a sequential design process, often used in software development processes, in which progress is seen as flowing steadily downwards (like a waterfall) through the phases of Conception, Initiation, Analysis, Design,… …   Wikipedia

  • IDD — is a three letter acronym that can refer to:*Insulin dependent diabetes *International Direct Dialling (see the List of country calling codes) *Iodine deficiency disorders. The acronym is commonly used when discussing IDD eradication programs. *… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”