Spinodal decomposition

Spinodal decomposition is a method by which a mixture of two or more materials can separate into distinct regions with different material concentrations. This method differs from nucleation in that phase separation due to spinodal decomposition occurs throughout the material, and not just at nucleation sites.

pinodal region of the phase diagram

Phase separation occurs whenever a material transitions into the unstable region of the phase diagram. The boundary of the unstable region, sometimes referred to as the "binodal", is found by performing a common tangent construction of the free-energy diagram. Inside the binodal is a region called the spinodal, which is found by determining where the curvature of the free-energy curve is negative. The binodal and spinodal meet at the critical point. It is when a material is moved into the spinodal region of the phase diagram that spinodal decomposition can occur.Cite book | last = Jones | first = Richard A. L. | title = Soft Condensed Matter | origyesr = 2002 | url = http://books.google.com/books?id=Hl_HBPUvoNsC | accessdate = 2007-10-22 | publisher = Oxford University Press | isbn = 0198505892 | pages = 33]

To reach the spinodal region of the phase diagram, a transition must take the material through the binodal region or the critical point. Often phase separation will occur via nucleation during this transition, and spinodal decomposition will not be observed. To observe spinodal decomposition, a very fast transition, often called a "quench", is required to move from the stable to the spinodally unstable region of the phase diagram.

In some systems, ordering of the material leads to a compositional instability and this is known as a "conditional spinodal", e.g. in the feldspars [Cite journal | last = Carpenter | first = M. A. | date = 1981 | title = A "conditional spinodal" within the peristerite miscibility gap of plagioclase feldspars | journal = Journal of the American Mineralogist | volume = 66 | pages = 553–560 | url = http://www.minsocam.org/ammin/AM66/AM66_553.pdf]

The dynamics of spinodal decomposition

In the spinodal region of the phase diagram, the free-energy can be lowered by allowing the components to separate, thus increasing the relative concentration of a component material in a particular region of the material. The concentration will continue to increase until the material reaches the stable part of the phase diagram. Very large regions of material will change their concentration slowly due to the amount of material which must be moved. Very small regions will shrink away due to the energy cost in maintaining an interface between two dissimilar component materials.

To initiate a homogeneous quench a control parameter, such as temperature, is abruptly and globally changed. For a binary mixture of $A$-type and $B$-type materials, the Landau free-energy

:$F=int!!dx,\; left(frac\{A\}\{2\}phi^2+frac\{B\}\{4\}phi^4\; +\; frac\{kappa\}\{2\}left(\; ablaphi\; ight)^2\; ight);.$

is a good approximation of the free-energy near the critical point and is often used to study homogeneous quenches. The mixture concentration $phi=\; ho\_A-\; ho\_B$ is the density difference of the mixture components, the control parameters which determine the stability of the mixture are $A$ and $B$, and the interfacial energy cost is determined by $kappa$.

Diffusive motion often dominates at the length-scale of spinodal decomposition. The equation of motion for a diffusive system is

:$partial\_tphi=\; abla\; (\; m\; ablamu\; +\; xi(x)\; );,$

where $m$ is the diffusive mobility, $xi(x)$ is some random noise such that $langlexi(x)\; angle=0$, and the chemical potential $mu$ is derived from the Landau free-energy:

:$mu=frac\{delta\; F\}\{delta\; phi\}=Aphi+Bphi^3-kappa\; abla^2\; phi;.$

We see that if , small fluctuations around $phi=0$ have a negative effective diffusive mobility and will grow rather than shrink. To understand the growth dynamics, we disregard the fluctuating currents due to $xi$, linearize the equation of motion around $phi=phi\_\{in\}$ and perform a Fourier transform into $k$-space. This leads to

:$partial\_t\; ilde\{phi\}(k,t)=-m((A\; +\; 3Bphi\_\{in\}^2)k^2\; +\; kappa\; k^4)\; ilde\{phi\}(k,t)=R(k)\; ilde\{phi\}(k,t);,$

which has an exponential growth solution:

:$ilde\{phi\}(k,t)\; =\; exp(R(k)t);.$

Since the growth rate $R(k)$ is exponential, the fastest growing angular wavenumber

:$k\_\{sp\}\; =\; sqrt\{frac\{-(A+3Bphi\_\{in\}^2)\}\{2kappa;,$

will quickly dominate the morphology. We now see that spinodal decomposition results in domains of the characteristic length scale called the "spinodal length":

:$lambda\_\{sp\}\; =\; frac\{2pi\}\{k\_\{sp\; =\; 2pisqrt\{frac\{2kappa\}\{-(A+3Bphi\_\{in\}^2);.$

The growth rate of the fastest growing angular wave number is

:$R(k\_\{sp\})=-m((A\; +\; 3Bphi\_\{in\}^2)k\_\{sp\}^2\; +\; kappa\; k\_\{sp\}^4)=frac\{m(A+3Bphi\_\{in\}^2)^2\}\{4kappa\}\; =\; frac\{1\}\{t\_\{sp$

where $t\_\{sp\}$ is known as the "spinodal time".

The spinodal length and spinodal time can be used to nondimensionalize the equation of motion, resulting in universal scaling for spinodal decomposition.

ee also

* Fluid mechanics
* Computational fluid dynamics

References

External links

* [http://math.gmu.edu/~sander/movies/spinum.html A pictorial view of the formation of binary alloys]

Further reading

*
* http://www.brushwellman.com/alloy/tech_lit/AT0025.pdf
* http://math.gmu.edu/~sander/movies/spinum.html
* http://pruffle.mit.edu/3.00/Lecture_32_web/node3.html
* http://www.physics.ndsu.nodak.edu/wagner/spinodal/spinodal.html