Wiring party

Wiring parties, (or wiring sappers, cutters), were used during World War I on the Western Front as an offensive countermeasure against the enemy’s barbed wire obstacles. Though a hazardous and stressful duty, workers worked at night to repair, improve, and rebuild their own wire defences, while also sabotaging and cutting the enemy’s. In battles all across the Western Front, cutting parties were successful in creating breaches in the wire lines, offering their comrades a better chance to make it across No man's land.

"Barbed wire was one of the attacker’s great problems. There were cutters, but not enough, and men were often killed before they could cut a way." [Ferro, Marc. "Great War, 1914-1918", 87.]

New Technology

The outbreak of World War One sparked a revolution in modern warfare, and the use of barbed wire on the battlefield was one of the many technologies relied on to hamper the enemy’s attack. Originally used by American cattle ranchers since the 1870’s, barbed wire was adapted on the Western Front to serve a more gruesome purpose then containing livestock. [Keegan, John. "World War", 175.] Transformed into a weapon of war, it was shaped to create deadly obstacles in the path of assaulting enemy troops. Meant to trap, maim, and make easy targets of the opponent, they ranged from a single strand of wire arranged to trip men in the dark, to a 150m long construction 30 ft wide and 5 or 6 ft tallKnight, W. Stanley MacBean. "The History of the Great European War: Its Causes and Effects", 184.] By spring of 1915, barbed wire entanglements were an unavoidable element in trench warfare, and posed a serious threat to all men going “over the top.” [Keegan, John. "World War", 176.]

The Call of Duty

The integration of barbed wire as an instrument of war required the formation of tactical teams, or wiring parties. Barbed wire defences needed to be maintained often, as shrapnel from the day’s battle often cut the wire, or the enemy had sabotaged it during the battle or the night before. Still, the workers did not just deal with the actual wire; they also had to clear the entanglements of any bodies or body parts.Under the cover of darkness, often 1/3rd of most units stealthily climbed out of the trenches to perform maintenance on their wires, as well as investigation of the status of the enemy's. Keene, Jennifer D. "World War One", 140.] They were charged with the task of repairing damaged wire and reconstructing the line if necessary. In addition, these working parties attempted to cut and destroy the enemy’s wire in the hopes of preventing their troops from being stopped in the middle of No-Man’s Land during the next attack. From as early as 9pm and as late as 3am, they were like “so many animals, working during the night and sleeping by day.” [Letter, “ [http://www.canadianletters.ca/letters.php?letterid=2658&warid=3&docid=1&collectionid=181 Alexander Matier] ,” The Canadian Letters and Images project. Accessed 25 September 2007] As the war progressed, it seemed to become “regular routine,” but often one of the most deadly and difficult duties to perform. [Memoir, “ [http://www.canadianletters.ca/letters.php?letterid=4502&warid=3&docid=5collectionid=274 Kenneth Walter Foster] ,” The Canadian Letters and Images project. Accessed 25 September 2007]

Equipment and Methods

Due to the extreme dangers inherent with No-Man’s Land, specialized tools and methods were implemented to make the process quieter and more efficient. Pickets, or metal posts, were originally used to hold up the wire and were hammered in by a muffled mallet. However, this still produced noise, rendering the sappers targets for the enemies. Therefore, screw-pickets or “cork-screws” were produced.These looped steel posts had a drill-like end, allowing it to be twisted into the ground noiselessly and the wire then wrapped around it. [Digger History, “ [http://www.diggerhistory.info/pages-slang/ww1.htm Slang Used in The Trenches] ,” World War One. Accessed 25 September 2007]

The wiring parties began by creeping into No-Man’s Land carrying all their equipment, including the 6ft tall screw-pickets and rolls of sharp barbed wire. Often this was a painful task in itself:

"“You mention in your letter about what I would like or need most…However, I’m not complaining or asking for anything so don’t worry about me. A good stout pair of gloves for handling barbed wire or fur gloves (lined) would be acceptable.”" (Lt. Cecil Louis' letter to his wife, 1916) [Letters, “ [http://www.canadianletters.ca/letters.php?letterid=6716&warid=3&docid=1&collectionid=293 Cecil and Louis Duff] ,” The Canadian Letters and Images project. Accessed 25 September 2007]

Erecting wire was time consuming and meticulous; sappers had to first repair wire by hand, then construct new defences if needed. Destroying wire, on the other hand, could done either by going through, over, or under the wire, and could be done by hand or by using wire-cutting shells and mortars. [Tucker, Dr. Spencer C. "Wire Sapping". "The Encyclopedia of World War I", Volume 4, 1266.] The object of the wiring parties was to slow down the enemy’s attack, while speeding up their own. For this reason, workers attempted to make it impossible for the enemy to get to their trench, while sabotaging the enemy’s wire for their own benefit. In addition, though the distance between trenches varied between 7 and 500 yards, workers tried to erect barbed wire defences as far away from their trench as possible, to prevent the enemy from getting too close to the trench, or possibly lobbing in grenades. [“ [http://www.firstworldwar.com/atoz/wiring.htm Wiring Parties] ,” The First World War. Accessed 25 September 2007]

Dangers

"“Working with barbed wire was a nasty job under any circumstances, but when you were handling it in the dark and within a hundred yards of rifles and machine guns that would shoot at the least sound, you were doing one of the most nerve-wracking bits of work that could possibly be imagined...the slightest move might mean death for half your party.”" Memoirs, “ [http://www.canadianletters.ca/letters.php?letterid=8000&warid=3&docid=5&collectionid=315 Charles Henry Savage] ,” The Canadian Letters and Images project. Accessed 25 September 2007]

Wiring parties faced the constant danger of being seen and noticed by enemy searchlights or troops. Enemy sentries were trained to listen and look for these night time raiders, and any suspicious sounds or movements could give away the men’s position and consequently bring a concentration of heavy fire that way. Unprotected and often standing, wiring parties were subject to enemy flares which would expose them immediately, causing them to have to fall down and lie flat, even on the very wire they were carrying.

To conceal themselves as much as possible, party members left extra supplies in the trench, and only ventured out at night. The teams scrambled to work as quickly and silently as possible, as such stressful night work and physical labour promoted fatigue and little time to sleep. Also, returning back to one’s trench in the middle of the night proved tricky, as workers often got lost on their way back. Finally, wiring parties were always wary of the enemy’s parties, as they performed the same task each night.

Notes

References

* Ferro, Marc. "Great War, 1914-1918". (London : Routledge & K. Paul, 1973).
* Keegan, John. "World War". 11th ed., (London: Alfred A.Knopfe Inc).
* Keene, Jennifer D. "World War One". 1st ed., (Greenwood Press, 2006).
* Knight, W. Stanley MacBean. "The History of the Great European War: It’s Causes and Effects". Eminent Naval and Military Experts. Volume 3. (London: Caxton Publishing Company, Limited).
* Tucker, Dr. Spencer C. "Wire Sapping". "The Encycolpedia of World War I". Roberts, Priscilla. Vol. 4. (California: ABC-CLIO, 2005)