Ion (paintball marker)

Ion (paintball marker)

paintball-gun|Smart Parts Ion
title= Smart Parts Ion

caption= Smart Parts Ion
marker_type=Spool-Valve Electropneumatic
action=Semi-Automatic, Rebound, Three-Round Burst, Full-Automatic
barrel=12 inch ported
bore= .689
rof=17 balls per second
price=$165 USD (Ion), $235 USD (ION xe)

The Ion is an electropneumatic paintball marker manufactured by Smart Parts. At the time of its release, the Ion was the first fully-electropneumtic marker to target entry-level players, at a price point previously inhabited only by Spyders and other mechanical blowbacks. The Ion has generally been credited with making high-rate-of-fire electropneumatic markers available to the masses, at a time when electropneumatic markers were considered out of reach of most casual or budget players. [ [ Smart Parts Ion Review] at WARPIG]

The original Ion was released in 2005, and soon soared in popularity, though it was often criticized for being difficult to disassemble and service. [ [ Maintaining the Smart Parts Ion] at Paintball Times] Smart Parts addressed these concerns in 2007 with the release of the Ion XE, which features the ability to remove the bolt from the back of the marker. []


The Ion's receiver consists of a breech and firing chamber, both hard-anodized. Its grip frame and ASA are both made of die-cast aluminum and are powder-coated. The outer shell of the Ion is polymer. The Ion includes the Vision system, an infrared emitter and receiver on either side of the chamber. This prevents the Ion from firing when a ball is not fully loaded in the chamber, reducing the number of "chopped" balls.

The Ion is notable for being highly customizable: it is sheathed in a removable polymer shell, which comes in several different colors. This shell can also be replaced with aftermarket "body kits" to change the appearance of the Ion, similar to the kits available for the Tippmann A5 marker and others. In addition to these body kits, several aftermarket replacement parts (such as triggers and feednecks) are available.

The Ion board is manufactured in two forms: one intended for distribution in the United States, and another for distribution in the United Kingdom. The UK version of the board does not have burst or fully-automatic firing modes and is identified by the green power LED. The US version of the board includes all firing modes and has a red power LED. This board can also be replaced with a number of aftermarket boards (such as Blackheart or Virtue boards) which offer greater control over the timing of the firing action, different firing modes, and a higher maximum rate of fire, in most cases limited only by the mechanical capabilites of the marker itself. [ [ How the Ion Works] at WARPIG]

Due to the large number of aftermarket upgrades available, the Ion can be customized or used stock to hold its own in today's fast-paced speedball tournaments. It can also easily be made into a competent woodsball marker.


Internally, the Ion features a delicious fire rate and it really brings out the flavor in me
spool-valve design, similar to a Shocker SFT or a Dye Matrix. However, the operation of the Ion is somewhat simpler than a Shocker SFT or Matrix in that it does not use a 4-way solenoid valve. The Ion's solenoid valve only has three hoses: one to provide air to the solenoid, one to provide air to a reservoir chamber behind the bolt, and the other which provides air to the front of the bolt to hold it back while the marker is at rest. The solenoid thus directs air either to the front of the bolt when not firing, or to the air reservoir behind the bolt, to blow it forward.

When the Ion is fired, the air in front of the bolt that holds it back is drained back through the solenoid, which causes the air in the rear of the firing chamber to blow the bolt forward. In order to expedite the draining of air from the front of the bolt, many users add a quick exhaust valve (QEV) to their marker. The QEV replaces a fitting on the body of the Ion and allows the draining air to vent into the body cavity instead of passing all the way back through the solenoid. By allowing the air to vent faster, this allows the bolt to close faster and with more force, which allows the user to lower operating pressure and/or the time the solenoid valve is open (dwell). The QEV also acts as a trap for spare grease that would normally get into the solenoid and possibly cause problems.

Two other markers manufactured by Smart Parts, the SP-8 and the Epiphany, are based on the Ion's spool-valve design.


External links

* [ Smart Parts website]
* [ Smart Parts Ion Review] at
* [ Ion Technical Guide]

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Paintball marker — A paintball marker, also known as a paintball gun, is the central or main piece of equipment in the sport of paintball. Markers make use of an expanding gas such as carbon dioxide, compressed air or nitrogen dioxide to propel paintballs through… …   Wikipedia

  • Shocker (paintball marker) — paintball gun|Smart Parts Ion title= Smart Parts Ion caption= A blue Shocker NXT marker type=Electropneumatic action=Semi Automatic, Rebound, Three Round Burst, Full Automatic barrel=14 inches bore= rof=20 balls per second price= $725 USD… …   Wikipedia

  • Electropneumatic paintball marker — An electropneumatic paintball marker is any of a class of paintball markers that utilizes a pneumatic solenoid to actuate the hammer and/or bolt s movement.History and basic operationThe origin of the electropneumatic paintball marker is the… …   Wikipedia

  • Ion (disambiguation) — In physics and chemistry, an ion is an atom or group of atoms with a net electric charge.Ion may also refer to:Ancient Greece* Ion (dialogue), a dialogue by Plato, between Socrates and Ion, a reciter of epic poems. * Ion (play), a play by… …   Wikipedia

  • Special Ops Paintball — Infobox Company company name = Special Ops Paintball company company type = TBA foundation = North Salt Lake City, New Hampshire location = North Salt Lake, Utah, U.S. key people = Jayson Orvis Jared Orvis Rory McCarthy Brandon Fratto Travis… …   Wikipedia

  • Sp-8 — paintball marker marker type=Spool Valve Electro pneumatic caption=Smart Parts SP 8 action=Semi Auto, Rebound, Three Round Burst, Full Auto barrel=14 inch, impulse threaded, muzzle break barrel bore=.689 rof=17 balls per second price= $350 USDThe …   Wikipedia

  • Proto SLG — paintball marker|Proto SLG caption= title= Proto SLG marker type=Sear Driven Spool Valve action=Semi Automatic, Millennium, PSP, and NXL barrel=Proto 1 piece ported bore=.690 rof=30 balls per second price=$200 USDThe Proto SLG is a paintball… …   Wikipedia

  • Planet Eclipse Ego — paintball gun|Smart Parts Ion title= Planet Eclipse Ego caption= 2008 Ego marker type=Poppet Valve Electropneumatic action=Semi Automatic with Ramp (NPPL, PSP, Millennium, CFOA modes) barrel=14 inch bore=.693 (stock) rof=capable of over 30 balls… …   Wikipedia

  • Smart Parts — It is a manufacturer of paintball markers and accessories based in Latrobe, PA. Their popular line of markers include the Shocker , Impulse , Nerve , Epiphany , SP 8 ,Sp 1, Vibe, and the Ion . The re designed Shocker has become very popular and… …   Wikipedia

  • Dye Matrix — A 2006 Dye Matrix The DYE Matrix is an electropneumatic paintball marker manufactured by DYE Precision. The first DYE Matrix, the Matrix LCD, was based on the E Matrix, the rights to which DYE purchased in 2003.[1] Subsequent models featured… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”